Menu
Ka-Bar Knives
-
![Ka-Bar U.S. Army Fighting...]()
Ka-Bar U.S. Army Fighting...
$96.90Ka-Bar 1219 U.S. Army marked partially serrated fighting knife.
The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials. Tang stamped U.S. ARMY. U.S. Army stamped leather sheath included.
SPECIFICATIONS:--WEIGHT: 0.7 lb--BLADE TYPE: Fixed Blade--BLADE LENGTH: 7 inches--OVERALL LENGTH: 11.875 inches--EDGE ANGLES: 20 Degrees--SHAPE: Clip Point--TANG STAMP: U.S. ARMY--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Stacked Leather--ROCKWELL HARDNESS: 56-58--BUTT CAP/GUARD: 12GA Commercial Grade Carbon Steel--KNIFE MANUFACTURED IN: United States--SHEATH MANUFACTURED IN: Mexico--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 1.188 inches
-
![Ka-Bar 3 Piece Throwing...]()
Ka-Bar 3 Piece Throwing...
$29.90KA-Bar 1121 Three Piece Throwing Knife Set with Pouch.
The KA-BAR Throwing Knife Set features three throwing knives and a polyester storage pouch. The Throwing Knives are made of 3Cr13 steel and are marked with the KA-BAR Skull logo. Stock up on this throwing knife set and limit your time walking back and forth to your target! Please note throwing knives are not sharpened.
--BLADE LENGTH: 4 inches
--OVERALL LENGTH: 9.375 inches
PRC
-
![Becker Brown Micarta®...]()
Becker Brown Micarta®...
$42.97Brown canvas Micarta® handles will fit the KA-BAR Short Becker Knives BK16, BK18, BK18BLK, and BK19. These handles will also fit the following discontinued models: BK15 and BK17. Please note these handles do not come with hardware. Please use your existing KA-BAR Becker hardware. If you have lost it or would like to purchase your own hardware the measurements are: Handle Cap Screws: 8 - 32 x 1/2" Nuts: 8 - 32 Allen Wrench size: 9/64 Made in the USA.
-
![EK Model 5 Bowie]()
EK Model 5 Bowie
$89.97KA-BAR's third introduction into the John Ek Commando Knife Co. product line is the highly anticipated Model 5. This updated version of the occupational fighting knife with hilt is made from 1095 Cro-Van and features a parkerized bowie blade, textured glass-filled nylon handles and traditional X-head fasteners. A US-made Celcon® sheath with retaining strap, self-locking function and multiple tie-down points is also included. Made in the USA. SELECT SPECS: --Weight: 0.70 lb --Steel: 1095 Cro-Van --Measurements: -Blade length 6.875" -Overall length: 12.9375" --Grind: Flat --Edge Angles: 20 Degrees --Handle Material: Glass-Filled Nylon --Blade Shape: Bowie --HRC: 56-58 --Stamp: KA-BAR/Ek Commando Knife Co. --Butt Cap/Guard: 12ga Commercial Grade Steel USA -
![Ka-Bar NAVY Vietnam Commem.]()
Ka-Bar NAVY Vietnam Commem.
$109.90Ka-Bar NAVY Vietnam Commemorative Fighter. Blade features gold color Vietnam War etching and USN tang stamp. US NAVY brown leather belt sheath. Knife is 12" overall with a 7" black epoxy powder coated carbon steel blade with blood groove. Black epoxy powder coated carbon steel guard and butt cap. Stacked leather handle. Knife made in USA -
![War Sword]()
War Sword
$97.25In an ever-changing world, the need for preparedness has never been greater. Without notice the game can change and the rules no longer apply. Questioning your gear at a crucial moment is not an option. Whether setting up camp or securing your perimeter, the Original Zombie® knives are designed to perform under the most rigorous, unexpected and apocalyptic situations. Now Made in the USA!!! Knife comes mounted with toxic green handles. Extra set of black scales and "Acheron" skeleton knife included. Zombie® patch included (mounted on sheath.) 9 5/8" black blade USA -
![Ka Bar TDI Serrated]()
Ka Bar TDI Serrated
$43.97TDI LAW ENFORCEMENT KNIFE KB02-1481 Designed by a Officer for Officers, by John Brenner, Founder of Tactical Defense Institute. Designed to be worn with a duty belt, concealed behind it, A last ditch weapon for Police Officers. -
![KA-BAR Wide Blade Black...]()
KA-BAR Wide Blade Black...
$99.97KA-BAR Wide Blade Black Fighter Features a 8.00 in. clip point partially serrated blade of 1095 carbon steel with black powder coating, and a 4.88 in. black Kraton handle. Comes complete with a leather/Cordura sheath.
-
![Modified Tanto Fixed Blade]()
Modified Tanto Fixed Blade
$89.97Ka-Bar 1266 Modified Tanto Fixed Blade Knife. This fixed blade knife features an 8 inch black finished 1095 Cro-Van plain edge blade. Black Kraton handles. Steel double guard and pommel. Black Injection Molded Nylon sheath. MOLLE compatable. Knife overall length is approx 12 3/4" USA
-
![Ka-Bar Tanto]()
Ka-Bar Tanto
$89.90Ka-Bar Tanto 8 Inch Tanto blade of 1095 Steel. Black epoxy powder coat on blade. Kraton G thermoplastic elastomer handle. 12.88 Inches overall length. Molded Kydex sheath. Combo edge. -
![Ka-Bar ARMY Fighting Knife]()
Ka-Bar ARMY Fighting Knife
$99.97Ka-Bar ARMY Fighting Knife The most famous fixed blade knife in the World - "the KA-BAR" - was designed to serve our troops during World War II and is still doing its job, with honors, more than 50 years later. 1095 carbon steel blade, epoxy powder coated. U.S. ARMY tang stamp. Stacked leather handle Blade length 7", overall length 11 7/8" 0.68 lbs (blade only) Brown leather ARMY embossed sheath included. Knife USA -
![KB/Becker Nessmuk]()
![]()
- Out of Stock
KB/Becker Nessmuk
$114.90Designed by Ethan Becker, the BK19 shares select traits with the highly sought after Becker BK18 Harpoon, such as handle scales, Celcon® sheath, and burnt bronze color. The BK19 stands out with its Nessmuk blade shape, a fan favorite in the bushcraft community. BK16HNDL Micarta® handles will fit the BK19. Manufactured in Olean, NY with raw German 1095 Cro-Van steel, the KA-BAR Like all KA-BAR products, the BK19 comes with a limited lifetime warranty.
SPECIFICATIONS:
--BLADE LENGTH: 4.3125 inches
--BLADE STEEL: 1095 Cro-Van
--BLADE THICKNESS: 0.165 inches
--BLADE TYPE: Fixed Blade
--BLADE WIDTH: 1.45 inches
--COLOR: Brown
--EDGE ANGLE: 20
--GRIND: Flat
--HANDLE MATERIAL: Ultramid
--OVERALL LENGTH: 9.125 inches
--ROCKWELL HARDNESS: 56-58
Knife and sheath made in USA
-
![Becker Skeleton Knife]()
- Out of Stock
-
![Ka-Bar Attachment System]()
![]()
- Out of Stock
Ka-Bar Attachment System
$12.90The KA-BAR Attachment System features two sets of loops, one large and one small, for a total of four. The Attachment System is made from Celcon® and comes with eight (8) slotted truss screws #8-32 x 3/8”, eight (8) posts #8-32 x 3/8”, and eight (8) spacers. The KA-BAR Attachment System is designed to work in a number of configurations, including horizontal carry, and may work with other products outside of the KA-BAR lineup, such as holsters. It is MOLLE-compatible; MOLLE straps and/or cordage are not included.
USA
-
![Ka-Bar U.S.M.C Fighting...]()
- Out of Stock
Ka-Bar U.S.M.C Fighting...
$89.50Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.
The most famous fixed blade knife in the World. The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC. Hard plastic MOLLE compatible sheath included.
SPECIFICATIONS:--WEIGHT: 0.7 lb--BLADE LENGTH: 7 inches--OVERALL LENGTH: 11.875 inches--EDGE ANGLES: 20 Degrees--SHAPE: Clip Point--TANG STAMP: USMC--NSN: 1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Stacked Leather--ROCKWELL HARDNESS: 56-58--BUTT CAP/GUARD: 12GA Commercial Grade Carbon Steel--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 1.188 inches--KNIFE: USA --SHEATH: Taiwan
-
![Ka-Bar USMC Short Leather...]()
- Out of Stock
Ka-Bar USMC Short Leather...
$11.97SHEATH ONLY!
Ka-Bar 1250S USMC Short Leather Sheath
Fits KA-BARS with 5 1/4" blade and double guard. Made in Mexico.
SHEATH ONLY!
