List of products by brand Ka-Bar

Ka-Bar EK 51 Commando Short Drop Point.

  The EK51 Short Drop Point has a 4.3125” drop point blade and measures 8.5” overall.  The steel is 1095 Cro-Van and the a MOLLE-compatible Celcon® sheath is included.  The knife is manufactured in the USA with German steel and the sheath is manufactured in the USA.

SPECIFICATIONS:--WEIGHT:  0.6 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  4.312 inches--OVERALL LENGTH:  8.5 inches--EDGE ANGLES:  20--SHAPE:  Drop Point--TANG STAMP:  KA-BAR/Ek Commando--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Ultramid--ROCKWELL HARDNESS:  56-58--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.25 inches

USA

KA-Bar 1121 Three Piece Throwing Knife Set with Pouch.

  The KA-BAR Throwing Knife Set features three throwing knives and a polyester storage pouch.  The Throwing Knives are made of 3Cr13 steel and are marked with the KA-BAR Skull logo.  Stock up on this throwing knife set and limit your time walking back and forth to your target!  Please note throwing knives are not sharpened.

--BLADE LENGTH:  4 inches

--OVERALL LENGTH:  9.375 inches

PRC

KA-BAR's third introduction into the John Ek Commando Knife Co. product line is the highly anticipated Model 5. This updated version of the occupational fighting knife with hilt is made from 1095 Cro-Van and features a parkerized bowie blade, textured glass-filled nylon handles and traditional X-head fasteners. A US-made Celcon® sheath with retaining strap, self-locking function and multiple tie-down points is also included. Made in the USA. SELECT SPECS: --Weight: 0.70 lb --Steel: 1095 Cro-Van --Measurements: -Blade length 6.875" -Overall length: 12.9375" --Grind: Flat --Edge Angles: 20 Degrees --Handle Material: Glass-Filled Nylon --Blade Shape: Bowie --HRC: 56-58 --Stamp: KA-BAR/Ek Commando Knife Co. --Butt Cap/Guard: 12ga Commercial Grade Steel USA

Ka-Bar EK50 Commando Short Clip Point Blade.

  The EK50 Short Clip Point has a 1095 Cro-Van clip point blade that measures 5.0625” in length.  The EK50 is 9.25” overall and weighs 0.65 lb.  A MOLLE compatible Celcon® sheath that is manufactured in the USA comes with the EK50.  Knife manufactured in the USA with German steel.

SPECIFICATIONS:--WEIGHT:  0.65 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  5.062 inches--OVERALL LENGTH:  9.25 inches--EDGE ANGLES:  20--SHAPE:  Clip Point--TANG STAMP:  KA-BAR/Ek Commando--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Ultramid--ROCKWELL HARDNESS:  56-58--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.312 inches      USA

Ka-Bar NAVY Vietnam Commemorative Fighter. Blade features gold color Vietnam War etching and USN tang stamp. US NAVY brown leather belt sheath. Knife is 12" overall with a 7" black epoxy powder coated carbon steel blade with blood groove. Black epoxy powder coated carbon steel guard and butt cap. Stacked leather handle. Knife made in USA

In an ever-changing world, the need for preparedness has never been greater. Without notice the game can change and the rules no longer apply. Questioning your gear at a crucial moment is not an option. Whether setting up camp or securing your perimeter, the Original Zombie® knives are designed to perform under the most rigorous, unexpected and apocalyptic situations. Now Made in the USA!!! Knife comes mounted with toxic green handles. Extra set of black scales and "Acheron" skeleton knife included. Zombie® patch included (mounted on sheath.) 9 5/8" black blade USA

Ka-Bar Tanto 8 Inch Tanto blade of 1095 Steel. Black epoxy powder coat on blade. Kraton G thermoplastic elastomer handle. 12.88 Inches overall length. Molded Kydex sheath. Combo edge.

Ka-Bar ARMY Fighting Knife The most famous fixed blade knife in the World - "the KA-BAR" - was designed to serve our troops during World War II and is still doing its job, with honors, more than 50 years later. 1095 carbon steel blade, epoxy powder coated. U.S. ARMY tang stamp. Stacked leather handle Blade length 7", overall length 11 7/8" 0.68 lbs (blade only) Brown leather ARMY embossed sheath included. Knife USA

4.25" (10.8cm) closed. 3" (7.62cm) satin finish AUS-8 stainless drop point blade. Pink Zytel handle. Thumb stud. Pocket clip. Lanyard hole. Ka-bar has partnered with the country's leading cancer research center and it's physicians. The sales of this product will help accelerate new breast cancer research to seek a cure. Designed by Bob Dozier.

Taiwan

A partially serrated edge makes cutting looped and synthetic materials a breeze. Blade marked 1211. Hard plastic MOLLE compatible sheath included. Please note a rolling change has been made to the markings on the 1211 series of Fighting/Utility Knives.  The "1211 USA" marking has been removed and you may receive a knife without this marking.  Only the marking has changed; this is not a change to where or how these products are made.

SPECIFICATIONS:

--BLADE GUARD:  12GA Commercial Grade Carbon Steel

--BLADE LENGTH:  7.0 inches

--BLADE STEEL:  1095 Cro-Van

--BLADE THICKNESS:  0.165 inches

--BLADE WIDTH:  1.188 inches

--COLOR:  Black

--EDGE ANGLE:  20 Degrees

--GRIND:  Flat

--HANDLE MATERIAL:  Kraton G®

--KNIFE MANUFACTURED IN

United States

--NSN:  1095-01-554-2451 KNIFE-COMBAT

--OVERALL LENGTH:  11.875 inches

--ROCKWELL HARDNESS:  56-58

--SHAPE:  Clip Point

--WEIGHT:  0.7 lb

USA

TDI LAW ENFORCEMENT KNIFE KB02-1481 Designed by a Officer for Officers, by John Brenner, Founder of Tactical Defense Institute. Designed to be worn with a duty belt, concealed behind it, A last ditch weapon for Police Officers.

Designed by Ethan Becker, the BK19 shares select traits with the highly sought after Becker BK18 Harpoon, such as handle scales, Celcon® sheath, and burnt bronze color.  The BK19 stands out with its Nessmuk blade shape, a fan favorite in the bushcraft community.  BK16HNDL Micarta® handles will fit the BK19.   Manufactured in Olean, NY with raw German 1095 Cro-Van steel, the KA-BAR  Like all KA-BAR products, the BK19 comes with a limited lifetime warranty.

SPECIFICATIONS:

--BLADE LENGTH:  4.3125 inches

--BLADE STEEL:  1095 Cro-Van

--BLADE THICKNESS:  0.165 inches

--BLADE TYPE:  Fixed Blade

--BLADE WIDTH:  1.45 inches

--COLOR:  Brown

--EDGE ANGLE:  20

--GRIND:  Flat

--HANDLE MATERIAL:  Ultramid

--OVERALL LENGTH:  9.125 inches

--ROCKWELL HARDNESS:  56-58

Knife and sheath made in USA

The KA-BAR Attachment System features two sets of loops, one large and one small, for a total of four. The Attachment System is made from Celcon® and comes with eight (8) slotted truss screws #8-32 x 3/8”, eight (8) posts #8-32 x 3/8”, and eight (8) spacers. The KA-BAR Attachment System is designed to work in a number of configurations, including horizontal carry, and may work with other products outside of the KA-BAR lineup, such as holsters. It is MOLLE-compatible; MOLLE straps and/or cordage are not included.

USA

Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.

  The most famous fixed blade knife in the World.  The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC.  Hard plastic MOLLE compatible sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  USMC--NSN:  1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches--KNIFE:  USA --SHEATH:  Taiwan

SHEATH ONLY!

Ka-Bar 1250S USMC Short Leather Sheath

  Fits KA-BARS with 5 1/4" blade and double guard. Made in Mexico.

SHEATH ONLY!

Ka-Bar 1235 Marine Hunter

  Classically styled leather-handled hunting knives have been popular since the early 1900s. Dressy enough for gift giving and practical for field use. Features a brass guard and aluminum butt cap. Hard shell lined leather KA-BAR® sheath included.

SPECIFICATIONS:--WEIGHT:  0.45 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  5.875 inches--OVERALL LENGTH:  10.75 inches--SHAPE:  Clip Point--TANG STAMP:  KA-BAR--KNIFE MATERIAL:  High Polished 5Cr15 Stainless Steel--GRIND:  Hollow--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  55-57--BUTT CAP/GUARD:  Aluminum/Brass--BLADE THICKNESS:  0.125 inches--BLADE WIDTH:  1.125 inches--Knife:  PRC--Sheath: Mexico