BRANDS

Civivi C200221 Chevalier Button Lock.  Looking like a small folding Chef's knife, this puppy features a 3 1/2" flat ground plain edge blade of 14C28N Stainless Steel.  Black G-10 handle scales over steel liners.  Buttonlock.  Flipper opening riding on caged ceramic bearing assembly.  Black pocket clip reversable for right of left side tip-up carry.

4 1/2" closed.

CIVIVI Limited Lifetime Warranty.

Comes with padded zippered case.

PRC

The best selling Kershaw Leek now featuring Magna Cut steel.   This popular every-day-carry pocket knife features a 2 7/8' black plain edge blade of Magnacut steel.  Red fade to black handle scales.  Linerlock.  Assisted Opening.  Flipper.  Black pocket clip.  4" closed.

USA

Where have you seen this profile before? Thats right. The new Kershaw Natrix is based on brother brand Zero Tolerances 0770, which itself was inspired by the award-winning ZT 0777. The design has apparently been the envy of certain other knifemakers. And now were taking it back. Kershaws new Natrix features a drop-point blade of 8Cr13MoV that offers solid performance with good edge-holding and easy resharpening. The Blackwashed blade finish looks good and even helps hide use scratches. Accessed with the built-in flipper, SpeedSafe assisted opening makes it easy to open the Natrix one-handed so its always ready when you need it. The handle is lightweight G-10, 3D-machined and chamfered to fit comfortably in the hand. An oversized pivot provides an attention-grabbing detail on the front of the knife, while Kershaw's patented Sub-Frame Lock secures the blade and provides a dramatic, contrasting line on the back. The Kershaw Sub-Frame Lock is covered under US Patent 69.120.234. The Sub-Frame Lock design also enables them to lighten the weight of the Natrix, so that you get a big, useful blade in a knife that still weighs in at a mere 2.9 ounces. A decorative aluminum backspacer lightens the load even further and adds another embellishment. Finally, a custom-designed deep-carry pocketclip echoes the lines of a special recess machined into the handle to complete this good-looking knife. Now the next time you see this famous knife profile, it will be from a manufacturer that has a right to the design: Kai. SELECT SPECS: --SpeedSafe® assisted opening --Steel Sub-Frame Lock --Flipper --Reversible deep-carry (left/right, tip-up) pocketclip --Steel: 8Cr13MoV, Blackwashed finish --All black hardware --Handle: G-10 --Blade length: 3.25 in. (8.3 cm) --Closed length: 4.25 in. (10.8 cm) --Open length: 7.5 in. (19.1 cm) --Weight: 2.9 oz. (82.2 g) PRC

FT01518

Morokniv Pro Robust with Gray and Black Handle and Carbon steel blade.

  This is a sturdy craft knife that can be used in many different situations. Designed for the craftsman, the knife is an excellent choice when you need a sturdy, reliable tool close at hand. It’s also easy to re-sharpen, so you can use it again and again.

  The ergonomic barrel-shaped polymer handle features a soft friction grip, sturdy finger guard and a 3.2 mm thick blade made of carbon steel, which provides both strength and stability in every cut. Thanks to the blade and handle design, the knife is ideal for working safely and efficiently in various weather conditions all year. The polymer sheath is equipped with the Morakniv Smart Button System which means you can attach several craft knives for different purposes to each other. It also has a practical belt clip for easy attachment to your belt. Carbon steel rusts, so wipe and oil the blade after use.

SPECIFICATIONS:

--Blade Length:  3 1/2"

--Overall Length:  8 1/8"

SWEDEN

FT01814

Morakniv Model 511 Basic - Red/Black Handle - Red Sheath - Carbon Steel Blade.

  Basic 511 is the most used of Mora's classic knives. This knife has been appreciated and loved by professionals and hobby craftsmen for generations. In other words, it’s a proper Morakniv.

The solid finger guard optimizes safety and the handle geometry makes the knife sit nice and steady in your hand. The blade is made of high quality carbon steel, manufactured in Mora according to our secret recipe. The carbon steel also makes the knife easier to re-sharpen so you can use it over and over again. However, keep in mind that carbon steel can be affected by moisture and corrosive environments so make it a habit to wipe your knife and oil the blade after using it.

SPECIFICATIONS:

--Blade Length:  3 1/2"

--Blade Steel:  Carbon

--Blade Grind:  Flat with Scandi edge

--Blade Finish:  Polished

--Blade Edge:  Plain

--Handle Material:   Polypropene

--Sheath Material: Polymer

--Overall Length:  8"

SWEDEN

Kershaw 1645 Lateral

 Take the Lateral to work, and it will get the job done. The Lateral snaps into action with Kershaw's assisted opening. Its wide drop point blade features a slight recurve and is great for difficult cutting tasks. The swooping handle texture is plenty ergonomic, too. And the reversible extra-deep-carry pocket clip rides subtly in the pocket during travel. The Lateral won’t break the bank, either. It’s the ideal work knife for your tool kit.

--Blade Length:  3.1"

--Overall Length:  7.4"

PRC

Kershaw 5560 Radar.

  Conquer work tasks with the strong, yet easy-to-carry Radar. Its all-steel construction goes dark with an attractive BlackWash™ finish. You can open the drop point blade reliably with assisted opening. The easy-to-sharpen 8Cr13MoV blade steel is heat treated for a sharp edge, and a hollow grind allows for precision cutting. Plus, the jimping on the blade and handle spine offer a comfortable grip. The Radar has plenty of carry options, too, with a four-position deep-carry pocket clip and lanyard hole. With so much versatility, this Kershaw should be on your Radar.

--Blade Length:  2.9"

--Overall Length:  6.7"

PRC

Kershaw 2078 Strata Cleaver.

  A large cleaver blade meets slim, modern design with the Strata - Cleaver. This kitchen-inspired 4-inch blade is great for slicing and chopping. D2 tool steel takes a sharp edge for repeated use. Despite its size, the balanced folder opens smoothly with KVT ball bearings. Grip the Strata - Cleaver with confidence using its G10 front handle and carry it on-the-go with an extra-deep-carry pocket clip. Completing the package are the eye-catching bronze PVD tube spacers and a pivot collar.

--Blade Length:  4"

--Overall Length:  9.3"

PRC

LOOKING FOR A GREAT KNIFE?  The Kershaw Leek just may be the ideal EDC. With its 3-inch blade, the Leek is a good-sized knife, but not too big. The slim design makes it easy to carry and its razor-sharp blade of high-performance Damascus means it can take care of a full range of cutting tasks. The blade is a modified drop-point, so its a good slicing knife, while the slim tip gives it piercing capability and the ability to do detailed work. Like other Onion knives, the Leek features the SpeedSafe ambidextrous assisted opening system. Whether you're left-handed or right-handed, just pull back on the flipper and the Leeks blade is ready to go to work. In addition to its Damscus blade, this Leek features a handle with genuine Carbon Fiber scales. For confident blade use, a secure liner-lock keeps the blade locked during use and a Tip-Lock slider locks the blade closed when folded. The pocketclip can be configured for tip-up or tip-down carry and the handle is drilled to accept a lanyard. SELECT SPECS: --SpeedSafe® assisted opening --Flipper --Liner lock, Tip-lock slider --Reversible pocketclip (tip-up/tip-down) --Steel: Damascus --Handle: Carbon Fiber Scales over dual steel liners --Blade length: 3 in. (7.6 cm) --Closed length: 4 in. (10.3 cm) --Overall length: 7 in. (17.9 cm)  USA

Direct from Rick Hinderer:

Genuine Hinderer Smooth Burgundy Micarta Handle scale for the 3" XM-18 3.0

Direct from Rick Hinderer:

Genuine Hinderer Textured OD Green Micarta Handle scale for the 3" XM-18 3.0

Direct from Rick Hinderer:

Genuine Hinderer Smooth OD Green Micarta Handle scale for the 3" XM-18 3.0

Direct from Rick Hinderer:

Genuine Hinderer Textured Black Micarta Handle scale for the 3" XM-18 3.0

Direct from Rick Hinderer:

Genuine Hinderer Smooth Black Micarta Handle scale for the 3" XM-18 3.0

Ka-Bar EK 51 Commando Short Drop Point.

  The EK51 Short Drop Point has a 4.3125” drop point blade and measures 8.5” overall.  The steel is 1095 Cro-Van and the a MOLLE-compatible Celcon® sheath is included.  The knife is manufactured in the USA with German steel and the sheath is manufactured in the USA.

SPECIFICATIONS:--WEIGHT:  0.6 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  4.312 inches--OVERALL LENGTH:  8.5 inches--EDGE ANGLES:  20--SHAPE:  Drop Point--TANG STAMP:  KA-BAR/Ek Commando--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Ultramid--ROCKWELL HARDNESS:  56-58--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.25 inches

USA