Spyderco Limited Edition

Active filters

  • Spyderco Military PE LEFTY

    $217.00
    A Limited Production LEFT HAND version of the popular full size Spyderco Military. Specs: Blade Steel: CPM S30V. Blade Thickness: 5/32" 4mm Diam. Blade Hole: 9/16" 14mm Edge Type: PlainEdge Handle Material: Black G-10 Length Blade: 4" 102mm Length Closed: 5 1/2" 139mm Length Overall: 9 1/2" 242mm Black pocket clip oriented for left side tip-down carry. Weight: 4oz 113g USA
    In Stock
  • Snap-it H1 SE

    $73.50
    The Spyderco Snap-it features a shackle that allow the knife to be attached to a D-Ring, carabiner or similiar platform to hang in a position that is easily accessible. 3" fully serrated blade of H1 stainless steel. Yellow FRN handles with black Kraton insert. Blade and all hardware are 100% rustproof. 5 1/8" total closed length including the shackle. Seki City
    In Stock
  • Alcyone

    $77.00
    The Spydero Alcyone is a pocket-friendly and affordable high quality everyday carry knife. The Alcyone features a 2 7/8" flat ground plain edge blade of American made CTS BD1 stainless steel. High traction checkered Gray G-10 handle scales (you may see a little green if your eyes are like mine). Full skeletonized steel liners. Linerlock. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry. 4 1/8" closed. PRC
    In Stock
  • Gauntlet Premium Edition

    $115.50
    Spyderco 603FCBN Gauntlet Premium Edition Sharpener with one pair of FINE ceramic rods and one pair of fast-cutting Cubic Boron Nitride (CBN) rods. The Gauntlet is a simple, easy-to-use sharpening system that enables even novice users to achieve razor-sharp edges in just a few minutes without electricity, oil, water, or complicated clamps or fixtures. Its injection-molded, high-impact-plastic base has an integral handguard and specially designed holes that hold abrasive rods at the perfect 40-degree angle (20 degrees per side) to create keen, long-wearing edges. The star-shaped holes allow the rods to be turned to expose fresh abrasive surfaces or to orient the edges of the rods for sharpening serrated edges. Sharpens multiple edges, such as plain edge, partially serrated and fully serrated - as well as multiple blade profiles such as Hawkbill, Standard, Recure, Reverse and Wharncliffe. --Brand: Spyderco --Model Name: Gauntlet Premium --Model Number: 603FCBN --Item Number: SC603FCBN Country of Origin: USA and PRC
    Last items in stock
  • Zoomer

    $420.00
    This Thomas Zoomer designed Spyderco fixed blade features a 5 1/4" zero ground hamaguri (convex) edge blade of CPM-20CV stainless steel. Machined black G-10 handle scales over a full length tang that exposes a hammer surface. The handle is thoughtfully designed to work well in the hand for long periods and features an extended shelf on spine of blade that provides additonal leverage when required. Leather belt sheath with ceramic sharpening rod and accessory pouch. 10" overall Taichung
    Last items in stock
  • Spyderco Darn Dao

    $455.00
    Spyderco FB41GP Bob Lum Darn Dao fixed blade. Designed by the late Bob Lum, the Darn Dao is based on a martial arts broadsword. This massive knife features a 10.63" flat ground plain edge blade of CPM 154 Stainless Steel. A semi-sharp swedge lends a striking profile to the blade. Black polished and contoured G-10 handle fixed to the full tang with two rivets and lanyard hole. Overall length is a massive 16.27". Weight 18.4 ounces. Includes high quality leather sheath. FLASH BATCH of 1200. Each knife individually serial numbered. Tiachung
    Last items in stock
  • Perrin Street Bowie

    $121.45

    Estimated delivery April 2013 (LOL).  Email the store with "Spyderco Perrin Street Bowie" in the subject line.  We will notify you when these arrive.

    Spyderco Perrin designed Street Bowie.  VG-10 plain edge blade.  FRN handle with Kraton Rubber Insert.  Injection molded polymer sheath.  Non-reflective Ceramic coated blade.

    Last items in stock
  • McBee PE

    $161.00
    The Jonathan McNees designed Spyderco C236TIP McBee is a super compact but extremely strong and capable folding pocket knife. Features a 1 1/2" Saber Ground Plain edge Wharncliffe blade of CTS-HXP stainless steel. Gray Titanium handles with Framelock. Pocket clip. Closed length is only about 2 1/4". Super small, super strong and unbelievable comfortable in the hand. Taichung
    Last items in stock
  • Squeak Pink PE

    $70.00
    Spyderco C154PPN Squeak The Spyderco Squeak is a non-locking slip-joint knife featuring a 2" flat ground plain edge blade of Austrian Bohler-Uddeholm N690Co high carbon steel. Textured jimping on the spine and finger choil. Pink FRN handle. Reversable wire pocket clip. Italy
    Last items in stock
  • Squeak Black PE

    $62.30
    Spyderco C154PBK Squeak The Spyderco Squeak is a non-locking slip-joint knife featuring a 2" flat ground plain edge blade of Austrian Bohler-Uddeholm N690Co high carbon steel. Textured jimping on the spine and finger choil. Black FRN handle. Reversable wire pocket clip Italy
    Last items in stock
  • Sage 5 - Black DLC CPM-M4...

    $164.00

    *NOTE: THIS KNIFE IS MARKED WITH A SPYDERCO COLLECTOR CLUB NUMBER*

    This limited run Spyderco Sage 5 features Mint Green FRN handle scales and a Black DLC finished CPM-M4 plain edge blade

    Out of Stock
  • C28 Dragonfly Wood Knife Kit

    $13.30
    The Spyderco Dragonfly Wooden Knife Kit makes a wonderful introduction to the craft of knife making. It is a Complete wooden pocket knife kit in a box. Genuine Spring-Action. This Dragonfly kit is a craft project for adults and children to do together. Kit contains small parts. Adult supervision is required. Not recommended for children under 7 years old. Includes all parts and instructions needed to make a wooden replica of the popular Dragonfly pocket knife. All you need to supply is sandpaper. The included wooden blade is unsharpened. Kit containes 5 pieces of precut wood, 4 metal pins and instruction card. USA
    Out of Stock
  • Ladybug GITD

    $49.00
    The Ladybug is the smallest knife in Spyderco's lightweight lineup, making it ideal as a keychain knife or as a super lightweight EDC. This limited run version of the Ladybug features Glow in the Dark FRN handles paired with a VG-10 blade. Specs: Overall Length: 4.44" Blade Length: 1.97" Blade Thickness: 0.80" Blade Steel: VG-10 Blade Grind: Saber Weight: 0.70 Oz Handle Material: Glow in the Dark FRN Country of Origin: Japan
    Out of Stock
  • Fish Hunter

    $98.90
    Spyderco FB40SYL Fish Hunter with fully serrated H-1 Stainless Steel blade. A great addition to the Spyderco Salt Series for fishermen and free divers. The Spyderco Fish Hunter features a 4 1/8" symmetrical hollow-ground Serrated blade of H-1 Stainless steel. H-1, as you may know if you are a Spyderco fan, is a radically different alloy that uses nitrogen instead of carbon to create the blade's steel-like properties. The mechanical (not heat treating) process that hardens the steel creates a blade that holds an excellent edge, is incredibly strong and flexible and is completely impervios ro rust. The yellow fiberglass reinforced nylon (FRN) handle features high-traction Bi-Directional Texturing and a generous palm swell for secure grip. The Spyderco Fish Hunter comes with an injection-molded, snap-fit polymer sheath that includes a fully configurable G-Clip attachment for belt wear or lashing or zip-tying to other gear. 9" overall. Seki City
    Out of Stock
  • Snap-it H1 PE

    $69.95
    The Spyderco Snap-it features a shackle that allow the knife to be attached to a D-Ring, carabiner or similiar platform to hang in a position that is easily accessible. 3" plain edge blade of H1 stainless steel. Yellow FRN handles with black Kraton insert. Blade and all hardware are 100% rustproof. 5 1/8" total closed length including the shackle. Seki City
    Out of Stock
  • Subvert PE

    $378.35
    Designed by Israeli goldsmith and custom knifemaker Nati Amor, the Spyderco Subvert faithfully translates all the key qualities of his handcrafted 'Sabotage' design into a premium-quality production folder. Its dramatically styled blade is crafted from CPM® S30V® particle metallurgy stainless steel and features a broad profile, pronounced belly, and full-flat grind for maximum edge length and extreme cutting performance. The satin-finished blade also has a fully accessible Trademark Round Hole and rides on twin ball-bearing pivot washers that ensure an ultra-smooth one-hand-opening action. The Spyderco Subverts handle is built on a framework of thick, skeletonized titanium liners that give it outstanding structural strength and form the foundation of its stout LinerLock mechanism. They are capped by contoured orange G-10 scales and joined by a matching G-10 backspacer that provides additional strength while allowing an easy-to-clean open-backed construction style. A portion of the matte-finished liners is also exposed to allow access to a lanyard hole and to complement the aesthetics of machined accents on the knifes pivot pin. To allow the Subvert to be easily carried and keep it available for immediate access, its handle includes a polished stainless steel pocket clip configured for right-side, tip-up carry. SELECT SPECS: --Overall Length: 9.24" (235mm) --Blade Length: 4.14" (105mm) --Steel: CPM S30V --Closed Length: 5.10" (130mm) --Edge Length: 4.14" (105mm) --Weight: 6.2oz (176g) --Blade Thickness: 0.157" (4.0mm) --Handle: Titanium/G-10 --Clip Position: Right --Tip Carry Position: Tip-Up --Lock: TypeLinerLock --GrindFull-Flat --Sheath: N/A --Country of Origin: Taiwan
    Out of Stock