Kershaw

Where have you seen this profile before? Thats right. The new Kershaw Natrix is based on brother brand Zero Tolerances 0770, which itself was inspired by the award-winning ZT 0777. The design has apparently been the envy of certain other knifemakers. And now were taking it back. Kershaws new Natrix features a drop-point blade of 8Cr13MoV that offers solid performance with good edge-holding and easy resharpening. The stonewashed blade finish looks good and even helps hide use scratches. Accessed with the built-in flipper, SpeedSafe assisted opening makes it easy to open the Natrix one-handed so its always ready when you need it. The handle is lightweight G-10, 3D-machined and chamfered to fit comfortably in the hand. An oversized pivot provides an attention-grabbing detail on the front of the knife, while our patented Sub-Frame Lock secures the blade and provides a dramatic, contrasting line on the back. The Kershaw Sub-Frame Lock is covered under US Patent 69.120.234. The Sub-Frame Lock design also enables us to lighten the weight of the Natrix, so that you get a big, useful blade in a knife that still weighs in at a mere 2.9 ounces. A decorative aluminum backspacer lightens the load even further and adds another embellishment. Finally, a custom-designed deep-carry pocketclip echoes the lines of a special recess machined into the handle to complete this good-looking knife. Now the next time you see this famous knife profile, it will be from a manufacturer that has a right to the design: Kai. SELECT SPECS: --SpeedSafe® assisted opening --Steel Sub-Frame Lock --Flipper --Reversible deep-carry (left/right, tip-up) pocketclip --Steel: 8Cr13MoV, stonewashed finish --Handle: G-10 --Blade length: 3.25 in. (8.3 cm) --Closed length: 4.25 in. (10.8 cm) --Open length: 7.5 in. (19.1 cm) --Weight: 2.9 oz. (82.2 g) PRC

Assisted opening. 4" closed. 3" Damascus steel blade. Black Tungsten DLC stainless handle. Extended tang. Thumb stud. Pocket clip. Lanyard hole. Features the Speed-Safe torsion bar mechanism. USA

Where have you seen this profile before? Thats right. The new Kershaw Natrix is based on brother brand Zero Tolerances 0770, which itself was inspired by the award-winning ZT 0777. The design has apparently been the envy of certain other knifemakers. And now were taking it back. Kershaws new Natrix features a drop-point blade of 8Cr13MoV that offers solid performance with good edge-holding and easy resharpening. The Blackwashed blade finish looks good and even helps hide use scratches. Accessed with the built-in flipper, SpeedSafe assisted opening makes it easy to open the Natrix one-handed so its always ready when you need it. The handle is lightweight G-10, 3D-machined and chamfered to fit comfortably in the hand. An oversized pivot provides an attention-grabbing detail on the front of the knife, while Kershaw's patented Sub-Frame Lock secures the blade and provides a dramatic, contrasting line on the back. The Kershaw Sub-Frame Lock is covered under US Patent 69.120.234. The Sub-Frame Lock design also enables them to lighten the weight of the Natrix, so that you get a big, useful blade in a knife that still weighs in at a mere 2.9 ounces. A decorative aluminum backspacer lightens the load even further and adds another embellishment. Finally, a custom-designed deep-carry pocketclip echoes the lines of a special recess machined into the handle to complete this good-looking knife. Now the next time you see this famous knife profile, it will be from a manufacturer that has a right to the design: Kai. SELECT SPECS: --SpeedSafe® assisted opening --Steel Sub-Frame Lock --Flipper --Reversible deep-carry (left/right, tip-up) pocketclip --Steel: 8Cr13MoV, Blackwashed finish --All black hardware --Handle: G-10 --Blade length: 3.25 in. (8.3 cm) --Closed length: 4.25 in. (10.8 cm) --Open length: 7.5 in. (19.1 cm) --Weight: 2.9 oz. (82.2 g) PRC

The brilliant orange color of this Leek’s anodized-aluminum handle is a fade-resistant, scratch-resistant dye that’s permanently bonded to the aluminum—so it looks good now and will continue to look good later. The business end of the knife is a task-ready 3-inch blade of 14C28N stainless steel. This high-performance steel enables us to ensure the Leek’s blade is razor sharp out of the box and holds that edge for a long time.

FEATURES:

--Bright, “see me” orange handle

--Made in the USA

--14C28N high-performance stainless steel blade holds its edge, resharpens easily --Stonewashed finish hides use scratches so your knife looks like new longer

--Anodized aluminum handle is comfortable, scratch and fade resistant

--Kershaw's assisted opening with convenient flipper 

--Tip-Lock secures blade when closed

SPECS:

--Blade Length:  3 in. (7.6 cm)

--Blade Material:  14C28N

--HRC:  58-60

--Blade Finish/Coating:  Bead-blasted finish

--Blade Thickness:  0.09 in. (2.29 mm)

--Closed Length:  4 in. (10.2 cm)

--Handle Material:  6061-T6 aluminum

--Handle Finish/Coating:  Orange anodized

--Handle Thickness:  0.35 in. (8.9 mm)

--Overall Length:  7 in. (17.9 cm)

--Weight:  2.4 oz. (68 g)

USA

The toughest cutting chores are no match for the Helitack. This work-ready Kershaw opens every time with assisted opening and a flipper. Use the Helitack confidently with the help of a secure frame lock and overtravel stop. The blade is over 3.25 inches, plenty of cutting area for even the most resilient everyday tasks. A matching gray PVD finish on the blade and handle keep this folder looking sharp during your travels. The lengthy, deep-carry pocket clip makes carrying the Helitack even better. For a slim, yet durable work tool, the Helitack has your back.

FEATURES AND SPECIFICATIONS:

--Blade Style:  Drop Point

--Blade Edge:  Plain

--Opening Action:  Assisted

--Opens With Flipper

--Lock Type:  Frame lock, lockbar-overtravel stop

--Pocketclip:  Reversible extra-deep-carry (right/left, tip-up)

--Handle Color:  Gray

--Hardware Black-oxide screws, black-oxide pocket clip

--Blade Length:  3.26 in. (8.3 cm)

--Blade Material:  8Cr13MoV

--Blade Finish/Coating:  Gray PVD coating

--Blade Thickness:  0.11 in. (2.8 mm)

--Closed Length:  4.49 in. (11.4 cm)

--Handle Material:  Stainless steel

--Handle Finish/Coating:  Gray PVD coating

--Handle Thickness:  0.44 in. (11.2 mm)

--Overall Length:  7.75 in. (19.7 cm)

--Weight:  3.8 oz. (108 g)

PRC