Menu
Filter By
FIXED BLADE KNIVES
Active filters
- Brand: Spyderco
-
![Bread Knife SE]()
Bread Knife SE
$79.90Spyderco Bread Knife Serrated Edge with Black handle. Features a 10 1/4" fully serratedblade of premium MBS-26 stainless steel that is meticulously heat treated and ground exceptionally thin for optimum cutting performance. Handle is Black polypropylene thas is direct injection molded onto the tang of the blade. The handle has a distinctive "stepped" texture pattern that provides comfort and control during use. 15 1/2" overall. Hand wash and dry recommended. SEKI CITY -
![Szabo Warrior Hawk D2]()
Szabo Warrior Hawk D2
$412.50This Laci Szabo designed Spyderco Warrior Hawk features a single piece body of durable D2 tool steel finished with a black titanium carbonitride (TiCN) coating. The head is compound ground with a spike on the back of the head. Machined black G-10 handles provide a sound and secure grip. There is also incorporated into the handle a stout pry tip. Comes with a custom-molded Boltaron carry sheath and arrives packaged in a padded zipper pouch. Tiawan -
![Yojimbo 2 Black BLK Blade PE]()
![]()
Yojimbo 2 Black BLK Blade PE
$232.50This Michael Janich Design Yojimbo features a 3 1/4" matte black DLC coated plain edge blade of CPM S30V stainless steel. Compression lock. Back G-10 handles. BlackStainless pocket clip. Drilled and tapped on all four corners for tip-up, tip down left or right side carry. All black hardware. 4 1/2" closed. USA -
![Zoomer]()
![]()
Zoomer
$420.00This Thomas Zoomer designed Spyderco fixed blade features a 5 1/4" zero ground hamaguri (convex) edge blade of CPM-20CV stainless steel. Machined black G-10 handle scales over a full length tang that exposes a hammer surface. The handle is thoughtfully designed to work well in the hand for long periods and features an extended shelf on spine of blade that provides additonal leverage when required. Leather belt sheath with ceramic sharpening rod and accessory pouch. 10" overall Taichung -
![Spyderthrower Large]()
Spyderthrower Large
$116.20Designed by Canadian custom knifemaker Harald Moeller in collaboration with Spyderco, this three knife set is right on target. Each of the three knives in the large set are 11" long and 0.217" thick. The two tone blade is made of 8Cr13MoV stainless steel. Comes with a triple tiered leather sheath. PRC
-
![Z-Cut PE Pointed Red]()
Z-Cut PE Pointed Red
$25.50Spyderco Z-Cut Offset Kitchen Knife with Pointed Plain Edge CTS-BD1N Stainless blade and Red Polypropylene Handles. The USA made Z-Cut series of kitchen knives from Spyderco offers lightweight performance for most any utility job in the kitchen. The no - nonsense design keeps the knife affordable, but the high quality blade steel and polypropylene handle provides a high quality knife. SPECIFICATIONS: --Blade Steel: CTS-BD1N Nitrogen-enriched Stainless Steel --Blade Grind: Flat --Blade Edge: Plain --Blade Point: Pointed --Handle: Red Polypropylene --Blade Length: 4 3/8: --Overall Length: 8 3/4" USA -
![Z-Cut PE Pointed Green]()
Z-Cut PE Pointed Green
$25.50Spyderco Z-Cut Offset Kitchen Knife with Pointed Plain Edge CTS-BD1N Stainless blade and Green Polypropylene Handles. The USA made Z-Cut series of kitchen knives from Spyderco offers lightweight performance for most any utility job in the kitchen. The no - nonsense design keeps the knife affordable, but the high quality blade steel and polypropylene handle provides a high quality knife. SPECIFICATIONS: --Blade Steel: CTS-BD1N Nitrogen-enriched Stainless Steel --Blade Grind: Flat --Blade Edge: Plain --Blade Point: Pointed --Handle: Green Polypropylene --Blade Length: 4 3/8: --Overall Length: 8 3/4" USA -
![Z-Cut PE Pointed Black]()
Z-Cut PE Pointed Black
$25.50Spyderco Z-Cut Offset Kitchen Knife with Pointed Plain Edge CTS-BD1N Stainless blade and Black Polypropylene Handles. The USA made Z-Cut series of kitchen knives from Spyderco offers lightweight performance for most any utility job in the kitchen. The no - nonsense design keeps the knife affordable, but the high quality blade steel and polypropylene handle provides a high quality knife. SPECIFICATIONS: --Blade Steel: CTS-BD1N Nitrogen-enriched Stainless Steel --Blade Grind: Flat --Blade Edge: Plain Edge --Blade Point: Pointed --Handle: Black Polypropylene --Blade Length: 4 3/8: --Overall Length: 8 3/4" USA -
![Santoku PE Black]()
Santoku PE Black
$86.70The Spyderco Kitchen Knife Series has been resurrected utilizing their original MBS-26 blade steel. This Santoku Japanese butcher's knife features a thin, flat ground straight edge MBS-26 stainless blade. The steel was chosen specifically by Spyderco for kitchen use as it has proven edge retention, sharpness and excellent cutting performance. A comfortable black Sermollan handle is affixed and has both vertical and horizontal channels for a positive grip. Blade length: ~7". Overall length: 12" Seki City -
![Paring Knife Red SE]()
Paring Knife Red SE
$45.90Spyderco Kitchen Paring Knife. Features a 4 1/2" flat ground satin serrated edge blade of MBS-26 Stainless. Red Sermollan handle is a lightweight rubberized plastic with a semi-soft texture to provide a secure grip even when wet. 9" overall. Seki City -
![Paring Knife Black SE]()
Paring Knife Black SE
$45.90Spyderco Kitchen Paring Knife. Features a 4 1/2" flat ground satin serrated edge blade of MBS-26 Stainless. Black Sermollan handle is a lightweight rubberized plastic with a semi-soft texture to provide a secure grip even when wet. 9" overall. Seki City -
![Paring Knife Black PE]()
Paring Knife Black PE
$45.90Spyderco Kitchen Paring Knife. Features a 4 1/2" flat ground satin plain edge blade of MBS-26 Stainless. Black Sermollan handle is a lightweight rubberized plastic with a semi-soft texture to provide a secure grip even when wet. 9" overall. Seki City -
![Kitchen Utility Blue SE]()
Kitchen Utility Blue SE
$54.40Spyderco Kitchen Utility Knife Serrated Spyder Edge with Blue handle. Features a 6.5 inch drop point fully serrated edge blade of premium MBS-26 stainless steel that is meticulously heat treated and ground exceptionally thin for optimum cutting performance. Handle is Blue polypropylene thas is direct injection molded onto the tang of the blade. The handle has a distinctive "stepped" texture pattern that provides comfort and control during use. 10 3/4" overall. Hand wash and dry recommended. SEKI CITY -
![Nightstick Boot Knife]()
![]()
Nightstick Boot Knife
$252.00Spyderco FB47GP Nightstick Boot Knife with CPM S30V Blade Steel and polished Black G-10 handle scales. Designed by Gayle Bradley, the Nightstick is a classic bootknife with clean thin lines. The Nightstick features a single edge flat ground satin finished dagger blade of CPM S30V Stainless. Polished Black G-10 handle scales over a full tang construction give the Nightstick a solid feel in the hand. An adjustable Black Boltaron Sheath with Clip provides versitility in carry. SPECIFICATIONS: --Blade Steel: CPM S30V Stainless. --Blade Edge: Plain edge (only one edge sharpened) --Blade Finish: Satin --Handle Material: Polished Black G-10 --Full Tang Construction. --Blade Length: 4 1/8" --Overall Length: 8 3/8" Taichung -
![Bow River]()
![]()
Bow River
$52.50Spyderco FB46GP Bow River Value EDC Fixed Blade Knife. The Spyderco Bow River is designed by Phil Wilson. The Bow River is a value priced EDC fixed blade featuring 8CR13MoV stainless steel. Black and Wihite layered G-10 over full tang constuction for sure grip and strength. The Spyderco Bow River is a solid little knife that won't let you down and doesn't cost so much that you will be afraid to use or carry it in the field. SPECIFICATIONS: --Blade Steel: 8CR13MoV Stainless --Blade Shape: Trailing Point --Blade Grind: Full Flat Grind --Blade Edge: Plain Edge --Handlel Material: Layered Black and White G-10 over full tang construction. --Blade Length: 4.4" --Overall Length: 8.14" --Weight: 3.9 oz High Quality Leather Sheath included. --Brand: Spyderco --Model Name: Bow River --Model Number: FB46GP --Item Number: SCFB46GP Country of Origin: PRC -
![Spyderco Waterway]()
![]()
Spyderco Waterway
$175.00The Spyderco Waterway was designed by knife enthusiast and professional kayak fisherman Lance Clinton. The Waterway is the result of Clinton's vision for an ultra corrosion resistant knife for fishing tasks, that would still remain well suited to general outdoor and utility use. To achieve that vision, the Waterway is contructed from LC200N steel, a state of the art high nitrogen alloyed tool steel that offers extreme corrosion resistance and toughness even at high hardness. To maximize it's strength and balance, the Waterway features full tang construction. The G10 handle scales have been 3D machined with a raised diamond pattern to provide a non-slip grip in any environment. These scales are attached via a specialized process which uses blind pins and a high strength industrial adhesive to ensure a permanent, water tight bond. The Waterway ships with a custom molded Boltaron sheath with a versatile G-Clip attachment. The snap-fit sheath retains the knife securely, while still allowing a smoth draw and easy access to the knife. The G-Clip can be configured to provide a full range of carry options. Specs: Weight: 4.3 ounces Overall Length: 9.5" Blade Length: 4.44" Blade Steel: LC200N Blade Thickness: 0.120" Blade Shape: Drop Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: 3D Machined G10 Country of Origin: USA
