Kershaw

The Kershaw Barricade is a value-priced rescue knife with standout features & standout color. A bulwark against unpreparedness, the Barricade has all the key features needed in an emergency knife all wrapped up in a bright orange see me package. A carbide glassbreaker is built into the butt end. The sculpted glass-filled nylon handle offers a secure grip whether in glass-striking position or when using the blade. If needed to free a trapped victim, the built-in cord cutter will zip through seat belts and cord quickly and easily. The blade steel is 8Cr13MoV, which can take and hold a sharp edge, yet resharpens easily. Kershaws skilled heat treatment brings out the best in this top-value steel. The blade is black-oxide coated to add an extra measure of protection from the elements. A secure liner lock keeps the blade locked safely open during use, then closes easily when your tasks are done. The modified clip-point blade opens one-handed with SpeedSafe assisted opening and the flipper. For convenient carry, it also features a deep-carry pocketclip that enables the knife to ride securely low in your pocket. SELECT SPECS: --Carbide glassbreaker tip, built-in cord/seatbelt cutter --SpeedSafe® assisted opening --Liner lock --Flipper or thumbstud --Single-position (right, tip-down) pocketclip --Steel: 8Cr13MoV, black-oxide coating --Handle: Orange Glass-filled nylon --Blade length: 3.5 in. (8.9 cm) --Closed length: 5 in. (12.7 cm) --Open length: 8.5 in. (21.6 cm) --Weight: 4.5 oz. (128 g) PRC

Kershaw 7010 Highball with D2 Tool Steel Blade. The classy Highball features clean lines and a high-performance blade of D2 steel. This high-carbon tool steel is wear resistant, tough, and offers excellent edge retention. The blade has a two-toned finish: machine stain on the grinds and gray PVD on a recessed groove in the blade upper. This fully manual knife can be opened one-handed using the recessed groove in the handle like you would a thumb stud. But because there is no thumb stud, the Highball retains its streamlined look. The steel handle is contoured for a comfortable grip. A pop of blue comes from the custom trim ring that surrounds the pivot. FEATURES: --Type: Folder - Manual --Blade Style: Drop Point --Blade Edge: Plain --Opening Action: Manual KVT ball bearings --Opens With Nail nick --Lock Type: Frame lock --Pocketclip: Single-position (right, tip-up) --Handle: Color Gray --Hardware: Black-oxide steel pivot nut, gray PVD steel pocketclip, glass-filled nylon backspacer, black-oxide steel screws SPECIFICATIONS: --Blade Length: 2.8 in. (7.1 cm) --Blade Steel: D2 Tool Steel --Blade Finish/Coating: Gray PVD coating with satin grind --Closed Length: 3.8 in. (9.9 cm) --Handle Material: Stainless steel --Handle Finish/Coating: Gray PVD coating --Handle Thickness: 0.43 in. (11 mm) --Overall Length: 6.75 in. (17.1 cm) --Weight: 2.9 oz. (84 g) --Brand: Kershaw --Model Name: Highball --Model Number: 7010 --Item Number: KS7010 Country of Origin: PRC

Where have you seen this profile before? Thats right. The new Kershaw Natrix is based on brother brand Zero Tolerances 0770, which itself was inspired by the award-winning ZT 0777. The design has apparently been the envy of certain other knifemakers. And now were taking it back. Kershaws new Natrix features a drop-point blade of 8Cr13MoV that offers solid performance with good edge-holding and easy resharpening. The stonewashed blade finish looks good and even helps hide use scratches. Accessed with the built-in flipper, SpeedSafe assisted opening makes it easy to open the Natrix one-handed so its always ready when you need it. The handle is lightweight G-10, 3D-machined and chamfered to fit comfortably in the hand. An oversized pivot provides an attention-grabbing detail on the front of the knife, while our patented Sub-Frame Lock secures the blade and provides a dramatic, contrasting line on the back. The Kershaw Sub-Frame Lock is covered under US Patent 69.120.234. The Sub-Frame Lock design also enables us to lighten the weight of the Natrix, so that you get a big, useful blade in a knife that still weighs in at a mere 2.9 ounces. A decorative aluminum backspacer lightens the load even further and adds another embellishment. Finally, a custom-designed deep-carry pocketclip echoes the lines of a special recess machined into the handle to complete this good-looking knife. Now the next time you see this famous knife profile, it will be from a manufacturer that has a right to the design: Kai. SELECT SPECS: --SpeedSafe® assisted opening --Steel Sub-Frame Lock --Flipper --Reversible deep-carry (left/right, tip-up) pocketclip --Steel: 8Cr13MoV, stonewashed finish --Handle: G-10 --Blade length: 3.25 in. (8.3 cm) --Closed length: 4.25 in. (10.8 cm) --Open length: 7.5 in. (19.1 cm) --Weight: 2.9 oz. (82.2 g) PRC

SHIPS UPS ONLY

Kershaw 5150BW Lucha Butterfly Knife with full Black Wash finish. Do you flip? Do you want to flip? Then the Kershaw Lucha is for you. This is a high-quality butterfly knife thats made in the USA. Next level materials include a 14C28N stainless steel blade and all-steel handle, both with a durable and forgiving Black Wash finish. Next level performance comes from Kershaws meticulous design. For instance, the blade tapers so that the top has more weight to pendulum around smoothly. The Lucha features dual KVT ball-bearing pivots for extra-easy operation. The handle has a rounded bevel so it rolls effortlessly in the hand. Even the latch is rounded so it never catches as you flip. The latch also features a positive stop so it never contacts the blade. The full-sized Lucha was designed with feedback from real flippers. This light, fast butterfly knife will jump, fly, and spin in your hands. FEATURES: --Style: Butterfly Knife --Blade Style: Drop Point --Blade Edge: Plain --Opening Action: Manual dual KVT ball bearings --Lock Type: Latch - non-spring loaded --Pocketclip: None --Handle Color: Black Wash --Hardware: Black-oxide steel pivots, black anodized aluminum tube spacer, black-oxide steel screws. SPECIFICATIONS: --Blade Length: 4.6 in. (11.7 cm) --Blade Steel: Sandvik 14C28N --Blade Finish/Coating: Black Wash --Blade Thickness: 0.156 in. (4 mm) --Closed Length: 5.8 in. (15 cm) --Handle Material: Stainless steel --Handle Finish/Coating: Black Wash --Handle Thickness: 0.43 in. (11 mm) --Overall Length: 10.25 in. (26 cm) --Weight: 5.9 oz. (168 g) --Brand: Kershaw --Model Name: Lucha --Model Number: 5150BW --Item Number: KS5150BW Country of Origin: USA