BRANDS

Old Timer 2 blade Small Canoe. Traditional Saw Cut Delrin handle scales. High Carbon Stainless Steel Spear and Pen blades. Brass pins and liners. 3" closed. Imported.

Spyderco FB41GP Bob Lum Darn Dao fixed blade. Designed by the late Bob Lum, the Darn Dao is based on a martial arts broadsword. This massive knife features a 10.63" flat ground plain edge blade of CPM 154 Stainless Steel. A semi-sharp swedge lends a striking profile to the blade. Black polished and contoured G-10 handle fixed to the full tang with two rivets and lanyard hole. Overall length is a massive 16.27". Weight 18.4 ounces. Includes high quality leather sheath. FLASH BATCH of 1200. Each knife individually serial numbered. Tiachung

Estimated delivery April 2013 (LOL).  Email the store with "Spyderco Perrin Street Bowie" in the subject line.  We will notify you when these arrive.

Spyderco Perrin designed Street Bowie.  VG-10 plain edge blade.  FRN handle with Kraton Rubber Insert.  Injection molded polymer sheath.  Non-reflective Ceramic coated blade.

Spyderco 603FCBN Gauntlet Premium Edition Sharpener with one pair of FINE ceramic rods and one pair of fast-cutting Cubic Boron Nitride (CBN) rods. The Gauntlet is a simple, easy-to-use sharpening system that enables even novice users to achieve razor-sharp edges in just a few minutes without electricity, oil, water, or complicated clamps or fixtures. Its injection-molded, high-impact-plastic base has an integral handguard and specially designed holes that hold abrasive rods at the perfect 40-degree angle (20 degrees per side) to create keen, long-wearing edges. The star-shaped holes allow the rods to be turned to expose fresh abrasive surfaces or to orient the edges of the rods for sharpening serrated edges. Sharpens multiple edges, such as plain edge, partially serrated and fully serrated - as well as multiple blade profiles such as Hawkbill, Standard, Recure, Reverse and Wharncliffe. --Brand: Spyderco --Model Name: Gauntlet Premium --Model Number: 603FCBN --Item Number: SC603FCBN Country of Origin: USA and PRC

The Spyderco Snap-it features a shackle that allow the knife to be attached to a D-Ring, carabiner or similiar platform to hang in a position that is easily accessible. 3" fully serrated blade of H1 stainless steel. Yellow FRN handles with black Kraton insert. Blade and all hardware are 100% rustproof. 5 1/8" total closed length including the shackle. Seki City

The Spyderco Snap-it features a shackle that allow the knife to be attached to a D-Ring, carabiner or similiar platform to hang in a position that is easily accessible. 3" plain edge blade of H1 stainless steel. Yellow FRN handles with black Kraton insert. Blade and all hardware are 100% rustproof. 5 1/8" total closed length including the shackle. Seki City

The Jonathan McNees designed Spyderco C236TIP McBee is a super compact but extremely strong and capable folding pocket knife. Features a 1 1/2" Saber Ground Plain edge Wharncliffe blade of CTS-HXP stainless steel. Gray Titanium handles with Framelock. Pocket clip. Closed length is only about 2 1/4". Super small, super strong and unbelievable comfortable in the hand. Taichung

This limited-edition Sprint Run expression of the Lil Native elevates this pocket-friendly design with a satin-finished blade crafted from premium CPM S90V, a vanadium-rich stainless steel renowned for its wear resistance and corrosion resistance. Equally unique, the knifes handle features solid carbon fiber scales, which are precision machined to house its Compression Lock mechanism and reversible deep-pocket carry clip. Specs: Overall Length: 5.90" Blade Length: 2.42' Blade Thickness: 0.125" Blade Grind: Full Flat Blade Steel: CPM S90V Weight: 2.4oz Pocket Clip: Tip Up Ambi Wire Clip Lock Type: Compression Lock Handle Material: Carbon Fiber Country of Origin: USA

Spyderco C158TIP2 Techno 2 The Spyderco Techno is a STOUT built-like-a-tank-knife in a smaller pocket knife's body crafted in collaboration with Polish knife maker Marcin Slysz. The high sabre ground CTA-HXP steel plain edge blade features a large Spyderhole and jimping on the spine for added control. The natural colored full titanium handle includes a Reeve Integral Lock with green handle spacers. Includes a reversible tip-up carry wire clip. Blade length: 2 1/2". Taichung

Spyderco C154PBK Squeak The Spyderco Squeak is a non-locking slip-joint knife featuring a 2" flat ground plain edge blade of Austrian Bohler-Uddeholm N690Co high carbon steel. Textured jimping on the spine and finger choil. Black FRN handle. Reversable wire pocket clip Italy

PRE-OWNED

Spyderco Endura with Zome Glow-in-the-Dark (GITD) FRN handle.  Features a 3 3/4" full flat ground plain edge black TiCN finished plain edge blade of VG-10 stainless steel.  Black Stainless pocket clip drilled and tapped on all four corners.  All black hardware.  Lock-back.  Seki City Japan

  Knife is as new.  No signs of use or carry.  Original factory edge.  Original box and paperwork in great condition.

NOTE  While as new, be advised we obtained this from a collection, so please consider it used.

The Spyderco Police 4 has been a staple in the Spyderco lineup since it was released in the 1980's. This Police 4 Lightweight follows in that tradition, but in a lighter, easier to carry form. The Police 4 Lightweight uses textured FRN handle scales to save nearly an ounce and half versus the traditional stainless steel handled version. The flat ground K390 blade makes this one an amazing slicer and allows for easy maintenance. Specs: Weight: 4.2 ounces Overall Length: 9.97" Blade Length: 4.39" Blade Steel: Bohler K390 Blade Thickness: 0.118" Blade Shape: Spear Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: Blue FRN Lock Type: Back Lock Opening Mechanism: Round Hole Pocket Clip: 4 posiiton Country of Origin: Japan NOTE: K390 is not a stainless steel. Proper care such as keeping blade clean, dry and oiled are necessary to help maintain the finish. Tarnishing, rusting, pitting etc are not a flaw in the steel, but simply a characteristic of this superior tool steel.

Each KIT contains all parts needed to make your own knife including handles, blade(s), liners, bolsters, backsprings, pins, etc. Some materials and tools YOU may need to supply include epoxy, sandpaper, masking tape, drill, drill bits, hammer, files, etc. Each kit comes with detailed assembly instructions. The RRCS3 KIT makes a full size 3 7/8" closed 3 blade Serpentine Stockman with stainless steel clip, spey and sheepfoot blades and brown rich grain wood handles. Now pay attention....YOU build this knife...and YOU may need to supply some of the materials and tools.....we supply the all the knife parts required. Imported.

Each KIT contains all parts needed to make your own knife including handles, blade(s), liners, bolsters, backsprings, pins, etc. Some materials and tools YOU may need to supply include epoxy, sandpaper, masking tape, drill, drill bits, hammer, files, etc. Each kit comes with detailed assembly instructions. The RRCS2 KIT makes a full size 4 1/8" two blade trapper with stainless steel clip and spey blades and brown rich grain wood handles. Now pay attention....YOU build this knife...and YOU may need to supply some of the materials and tools.....we supply the all the knife parts required. Imported.

Each KIT contains all parts needed to make your own knife including handles, blade(s), liners, bolsters, backsprings, pins, etc. Some materials and tools YOU may need to supply include epoxy, sandpaper, masking tape, drill, drill bits, hammer, files, etc. Each kit comes with detailed assembly instructions. The RRCS1 KIT makes a 5" closed lockback with brown rich grain wood handles and a 4" stainless steel clip blade. Now pay attention....YOU build this knife...and YOU may need to supply some of the materials and tools.....we supply the all the knife parts required. Imported.

ASC4 Rough Rider Alaska Scrimshaw Collection single blade lockback with Salmon artwork on front handle. Natural smooth bone handles. 2.75" mirror polished stainless clip point blade. Struck nickel-silver bolsters. 3.75" closed. PRC