Filter By
KNIFE BRANDS
-
Tenacious Black FRN PE
$56.25Spyderco C122PBK Tenacious Plain Edge Linerlock with Black FRN Handle Scales. --Black Fiberglass Reinforced Nylon (FRN) Handles.. --Walker Linerlock with jimped liner. --Full skeletonized steel liners. --4-way pocket clip....tip-up, tip-down, left or right. --Enlarged opening hole. --Spine jimping. --Flat grind. --Closed: 4 7/16" --Overall: 7 3/4" --Blade: 3 3/8" --8Cr13MoV stainless steel blade. --3.8 oz. PRC. -
Tenacious Black FRN BLK PE
$60.00Spyderco C122PBBK Tenacious Black Plain Edge Linerlock with Black FRN Handle Scales. --Black Fiberglass Reinforced Nylon (FRN) Handles.. --Walker Linerlock with jimped liner. --Full skeletonized steel liners. --4-way pocket clip....tip-up, tip-down, left or right. --All Black hardware --Enlarged opening hole. --Spine jimping. --Flat grind. --Closed: 4 7/16" --Overall: 7 3/4" --Blade: 3 3/8" --Black 8Cr13MoV stainless steel blade. --3.8 oz. PRC.
-
Tenacious PS
$64.50Spyderco C122GPS Tenacious Tenacious Partially Serrated liner lock. Black ergonomically milled G-10 handle. Walker Linerlock with jimped liner. Full skeletonized steel liners. 4-way pocket clip....tip-up, tip-down, left or right. Enlarged opening hole. Spine jimping. Flat grind. Closed: 4 7/16" Overall: 7 3/4" Blade: 3 3/8" 8Cr13MoV stainless steel blade. 4 oz. (115gm) Imported. -
Tenacious PS Black
$69.00Spyderco C122GBBKSP Tenacious Tenacious Partially Serrated with Black Blade and hardware. Black ergonomically milled G-10 handle. Walker Linerlock with jimped liner. Full skeletonized steel liners. 4-way pocket clip....tip-up, tip-down, left or right. Enlarged opening hole. Spine jimping. Flat grind. Closed: 4 7/16" Overall: 7 3/4" Blade: 3 3/8" Black finished 8Cr13MoV stainless steel blade. Blackened screws, liners and pocketclip. 4 oz. (115gm) PRC -
Ambitious Black FRN Black...
$47.25Spyderco C148PBBK Lightweight
This Ambitious features a 2 1/4" black plain edge blade of 8Cr13MoV stainless steel. Black FRN handle scales over skeletonized black stainless steel liners. Linerlock design. Black Stainless Steel pocket clip - handles are drilled and tapped on all four corners for right or left side tip-up or tip-down carry. 3 1/2" closed.
PRC
-
UpTern PE
$51.00Spyderco C261P UpTern. The UpTern features a 2 3/4" full flat ground plain edge blade of 8Cr13MoV Stainless Steel. Brushed Stainless Steel Handles. Pocket clip. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry. Mid-lockback design. 3 3/4" closed. PRC
-
UpTern PS
$51.00Spyderco C261PS UpTern Partially Serrated. The UpTern features a 2 3/4" full flat ground partially serrated blade of 8Cr13MoV Stainless Steel. Brushed Stainless Steel Handles. Pocket clip. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry. Mid-lockback design. 3 3/4" closed. PRC
-
Dune
$29.97As a backup knife, an easy-to-access utility blade, or just an unobtrusive, easy-to-carry EDC, neck knives are becoming a top choice for many knife users. Not only does ours look awesome, at 3.8 inches, the Dunes blade is longer than other neck knives, providing more usable slicing area. It also has a tanto tip ideal for piercingas well as an overall sword-like blade design that gives it an unmistakable style. For solid reliability, the Dune is a full-tang knife and has textured, glass-filled nylon scales that make for a lightweight and durable knife with a secure grip. Naturally, the Dune includes its own molded sheath that snaps the knife securely into position, yet releases quickly when needed. The Kershaw logo K molded into the sheath lets knife users know theyre carrying the best with Kershaw. FEATURES and SPECS: Molded sheath, lanyard -- Full tang construction -- Steel: 8Cr13MoV, black-oxide finish -- Handle: Injection molded -- Blade length: 3.8 in. (9.7 cm) -- Overall length: 7.7 in. (19.8 cm) -- Weight: 2.5 oz. (72 g) PRC -
Large Sebenza 31 Drop Point...
$750.00Chris Reeve Large Sebenza 31 Plain Drop Point - L31-1000 Sebenza means "work" in Zulu and these knives are intended to do just that. Built with handcrafted care at a production level, the Sebenza 31 has earned a worldwide reputation for rock solid performance and a "bank vault" feel. Offered with a CPM S45VN hollow-ground blade at a 57-58 RC, the Sebenza 31's blade will retain a sharp edge with easy maintenance. The Sebenza 31 uses the Reeve Integral Lock, which is a lock bar integral to the back handle. Pre-bending at the end of the slot causes the spring to move to the base of the blade, thereby locking the blade open. FEATURES: --Reeve Integral Lock with Ceramic Ball Interface --CPM S45VN Polished Drop Point Blade --6AL4V Titanium Handles --Off-set Clip Design SPECIFICATIONS: --Blade Length: 3.61" --Blade Thickness: 0.12" --Handle Length: 4.79" --Overall Length: 8.40" --Weight: 4.7 ounces Country of Origin: USA
-
Meatcrafter S45VN
$333.00Turn your overland or hunting campsite into an outdoor kitchen with the new 15500-3 Meatcrafter®. This hybrid hunting fixed blade has a fine, smooth edge to trim, debone, or slice your preferred cuts of meat thanks to the application of Benchmade’s SelectEdge® technology on the CPM-S45VN steel. The Boltaron sheath, OD Green G10 handle, and orange cerakote ring make it a perfect tool for preparing food fireside, butchering, or boning out animals
SPECIFICATIONS:--BLADE LENGTH - 6.08" | 15.44cm--BLADE THICKNESS - 0.09" | 2.29mm--OPEN - 11.06" | 28.09cm--SHEATH WEIGHT - 2.15oz | 60.95g--WEIGHT - 4.52oz | 128.14g--HANDLE THICKNESS - 0.55" | 13.97mm
USA
-
Spyderthrower Small
$100.80Designed by Canadian custom knifemaker Harald Moeller in collaboration with Spyderco, this three knife set is right on target. Each of the three knives in the large set are 9" long and 0.217" thick. The two tone blade is made of 8Cr13MoV stainless steel. Comes with a triple tiered leather sheath. PRC -
Tenacious OD FRN Blk Blade PS
$49.00Spyderco C122PSODBK Tenacious Linerlock with Olive Drab FRN Handle Scales and Black Partially Serrated Blade --Olive Drab Fiberglass Reinforced Nylon (FRN) Handles.. --Walker Linerlock with jimped liner. --Full skeletonized steel liners. --4-way pocket clip....tip-up, tip-down, left or right. --Enlarged opening hole. --Thumb jimping. --Flat grind. --Black Blade --Black Hardware --Partially Serrated --Closed: 4 7/16" --Overall: 7 3/4" --Blade: 3 3/8" --8Cr13MoV stainless steel blade. --3.8 oz. PRC. -
Tenacious OD FRN Blk Blade PE
$49.00Spyderco C122PODBK Tenacious Linerlock with Olive Drab FRN Handle Scales and Black Plain Edge Blade --Olive Drab Fiberglass Reinforced Nylon (FRN) Handles.. --Walker Linerlock with jimped liner. --Full skeletonized steel liners. --4-way pocket clip....tip-up, tip-down, left or right. --Enlarged opening hole. --Thumb jimping. --Flat grind. --Black Blade --Black Hardware --Plain Edge --Closed: 4 7/16" --Overall: 7 3/4" --Blade: 3 3/8" --8Cr13MoV stainless steel blade. --3.8 oz. PRC. -
Tenacious PE Black
$69.00Spyderco C122GBBKP Tenacious Tenacious Plain Edge with Black Blade and hardware. Black ergonomically milled G-10 handle. Walker Linerlock with jimped liner. Full skeletonized steel liners. 4-way pocket clip....tip-up, tip-down, left or right. Enlarged opening hole. Spine jimping. Flat grind. Closed: 4 7/16" Overall: 7 3/4" Blade: 3 3/8" Black finished 8Cr13MoV stainless steel blade. Blackened screws, liners and pocketclip. 4 oz. (115gm) PRC -
Large Sebenza 31 Drop Point
$450.00Chris Reeve Large Sebenza 31 Plain Drop Point - L31-1000 Sebenza means "work" in Zulu and these knives are intended to do just that. Built with handcrafted care at a production level, the Sebenza 31 has earned a worldwide reputation for rock solid performance and a "bank vault" feel. Offered with a CPM S45VN hollow-ground blade at a 59-60 RC, the Sebenza 31's blade will retain a sharp edge with easy maintenance. The Sebenza 31 uses the Reeve Integral Lock, which is a lock bar integral to the back handle. Pre-bending at the end of the slot causes the spring to move to the base of the blade, thereby locking the blade open. FEATURES: --Reeve Integral Lock with Ceramic Ball Interface --CPM S35VN Stonewashed Drop Point Blade --6AL4V Titanium Handles --Off-set Clip Design SPECIFICATIONS: --Blade Length: 3.61" --Blade Thickness: 0.12" --Handle Length: 4.79" --Overall Length: 8.40" --Weight: 4.7 ounces Country of Origin: USA
-
Grunt Fixed Blade Skinner
$43.99The Grunt fixed blade is a strong and sturdy skinner. It is a great carry size, but big enough for skinning due to its shape and grip. It is a full tang construction of 8CR13MOV stainless steel with a hollow grind and satin finish. The handle is a contoured black G-10 for durability. This fixed blade comes with a genuine leather black snap-close sheath with basket weave. SPECIFICATIONS: --Overall: 6-1/2" --Blade: 3" --Contoured black G-10 textured handle --8CR13MOV stainless steel blade --Full tang construction --Genuine black leather sheath PRC