List of products by brand Fallkniven

Fallkniven F1 Pilot Survival Fixed Blade Knife with Satin 3G Laminate Blade and Zytel Sheath. The Model F1 has been the the official survival knife for Swedish Pilots since 1995. Built stong with purpose in mind this straight forward designed fixed blade is capable of any task asked of it. SELECT SPECS: --Blade Steel: Laminate 3G Powder Steel --Blade Shape: Drop Point --Edge: Plain Edge --Blade Finish: Satin --Full Protruding Tang Construction --Handle: Black Thermorun E --Lanyard Hole: Yes --Blade Length: 3 7/8" --Blade Thickness: 0.18" --Overall Length: 8 1/2" --Handle Length: 4 1/2" --Weight: 6 oz --Black Zytel belt sheath included. Country of Origin: Japan FN53

Fallkniven P Concept Folding Linerlock. The Model PC is a lightweight, modern folding knife with many superb properties. The blade is made using laminated Cobalt Special Steel which guarantees edge retention beyond the ordinary! The blade is locked in place using a liner lock which is well known to be one of the safest and strongest locks in the world. The Black fiberglass reinforced Grilon handle is internally lined with stainless steel providing extreme strength. With a weight of only 66 grams (2.33 oz) it is comfortable to carry in your pocket and, should the knife get dirty, it is easy to clean with a little soap and hot water. The pivot is fixed with greaseless Teflon bearings and can be tightened or loosened with a Torx T10 screwdriver. Nail notches on both sides of the blade allow for comfortable use by right and left handers. The Model PC is a development of the original Model P hence the name. If you are looking for an everyday carry (EDC) knife that uses high end materials at the cutting edge of knife making technology, then the PC is the knife for you. SELECT SPECS: --Total length: 174 mm (6.85") --Length folded: 100 mm (3,94") --Blade length: 73 mm (2.87") --Blade thickness: 3 mm (0.12") --Steel: Lam.inated CoS Cobalt Steel --Hardness: 60 HRC --Handle material: Black Grilon --Locking: Liner Lock. Country of Origin: Sweden

Fallkniven TF Tiaga Forester 2 Fixed Blade.

Features a 4 3/4" blade of laminate cobalt steel.  Black thermorun handle over a broad tang.  Black Zytel belt sheath.  9 1/4" overall.

Sweden

Fallkniven TH Tiaga Hunter Fixed Blade.

Features a 3 1/2" convex grind blade of laminate cobalt steel.  Black thermorun handle over a broad tang.  Black Zytel belt sheath.  7 1/2" overall.

Sweden

Fallkniven P Concept Folding Linerlock. The Model PC is a lightweight, modern folding knife with many superb properties. The blade is made using laminated Cobalt Special Steel which guarantees edge retention beyond the ordinary! The blade is locked in place using a liner lock which is well known to be one of the safest and strongest locks in the world. The Black fiberglass reinforced Grilon handle is internally lined with stainless steel and highlighted with gold tone hardware providing extreme strength. With a weight of only 66 grams (2.33 oz) it is comfortable to carry in your pocket and, should the knife get dirty, it is easy to clean with a little soap and hot water. The pivot is fixed with greaseless Teflon bearings and can be tightened or loosened with a Torx T10 screwdriver. Nail notches on both sides of the blade allow for comfortable use by right and left handers. The Model PC is a development of the original Model P hence the name. If you are looking for an everyday carry (EDC) knife that uses high end materials at the cutting edge of knife making technology, then the PC is the knife for you. SELECT SPECS: --Total length: 174 mm (6.85") --Length folded: 100 mm (3,94") --Blade length: 73 mm (2.87") --Blade thickness: 3 mm (0.12") --Steel: Laminated CoS Cobalt Steel --Hardness: 60 HRC --Handle material: Black Grilon --Locking: Liner Lock. Country of Origin:  Sweden

FNU2CYELMAX 3 3/8" closed. 2 1/2" ELMAX drop point blade. Double nail-nicks.  Cygnus blade etch.  Black Grilon handles with lanyard hole. Lock-back. Sweden

FNU2ELMAX 3 3/8" closed. 2 1/2" ELMAX drop point blade. Double nail-nicks. Black Zytel handles with lanyard hole. Lock-back. Sweden

 The X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool.

  The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort.

SPECIFICATIONS:

--Steel:  Laminate CoS

--Hardness (HRC):  60

--Edge:  Convex

--Tang:  Full tang

--Handle material:  Black Heavily textured Thermorun

--Sheath:  Black Zytel

--Blade length:  5 3/16"

--Blade thickness:  1/4"

--Total length:  9 3/4"

Sweden

The Fallkniven F1 is the official survival knife Swedish Air Force pilots since 1995. A new world standard was set with the F1 through attention to important details including technical design, ergonomics and economy. The Fallkniven F1 surpasses international standards for strength, personal security capabilities, and value for money.

  The Fallkniven F1 represents a new philosophy with respect to knives for survival use. The F1 successfully combines the experience of generations of knife manufacturing with the most modern technology and forging.

  The well thought-out design and incredibly tough laminated steel are only two of the many details making the handy-sized Fallkniven F1 a knife you can always you can rely on even with your life. The F1 is well proportioned and tremendously versatile. The safe, comfortable grip along with its hard and tough laminated steel blade makes the F1 knife incredibly useful for all types of daily work and demanding tasks.

SPECIFICATIONS:

--Steel:  Laminated CoS

--Hardness (HRC):  60

--Edge:  Convex

--Tang:  Protruding broad tang

--Handle material:  Black Thermorun

--Sheath:  Black Leather

--Blade length:  4"

--Total length:  8 3/8"

--Blade finish:  Satin

--Blade grind:  Convex - Flat

The KK knife (the Kolt Knife) is a traditional designed knife where the clean lines dominate the blade, the handle and the sheath. The history of the design goes back to the times when the knife was a common tool in your daily life, no matter if you were a hunter or a farmer. The knife is not intended for waist belt carry. Instead, it is intended for parts of the body where access to the knife is at best, like in your pocket, or around your neck. By offering a safe, comfortable handle, and a very strong blade with an extremely sharp edge, the non-aggressive design provides a knife which should fit any hand, and any task. The high quality leather pouch sheath with dangler  protects the edge and stores the knife safely when off duty. Steel: Satin finish laminate 402J2/CoS steel, HRC 60. Edge: The edge is convex, pretty thin so called ICE edge, improved convex edge. Blade: Wide, hidden tang construction, lanyard hole of standard size. Handle: Thermorun handle with checkered sides. Crossguard: Stainless crossguard, securely fastened to the blade tang. Sheath: Black Leather pouch sheath with dangler.  SELECT SPECS: --Total length: 185 mm (7.3") --Blade length: 85 mm (3.35") --Blade thickness: 3.85 mm (0.15") --Tang: Broad, Hidden --Weight (knife): 84 g --Steel: Laminated CoS Cobalt --Blade hardness: 60 HRC --Handle: Thermorun E --Sheath: Leather sheath with dangler.  Country of Origin: Japan