KNIFE BRANDS

Since its introduction in 2011, Michael Janichs Yojimbo 2 design has earned a respected place in Spydercos product line and legions of devoted followers worldwide. The YoJumbo builds on that success, scaling the design up by over 20 percent and refining its ergonomics to accommodate a wider range of hand sizes. Its formidable four-inch (102mm) Wharncliffe blade is hollow ground for superior edge geometry and features a fully accessible Trademark Round Hole for swift, ambidextrous, one-handed opening. The handles open-backed construction and nested, skeletonized stainless steel liners keep weight to a minimum, while its coarse-textured G-10 scales promote a positive, non-slip grip. A high-strength Compression Lock and four-position pocket clip complete the package, making the YoJumbo a truly formidable cutting tool optimized for personal-defense carry. Specs: Overall Length: 9.29" Blade Length: 3.98" Blade Thickness: 0.145" Blade Steel: Satin CPM-M4 Blade Grind: Hollow Lock Type: Compression Opener: Spyderco Round Hole Weight: 5.3 oz Pocket Clip: 4 position Handle: Jade G-10 USA

The SpyMyto™ is a truly unique folding knife that was inspired by the lionSTEEL® Myto™ and is produced by lionSTEEL exclusively for Spyderco. Its hollow-ground, drop-point blade is crafted from M398—an enhanced version of Böhler-Uddeholm’s M390 capable of achieving extremely high hardness and wear resistance. In addition to a fully accessible Trademark Round Hole, the blade features a removable flipper opener, ball bearing pivot washers, and a beautifully radiused spine. The SpyMyto’s handle consists of a linerless green Micarta scale on one side and a solid titanium scale on the other. The latter forms the foundation of the knife’s stout Reeve Integral Lock (R.I.L.) mechanism, which includes a hardened steel interface/overtravel stop. Both scales have painstakingly machined textured chamfers and are joined by a carbon fiber backspacer. A reversible deep-pocket clip mounts to the butt end of the handle to provide left or right-side tip-up carry. This stunning knife is being released as a Flash Batch—a distinctive, one-of-a-kind expression of a model that has not been previously released. Every knife will be individually serialized with discreetly placed laser engraving.  Limited production of 2000.

SPECS:

--Overall Length:  7.77" 

--Blade Length:  3.32" 

--Steel:  Bohler M398

--Closed Length:    4.45" 

--Weight:  3.6oz

--Blade Thickness:  0.157" 

--Clip Position:  Ambi

--Tip Carry Position:  Tip-Up

--Lock:  R.I.L. 

--Blade Grind:  Hollow

Italy

Spyderco C223PYL Para 3 Salt.  Features a 2 7/8" full flat ground satin finished plain edge blade of CPM-MagnaCut stainless steel.  Lightweight Yellow FRN handles.  Compression lock with all black hardware.  Pocket clip reversable for right or left side tip-up carry.  4 1/4" closed.

USA

The smaller - more compact Para 3 features a full flat grind plain edge satin finished 3" blade of CPM CRUWEAR steel. Brown unpolished Canvas Micarta scales over stainless liners. Compression lock. Drilled and tapped on all four corners for tip-up, tip-down left or right side carry. 4 1/4" closed. USA

NOTE:  CRUWEAR is not a stainless steel.  While considered by many to be a superior pocket knife steel, it will stain and corrode.  Keep blade clean, dry and lightly oiled to help preserve the finish.

There is nothing like the feel of a Case knife in your hand. Durable, strong and beautifully designed, our hand-crafted Case knives are in a class of their own, which is one reason why they've been passed down from generation to generation, and sought after by collectors from all over the world. For an authentic, American-made work of art, nothing compares to a Case pocket knife, or hunting knife. W.R. Case & Sons Cutlery Co., hand-crafted knives since 1889. Case XX 2024 Father's Day Russlock - Limited Edition.  Embellished Smooth Chestnut Bone handle.   One hand opening locking stainless steel clip blade.  Embellished Metal presentation tin.  4 1/4" closed, 2.7 oz. USA

Originally introduced in 1992, the Catcherman was a folding fillet knife specifically designed to meet the needs of discriminating fishermen. One of our last models to feature an integral molded pocket clip, it also became a cult classic among serious Spyderco collectors. This limited-edition Sprint Run resurrects this unique design in a form that is distinctly different from all its predecessors. For the first time, its thin blade is full-flat ground and showcases ultra-corrosion-resistant LC200N steel. The partially serrated CombinationEdge™ blade is paired with a one-piece fiberglass-reinforced-nylon (FRN) handle injection molded in the signature bright green of our LC200N lightweight models. It faithfully includes the original Volcano Grip™ texture pattern on one side and an integral pocket clip on the other to provide right-side, tip-up carry.

SPECIFICATIONS:

Overall Length:  10.43" 

--Blade Length:  4.64" 

--Steel:  LC200N

--Closed Length:  5.92" 

--Edge Length:  4.35" 

--Weight:  2.8oz 

--Blade Thickness:  0.07"  

--Handle:  Green FRN

--Clip Position:  Right Tip 

--Carry Position:  Tip-Up

--Lock Type:  Back Lock

--Grind:  Full-Flat

Seki-City

Case XX single blade Longhouse with smooth black burlap micarta handle scales LONGHOUSE CPM20-CV.  Premium CPM-20CV clip point blade.  Liner-lock.   4" closed.  USA

FIRST PRODUCTION RUN - 1 OF 250

LIMITED AVAILABILITY

Case XX single blade Medium Toothpick with Smooth Seafoam Green G-10 handles.  Stainless Clip blade.  Clip blade embellished "First Production Run.  Ichthus inlay shield.  

4 1/4" closed.

USA

LIMITED AVAILABILITY - FIRST PRODUCTION RUN

Case XX single blade Longhouse with smooth OD Green burlap micarta handle scales LONGHOUSE CPM20-CV.  Premium CPM-20CV clip point blade.  Liner-lock.  Blade marked "First Production Run.  4" closed.  USA

Case XX single blade full size CopperLock with Dark Red Jig Bone handles - 61549L CS.  Carbon Steel Locking Clip blade.  4 1/4" closed.

USA

NOTE:  This knife has high carbon steel blades.  This steel, while considered by many to be a superior pocket knife steel will rust and tarnish.  Keep clean, dry and lightly oiled to help preserve the blade finish.

FIRST PRODUCTION RUN - LIMITED AVAILABILITY

Case XX single blade Highbanks slip-joint with Black Burlap Micarta handles.  Anodized aluminum frame.  Pocket clip.  Premium CPM-20-CV blade with FIRST PRODUCTION RUN on blade.

4" closed.

USA

FIRST PRODUCTION RUN - LIMITED AVAILABILITY

Case XX single blade Highbanks slip-joint with smooth Rosewood handles.  Anodized aluminum frame.  Pocket clip.  Premium CPM-20-CV blade with FIRST PRODUCTION RUN on blade.

4" closed.

USA

FIRST PRODUCTION RUN - LIMITED AVAILABILITY

Case XX single blade Longhouse with smooth Rosewood handle scales LONGHOUSE CPM20-CV.  Premium CPM-20CV clip point blade.  Liner-lock.  Blade marked "First Production Run.  4" closed.  USA

LIMITED AVAILABILITY - FIRST PRODUCTION RUN

Case XX single blade Longhouse with smooth black burlap micarta handle scales LONGHOUSE CPM20-CV.  Premium CPM-20CV clip point blade.  Liner-lock.  Blade marked "First Production Run.  4" closed.  USA

ON ORDER - CLICK THE NOTIFY ME BUTTON TO GET AN EMAIL WHEN AVAILABLE.  WE SHOULD GET MULTIPLE SHIPMENTS OF THIS DESIRABLE SPRINT RUN 

This unique, limited-edition expression of the Military 2 proudly showcases Crucible CPM S90V blade steel and stunning carbon fiber handle scales. CPM S90V’s advanced alloy composition promotes the formation of hard vanadium carbides instead of chromium carbides, enhancing the steel’s wear resistance while leaving more free chromium available for superior corrosion resistance. The full-flat-ground PlainEdge blade of this elite knife takes full advantage of these qualities to deliver unparalleled cutting performance. It is housed in a handle featuring solid carbon fiber scales with a subtle peel-ply texture for a secure grip. Stainless steel liners nested within the scales provide superior structural strength and form the foundation of the knife’s high-strength Compression Lock mechanism. They also anchor its four-position pocket clip, which supports ambidextrous tip-up or tip-down carry.

SPECIFICATIONS:

--Overall Length:  9.51" (242mm)

--Blade Length:  4.00" (102mm)

--Steel:  CPM S90V(420V)

--Closed Length:  5.51" (140mm)

--Edge Length:  3.65" (93mm)

--Weight:  4.4oz (124g)

--Blade Thickness:  0.145"  

--Handle:  Carbon Fiber

--Clip Position:  AmbiTip 

--Carry Position:  4-positionL

-Lock Type:  Compression

--Grind:  Full-Flat

USA

Spyderco C101PYL2 Manix 2. A recipe for folding knife success: Start with hard-use rated lock. Add a blade made of Premium Magnacut steel. Manufacture it in Golden, Colorado using precise tolerances then add a healthy dash of American innovation. These ingredients are the Manix 2; a concoction of solo features and when combined, make one of the strongest knives from Spyderco to date. Patented by Spyderco, the Manix 2 has a Ball Bearing Lock. It's a hardened free-floating ball bearing contained in a custom hi-tech polymer cage. The round ball bearing allows the lock to self adjust across a large surface, smoothly and consistently locking-up with solid confidence. Evolving over time, the Ball Bearing Lock's strength withstands hard work with a secure, versatile and comfortable grip. Ergonomics are peerless in this design. The blade is Premium Magnacut steel and flat-ground with aggressive thumb serrations (jimping) above a super sized 14mm Spyderco Round Hole. The jimping doesn't stop there. With full steel liners, the scales have jimping that extends beyond the Yellow FRN handle scales scalloping areas of the handle's perimeter. This one is not slipping out of your hand and works well with gloves on. The liners pull double purpose by adding rigidly and lightweight strength to the handle. A three-screw clip is left/right-hand carry, positioned for comfort and deep pocket carry. The knife also has a large lanyard pipe to protect various types of cords or thongs. Blade length: ~ 3 1/3" Closed length: ~4 5/8"  USA