FIXED BLADE KNIVES

Now from Ka-Bar. Becker BK3 Tac Tool. Massive 7" black coated blade with 1/4" thick stock. Partially serrated. 14" overall. Black hard sheath. Knife made in USA.

From Ka-Bar, the Becker Campanion Plain Edge Fixed Blade.  5" black plain edge blade of 1/4" thick stock.  Full tang construction.  10 1/2" overall.  Black nylon sheath with hardshell insert.

Knife made in USA

Designed for those who don’t see Mountains, but Opportunities! When climbing any outdoor challenge, an Explorer and the Mountain forge a PASS together using skill, determination, nature’s openings, and the right tools. Just as the name implies, the new Mountain PASS Series by Condor is designed to help you through the toughest challenges. These designs by Jason Breeden, a West Virginia native who has spent his life in the hills and hollows, are mapped out by following the fundamental principles used by traditional woodsmen. As rugged and venerable as the Appalachians that inspired them, the Mountain PASS Series combines Condor’s craftsmanship with modern materials to prevail through Plain And Simple Survival.

SPECIFICATIONS:

--BLADE:  6.26 in (158.9 mm)

--OAL:  10.57 in (268.3 mm)

--THICKNESS:  0.14 in (3.5 mm)

--WEIGHT:  10.94 oz (310.0 g)

--MATERIAL:  440C Stainless Steel

--FINISH:  Condor Classic

--GRIND:  Flat Grind w/ Second Belvel

--HANDLE:  Micarta®

--SHEATH:  Hand Crafted Welted Leather

El Salvador

Ka-Bar 1219 U.S. Army marked partially serrated fighting knife.

  The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials. Tang stamped U.S. ARMY. U.S. Army stamped leather sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  U.S. ARMY--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--KNIFE MANUFACTURED IN:  United States--SHEATH MANUFACTURED IN:  Mexico--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches

The Boker Plus Mini Tracker, designed by Dave Wenger, quickly became a favourite in the camping and bushcraft scene, as the sturdy outdoor knife with its massive blade made of 1095 carbon steel and corrosion-resistant powder coating is still convincing all along the line. The fully-grown Boker Plus Tracker is now pulling out of its slipstream. The same materials, the same features, but an incomparable performance! The top-heavy blade of the solid survival knife is equipped with two different grinding surfaces and is ideal for chopping, cutting, scraping, digging and levering. The optimal balance of blade thickness and length as well as the ergonomic shape of the finely textured Micarta handle scales allow for fatigue-free work. The handle has three decorative hollow brass rivets, the rear of which can be used as a lanyard hole. Supplied with a belt adapter and a custom-fit Kydex sheath.

SPECIFICATIONS:--Overall Length:  12.28 in--Blade Length:  7.20 in--Blade Thickness:  0.24 in--Weight:  16.72 oz--Designer:  Dave Wenger--Blade Material:  1095--Handle Material:  Micarta--Handle Color:  Brown--Blade Color:  Black--Item Number:  02BO073   PRC

Jason Breeden designed Condor 1827-10.5-4C Chute Knife. 

Holding to classic tactical edged tools that can function in the many fields of operation, Jason Breeden designed his twist on the Tactical P.A.S.S. Chute Knife. Keeping close to the P.A.S.S. roots of function in the outdoors, the Chute Knife has an edge that comes right to the guard, with a customary false edge that flows right into the fuller.

SPECIFICATIONS:

--BLADE:  5.45 in (138.3 mm)

---OAL:  10.54 in (267.6 mm)

--BLADE THICKNESS:  0.14 in (3.5 mm)

--WEIGHT:  14.46 oz (410.0 g)

--BLADE MATERIAL:  440C Stainless Steel

--BLADE FINISH:  Condor Classic

--BLADE GRIND: Flat Grind w/ Secondary Bevel

--HANDLE:  Micarta®

--SHEATH:  Hand Crafted Welted Leather

El Salvador

The Tom Brown Tracker has been one of the most popular blades produced by TOPS for many years. It is one of the biggest, beefiest multi-tools in existence. Designed by Tom Brown Jr. and featured in the movie "The Hunted". TOPS is proud to present the Tom Brown Tracker in 154cm stainless steel. The Tracker #3 is slightly larger than the Tracker #2 but slightly smaller than the Tracker #1. This design was made for chopping, skinning, carving, gutting, scoring, cutting, slashing, slicing, and just about anything else you would need to do in the wilderness.
SPECIFICATIONS:--Overall Length: 10.75"--Cutting Edge: 5.50"--Blade Thickness: 0.190"--Hardness: RC 58-60 Cryo Treated--Blade Finish: Tumble Finish
--Handle Material: Black Canvas Micarta--Knife Weight: 13.8oz--Weight w/ Sheath: 18.4oz--Sheath Included: Yes--Sheath Material: Black Kydex--Sheath Clip: Rotating Spring Steel--Designer: Tom Brown, Jr.
USA

--Notice - this is an unsharpened Trainer blade.
The red trainer variant of the SOCP dagger or knife, this training tool integrates into the same sheath that accepts both the 176 and 178 models so the kit placement and training integrate seamlessly with real world application. MOLLE® compatible.
SPECIFICATIONS:
Specifications
--Designer: Greg Thompson
--Blade Steel: 440C
--Blade Finish: Red
--Blade Length: 2.78" | 7.06cm
--Blade Thickness: 0.175" | 4.45mm
--Overall Length: 6.81" | 17.30cm
--Handle Length: 4.03" | 10.24cm
--Handle Thickness: 0.175" | 4.45mm
--Weight: 2.31oz. | 65.49g
--Sheath: Tan Injection Molded Plastic with Clip and Cord
--Sheath Weight: 1.00oz. | 28.35g
TRAINER
USA

ESEE 5PDT-004 Fixed Blade Knife. Desert Tan plain edge drop point blade with 3D Blood Red/Black G-10 handle scales.
Designed by SERE instructors for downed pilots, then ESEE-5 series is a serious no-nosense survival tool you should not be without. Folks, this is a beast! Comes with ESEE's lifetime warranty.
SPECIFICATIONS AND FEATURES--Blade Finish: Desert Tan Powder Coat--Blade Grind: Flat Saber--Blade Shape: Drop Point--Blade Edge: Plain Edge--Hardness: 55-57RC--Handle: 3D Blood Red/Black G-10--Pommel: Original (sharpened)--Construction: Full Tang--Blade Length: 5 1/2"--Cutting Edge: 5 3/8"--Max Blade Thickness: 0.258"--Overall Length: 11"--Handle Length: 5 1/2"--Handle Thickness: 0.765"--Lanyard Hole: Yes--Weight: 16 oz (Knife Only)--Sheath: Molded Hardshell - Black - Clip Plate - Paracord - Cord Lock - Sheath MOLLE Lock compatable (MOLLE Locks sold separately)
Country of Origin: USA
**ESEE knives are made from 1095 High Carbon Steel. While 1095 is a top choice for professional cutlery designed for hard use, it will rust and stain if not properly cared for, especially on the cutting edge and around the laser engraving. It is the user's responsibility to keep the blades properly lubricated and cleaned. ESEE Knives suggest using a dry film rust inhibitor such as Tuf-Glide or Tuf-Cloth. We use it here in the store and at home. Great stuff

The KA-BAR Jarosz Turok is made in the USA from 1095 Cro-Van steel. It measures 11.5" overall, features a blade with a 6.25" length and 1.563" width, and is comes with a Celcon® (plastic) sheath. The Jarosz family has a long and proud tradition of working with their hands to produce quality products, from woodworking to general carpentry. Jesse used his family's knowledge, work ethic, and access to equipment at a young age to build the skills that would lead to the creation of Jarosz Knives. SELECT SPECS: --1095 Cro-Van blade steel. --Ultramid handle scales over full-tang constuction. --Blade Length: 6.25" --Blade Thickness: 0.188" --Blade Grind: Flat --Overall Length: 11.5" --Sheath included. USA

KA-BAR Wide Blade Black Fighter Features a 8.00 in. clip point partially serrated blade of 1095 carbon steel with black powder coating, and a 4.88 in. black Kraton handle. Comes complete with a leather/Cordura sheath.