BRANDS

PRE-OWNED

Here is an older Spyderco Persian 2 folding lockback.  3 7/16" upswept plain edge blade of VG-10 stainless.  Tang stamp embossed and not etched.  Black G-10 handle scales.  Black pocket clip.  I feel like the knife has been lightly carried and used.  May have been lightly sharpened.  Still a solid good looking large Persian 2.  No box.  Ships to you in a padded zippered pouch.

NOTE:  While in solid condition except some evidence of light carry and use, be advised we obtained this from a collection, so please consider it used.

PRE-OWNED

Here is a very nice lightly carried Spyderco Chinook 3.  Features a 3 3/4" full flat ground plain edge blade of CPM-S30V stainless.  Dual Stainless liners.  Lock-back.  Black pocket clip.  Handles drilled and tapped on all four corners for right or left side tip-up or tip-down carry.  Knife shows light carry on the G-10 but appears to have original factory edge and no signs of use.  No box.  Ships to you in padded zippered pouch.

NOTE:  While in excellent condition except some evidence of carry, be advised we obtained this from a collection, so please consider it used.

PRE-OWNED

Here is a very nice Benchmade 943 Osbourne Axis Lock with Clip Point blade.

Features a 3 3/8" satin finished plain edge blade of S30V stainless steel.  Matte Black finished aircraft grade aluminum handle.  Blue anodized back spacer.  Axis lock.  Black pocket clip.  I can't tell for sure if it has been carried or not - see some light indications, but may be simply from storage.  Original factory edge and does not appear to have ever cut anything.  Real nice example.  Original Benchmade pouch.  No box.  Ships to you in padded zippered pouch.

NOTE:  While in excellent condition, be advised we obtained this from a collection, so please consider it used.

PRE-OWNED 

Here for your consideration is a First Production marked (3XX/1000) Benchmade 760BK Bob Lum designed LFTi.  Features a 4" black plain edge tanto blade of M4 steel.  Dual thumb-studs.  Gray Titanium handles.  Framelock.  Black stainless pocket clip.  No signs of use or carry.  Original factory edge.  Original Benchmade pouch.  No box.  Ships to you in padded zippered case.

NOTE:  While in excellent condition, be advised we obtained this from a collection, so please consider it used.

PRE-OWNED - LIGHTLY USED

Here for your consideration is a lightly carried Spyderco C111G Captain designed by Jason Breeden.  It features a unique and stout 3" compound ground blade of VG-10 Stainless steel.  Skeletonized stainless steel liners and linerlock.  Black G-10 handle scales.  Black pocket clip.  Handle drilled on all four ends for tip-up, tip-down, right or left side carry.  4 1/8" closed.

Knife shows carry wear on G-10 and pocket clip.  Blade has one tiny nick on the edge - otherwise original factory edge.  Solid lock-up.  No box. Would not call this top grade collector condition, but is a solid EDC and a rareish pattern from Spyderco.  

Ships in a padded zippered pouch.

NOTE:  While solid, except as noted, be advised we obtained this from a collection so consider it used.

PRE-OWNED

Cold Steel FL-35DPLT Engage Tanto.  Features a 3 1/2"  plain edge tanto blade of S35VN steel.  

Dual thumb-studs.  Atlas lock. Contoured  Black G-10 handles.  Reversible pocket clip..  Taiwan.  

Knife is in excellent condition.  No signs of use.  Original factory edge.   Original box in good condition. 

NOTE:  While this knife is in excellent condition,  - except as noted - be advised we obtained this from a collection, so please consider it used.

PRE-OWNED

Large Cold Steel Kris Voyager.  Features a 5 1/2" stonewashed Kris blade of AUS 10A stainless.  Textured black Griv-Ex handles.  Dual thumb-studs.  Tri-Ad lock.  Two reversible pocket clips.  6 3/4" closed.  Weight 7.4oz.  Taiwan 

  Knife is in excellent condition.  Shows no signs of use.  Original factory edge.  Original box that is a little squashed but solid. 

NOTE:  While this knife is in excellent condition, be advised we obtained this from a collection, so please consider it used.

PRE-OWNED

Here is a massive well built Cold Steel at a steal.  This Luzon features a 6" black plain edge blade of 8Cr13MoV stainless.  Dark Earth FRN handles over dual black stainless steel liners.  Finger Flipper.  Dual thumb studs.  Liner-lock with manual locking mechanism to keep liner-lock in place during use.  Reversable FRN pocket clip.  7 1/8" closed.

PRC

Knife shows no signs of use or carry.  Original factory edge.  Original box.

NOTE:  While this knife is in excellent condition, be advised we obtained this from a collection, so please consider it used.

PRE-OWNED

Benchmade 860 Bedlam.

Features a 4" satin finished plain edge blade of 154CM stainless steel.  Black layered G-10 handle scales over matte black stainless liners.  Dual thumbstuds. 

 Axis Lock.  Reversable black stainless pocket clip.  Knife is in excellent condition.   No signs of carry or used.  Original factory edge.  Some light storage scuffs on back liner.  Original box and sock.

Made in USA

NOTE:  While this knife is in excellent condition, be advised we obtained this from a collection, so please consider it used.

The USA-made Bel Air is back in black with a stealthy look. Its satisfying smoothness is unmatched thanks to manual KVT ball bearings and DuraLock technology. Confidently handle the blade as the crossbar secures it in place, and when closing, pull back on the handle button to drop the blade shut. Cutting wise, MagnaCut blade steel holds an exceptional edge. The reverse tanto blade stands up to the toughest challenges, and the black PVD coating adds blade protection. Carry the slim profile easily using the reversible deep-carry pocketclip. Black never goes out of style and neither will the Bel Air – Black.

  Made in USA, all-black Bel Air; smooth and EDC-friendly design with black-anodized handle

DuraLock secures the blade open using a solid steel crossbar; pull the ambidextrous lock back to safely close the knife

Premium CPM MagnaCut powdered metallurgy blade steel excels in edge retention, toughness, and corrosion resistance; black PVD coating offers extra blade protection

Opens easily with KVT ball-bearing system and thumb studs; black-oxide locking dowel and tube spacers

Black Cerakote, deep-carry pocketclip is easily reversible for left/right carry; lanyard hole

SPECIFICATIONS:

--Blade Length:  3.1 in. (7.9 cm)

--Blade Material:  CPM MagnaCut

--Hardness:  HRC 62-64

--Blade Finish/Coating:  Black PVD coating

--Blade Thickness:  0.09 in. (2.3 mm)

--Closed Length:  4.2 in. (10.7 cm)

--Handle Material:  6061-T6 aluminum

--Handle Finish/Coating:  Black anodized

--Handle Thickness:  0.44 in. (11.2 mm)

--Overall Length:  7.3 in. (18.5 cm)

--Weight:  2.9 oz. (82 g)

USA

  From cutting open boxes to slicing through envelopes, the KatanaX makes short work of the weekday grind. When it comes to everyday tasks, this manual OTF (out the front) knife from custom knifemaker Darriel Caston of D Rocket Design has everything you need and nothing you don’t. Small and agile, it can slip into any pocket or easily find a home on your desk.

--Superior Performance:  D2 blade steel for excellent edge retention

--Enhanced Protection:  Black finish is durable and ages well

--Strong And Lightweight:  Grivory® handle combines strength with minimal weight

--Easy Opening:  Manual out the front deploys the blade with push of the thumb

--Useful Utility:  Lanyard to easily access and retain the knife

SPECIFICATIONS:

--Blade Length:  2.01"

--Overall Length:  4.85"

--Closed Length:  2.96

--Weight:  0.80 oz

PRC

The M21™ 04G  offers up unsurpassed cutting power featuring deep-bellied spear point blades in the front, and lightweight, insulating, tough G10 handles in the back. In the middle is you, happy, and ready to take on tasks.

  Retired Sgt. Major and legendary custom knifemaker Kit Carson of Vine Grove, KY designed the M21™ series. His knives have been a long-time staple of military forces worldwide and Kit wanted to create a premium knife that was everything you could ask for in a high quality work blade, but at a great price. He succeeded with a heavy-duty knife series that’s tough enough for whatever life throws your way.

--Safe And Secure:  Automated liner safety provides extra layer of lock security

--Fast Opening:  The flipper deploys the blade fast

--Exceptional Grip:  G10 handle provides grip in all conditions

SPECIFICATIONS:

--Blade Steel:  1.4116

--Black finished blade and hardware

--Black G-10 handle scales

--Blade Length:  3.99"

--Overall Length:  9.31"

--Length Closed:  5.34"

--Weight:  6.4 oz

Taiwan

Based on the original design by Jon Graham, a mechanic turned knifemaker, the Razel™ is a powerful pocket fixed-blade knife built to handle the harsh daily conditions of shop life.

  Its squared chisel blade gives it multi-tool qualities, enabling it to excel in a variety of conditions, including push cutting, scraping, and slicing.

--Superior Performance:  D2 blade steel for excellent edge retention

--Multi-Purpose Utility:  Chisel blade useful for push cutting or scraping

--Strong And Visual:  Micarta handle combines strength with visual appeal

--Convenient Carry:  Pocket carry sheath for quick deployment

--Accessory Options:  Lanyard hole for fob

SPECIFICATIONS:

--Blade Length:  2.97"

--Overall Length:  6.75"

--Weight:  4.20 oz

PRC

Koenig Arius Gen 4 Flipper featuring a 3 1/2" burnished blade with polished flats of Bohler M390 steel.  Patterned contoured titanium face and back.  Satin Titanium hardware and spacer.  Blasted titanium clip.  Made in USA.

Gerber Multi-plier 600 DET.  This is a fully functional toolbox that fits in the palm of your handle.  This versatile tool features all stainless steel construction, a range of functional tools and patented pliers that open easily with one hand.  All components lock open with Gerber's patented Saf-T Plus locking system.  Special tools include a blasting cap crimper and a C4 punch.  Black non-reflective finish.

TOOLS:

 --C4 Punch 

--RemGrit(R) GJ-4 Saw with Universal Coupler

--C4 Punch

--Can Opener  

Cross Point Screwdriver  

--File   

--Fine Edge Knife 

--Lanyard Ring

--Large Flat Blade Screwdriver

--Needle Nose Plier With Blasting Cap Crimper

--Ruler

--Wire Crimper

--Wire Cutter

Black nylon belt sheath.

USA