KNIFE BRANDS

Spyderco C101GP2 Manix 2 This lightweight Manix 2 features a textured Black G-10 handle CPM S30V plain edge blade. Spyderco Ball Bearing lock. Blade length is 3 5/16". 2.85 ounces overall weight. Golden CO USA Earth

This limited-edition Sprint Run™ expression of the Endela® Lightweight showcases Carpenter® Technology’s Micro-Melt PD#1, an air-hardening, cold-work die steel specially formulated to offer both superior wear resistance and toughness. Its advanced alloy composition is further enhanced by the CarTech® Micro-Melt powder metal process, which ensures an ultra-fine, extremely homogeneous grain structure. Functionally equivalent to CPM® CRU-WEAR®, this high-performance steel is the heart of this knife’s full-flat-ground PlainEdge™ blade. To make this elite Endela Lightweight even more distinctive, its blade is cloaked in a non-reflective titanium carbonitride (TiCN) coating and its fiberglass-reinforced-nylon (FRN) handle is injection molded in a deep burgundy color. Consistent with this stunning black-and-burgundy theme, its four-position pocket clip, lock bar, and handle hardware also sport durable black coatings.

SPECIFICATIONS:

--Overall Length:  8.10" (206mm)

--Blade Length:  3.41" (87mm)

--Steel:  Micro-Melt® PD#1

--Closed Length:  4.69" (119mm)

--Edge Length:  2.99" (76mm)

--Weight:  3.2oz (91g)

--Blade Thickness:  0.118" {3.0mm) ---Handle:  Burgundy FRN

--Clip Position:  AmbiTip 

--Carry Position:  4-position

--Lock TypeBack Lock

--GrindFull-Flat

Seki City Japan

NOTE:  This blade steel is high carbon - not stainless - keep clean, dry and lightly oiled.  Rust and corrosion are possible as with any high carbon steel blade.

The Spyderco Counter Puppy is a high quality small kitchen paring knife.  It would also serve well as a steak knife.  The Counter Puppy may very well become your go to knife in the kitchen.

  7" (17.78cm) overall. 3.5" (8.89cm) satin finish 7Cr17MoV stainless blade. Blue plastic handle. Novel design allows the knife to stand upright on a counter or tabletop.  Dishwasher safe.

PRC

Since its introduction in 2011, Michael Janichs Yojimbo 2 design has earned a respected place in Spydercos product line and legions of devoted followers worldwide. The YoJumbo builds on that success, scaling the design up by over 20 percent and refining its ergonomics to accommodate a wider range of hand sizes. Its formidable four-inch (102mm) Wharncliffe blade is hollow ground for superior edge geometry and features a fully accessible Trademark Round Hole for swift, ambidextrous, one-handed opening. The handles open-backed construction and nested, skeletonized stainless steel liners keep weight to a minimum, while its coarse-textured G-10 scales promote a positive, non-slip grip. A high-strength Compression Lock and four-position pocket clip complete the package, making the YoJumbo a truly formidable cutting tool optimized for personal-defense carry. Specs: Overall Length: 9.29" Blade Length: 3.98" Blade Thickness: 0.145" Blade Steel: Satin CPM-M4 Blade Grind: Hollow Lock Type: Compression Opener: Spyderco Round Hole Weight: 5.3 oz Pocket Clip: 4 position Handle: Jade G-10 USA

The SpyMyto™ is a truly unique folding knife that was inspired by the lionSTEEL® Myto™ and is produced by lionSTEEL exclusively for Spyderco. Its hollow-ground, drop-point blade is crafted from M398—an enhanced version of Böhler-Uddeholm’s M390 capable of achieving extremely high hardness and wear resistance. In addition to a fully accessible Trademark Round Hole, the blade features a removable flipper opener, ball bearing pivot washers, and a beautifully radiused spine. The SpyMyto’s handle consists of a linerless green Micarta scale on one side and a solid titanium scale on the other. The latter forms the foundation of the knife’s stout Reeve Integral Lock (R.I.L.) mechanism, which includes a hardened steel interface/overtravel stop. Both scales have painstakingly machined textured chamfers and are joined by a carbon fiber backspacer. A reversible deep-pocket clip mounts to the butt end of the handle to provide left or right-side tip-up carry. This stunning knife is being released as a Flash Batch—a distinctive, one-of-a-kind expression of a model that has not been previously released. Every knife will be individually serialized with discreetly placed laser engraving.  Limited production of 2000.

SPECS:

--Overall Length:  7.77" 

--Blade Length:  3.32" 

--Steel:  Bohler M398

--Closed Length:    4.45" 

--Weight:  3.6oz

--Blade Thickness:  0.157" 

--Clip Position:  Ambi

--Tip Carry Position:  Tip-Up

--Lock:  R.I.L. 

--Blade Grind:  Hollow

Italy

Spyderco C101MPCW2 Manix 2 This Manix 2 features a sanded but not polished brown canvas micarta handle.  Flat ground plain edge blade of premium CPM Cru-Wear high carbon steel.   Spyderco Ball Bearing lock. Blade length is 3 5/16". 4.9 ounces overall weight. Golden CO USA Earth

NOTE:  Cru-Wear is a high carbon steel and not a stainless steel.  Keep blade clean, dry and lightly oiled to help preserve the finish.

The smaller - more compact Para 3 features a full flat grind plain edge satin finished 3" blade of CPM CRUWEAR steel. Brown unpolished Canvas Micarta scales over stainless liners. Compression lock. Drilled and tapped on all four corners for tip-up, tip-down left or right side carry. 4 1/4" closed. USA

NOTE:  CRUWEAR is not a stainless steel.  While considered by many to be a superior pocket knife steel, it will stain and corrode.  Keep blade clean, dry and lightly oiled to help preserve the finish.

Originally introduced in 1992, the Catcherman was a folding fillet knife specifically designed to meet the needs of discriminating fishermen. One of our last models to feature an integral molded pocket clip, it also became a cult classic among serious Spyderco collectors. This limited-edition Sprint Run resurrects this unique design in a form that is distinctly different from all its predecessors. For the first time, its thin blade is full-flat ground and showcases ultra-corrosion-resistant LC200N steel. The partially serrated CombinationEdge™ blade is paired with a one-piece fiberglass-reinforced-nylon (FRN) handle injection molded in the signature bright green of our LC200N lightweight models. It faithfully includes the original Volcano Grip™ texture pattern on one side and an integral pocket clip on the other to provide right-side, tip-up carry.

SPECIFICATIONS:

Overall Length:  10.43" 

--Blade Length:  4.64" 

--Steel:  LC200N

--Closed Length:  5.92" 

--Edge Length:  4.35" 

--Weight:  2.8oz 

--Blade Thickness:  0.07"  

--Handle:  Green FRN

--Clip Position:  Right Tip 

--Carry Position:  Tip-Up

--Lock Type:  Back Lock

--Grind:  Full-Flat

Seki-City

This tour-de-force expression of the Para Military 2 showcases a full-flat-ground blade crafted from CPM MagnaCut—a state-of-the-art particle metallurgy steel that offers an exceptional balance of edge retention, toughness, and superior corrosion resistance. Cloaked in a non-reflective Diamond-Like Carbon (DLC) coating, the PlainEdge blade is housed in a handle featuring peel-ply-textured black G-10 scales machined with the signature Caribbean Bi-Directional Texture pattern of Spyderco’s US-made Salt Series knives. To complement its blade steel and finish, the knife’s nested stainless steel liners, four-position pocket clip, and all other hardware are also made from ultra- corrosion-resistant materials and black coated.

SPECIFICATIONS:

--Overall Length:  8.26" 

--Blade Length:  3.45" 

-Steel:  CPM MagnaCut - Black DLC 

--Closed Length:  4.82" 

--Edge Length:  3.05" 

--Weight:  3.9oz 

--Blade Thickness:  0.145" 

--Handle:  Black G-10

--Clip Position:  Ambi - drilled and tapped on all four corners for left or right tip up or tip down carry.  

--Lock Type:  Compression

--Grind:  Full-Flat

--Hardware:  All black

USA