List of products by brand Kershaw

Where have you seen this profile before? Thats right. The new Kershaw Natrix is based on brother brand Zero Tolerances 0770, which itself was inspired by the award-winning ZT 0777. The design has apparently been the envy of certain other knifemakers. And now were taking it back. Kershaws new Natrix features a drop-point blade of 8Cr13MoV that offers solid performance with good edge-holding and easy resharpening. The Blackwashed blade finish looks good and even helps hide use scratches. Accessed with the built-in flipper, SpeedSafe assisted opening makes it easy to open the Natrix one-handed so its always ready when you need it. The handle is lightweight G-10, 3D-machined and chamfered to fit comfortably in the hand. An oversized pivot provides an attention-grabbing detail on the front of the knife, while Kershaw's patented Sub-Frame Lock secures the blade and provides a dramatic, contrasting line on the back. The Kershaw Sub-Frame Lock is covered under US Patent 69.120.234. The Sub-Frame Lock design also enables them to lighten the weight of the Natrix, so that you get a big, useful blade in a knife that still weighs in at a mere 2.9 ounces. A decorative aluminum backspacer lightens the load even further and adds another embellishment. Finally, a custom-designed deep-carry pocketclip echoes the lines of a special recess machined into the handle to complete this good-looking knife. Now the next time you see this famous knife profile, it will be from a manufacturer that has a right to the design: Kai. SELECT SPECS: --SpeedSafe® assisted opening --Steel Sub-Frame Lock --Flipper --Reversible deep-carry (left/right, tip-up) pocketclip --Steel: 8Cr13MoV, Blackwashed finish --All black hardware --Handle: G-10 --Blade length: 3.25 in. (8.3 cm) --Closed length: 4.25 in. (10.8 cm) --Open length: 7.5 in. (19.1 cm) --Weight: 2.9 oz. (82.2 g) PRC

Clean design elements define the Iridium. Its gray-anodized aluminum handle scales create an appealing profile. Activate the thumb stud and experience glassy smooth deployment with KVT ball bearings. Ultra-secure DuraLock technology locks the blade in place. The D2 spear point blade is ideal for everyday cutting tasks. And its two-tone blade finish is nothing less than stunning. A bronze-anodized backspacer and lanyard hole give the design an extra pop. Its fine details are also stunning: a two-tone blade finish and a bronze-anodized backspacer with a lanyard hole. When your work is done, slide the lock back to safely close the Iridium and carry it with a reversible deep-carry pocket clip. Go to the next level with the Iridium, the ultimate modern folder.

FEATURES:

--Stylish design with gray-anodized aluminum handle scale

--DuraLock secures the blade open using a solid steel crossbar; pull the ambidextrous lock back to safely close the knife

--D2 high-carbon tool steel is highly wear resistant, tough, offers excellent edge retention; two-tone blade finish with stonewashed flats and satin grinds

--Opens easily with KVT ball-bearing system and thumb studs

--Deep-carry pocketclip is easily reversible for left/right carry; bronze-anodized backspacer and lanyard hole

SPECIFICATIONS:

--Blade Length:  3.4 in. (8.6 cm)

--Blade Material  D2

--Blade Finish/Coating:  Stonewashed finish, satin grinds

--Blade Thickness:  0.107 in. (2.7 mm)

--Closed Length:  4.5 in. (11.4 cm)

--Handle Material:  6061-T6 aluminum

--Handle Finish/Coating:  Gray anodized

--Handle Thickness:  0.49 in. (12.5 mm)

--Overall Length:  7.9 in. (20 cm)

--Weight:  3.3 oz. (94 g)

PRC

Kershaw 5560 Radar.

  Conquer work tasks with the strong, yet easy-to-carry Radar. Its all-steel construction goes dark with an attractive BlackWash™ finish. You can open the drop point blade reliably with assisted opening. The easy-to-sharpen 8Cr13MoV blade steel is heat treated for a sharp edge, and a hollow grind allows for precision cutting. Plus, the jimping on the blade and handle spine offer a comfortable grip. The Radar has plenty of carry options, too, with a four-position deep-carry pocket clip and lanyard hole. With so much versatility, this Kershaw should be on your Radar.

--Blade Length:  2.9"

--Overall Length:  6.7"

PRC

NOTE:  SHIPS UPS ONLY! The Moonsault carves out a fresh new look with the comfort and style of curved handles and asymmetrical hole patterns that flow from side to side.The knife features solid steel handle construction, the smooth feel of bearing washers, and the same great Kershaw quality you’ve come to love in the Lucha. The spear point blade includes a piercing tip and a full width flat grind for balance while flipping and excellent cutting performance. And a “working finish” on the blade and handle hide even more scratches than stonewashed, helping the Moonsault look its best. Whether flipping or cutting, tag in the Moonsault as your next butterfly knife. FEATURES: Made-in-the-USA butterfly knife, symmetrical curved handles 14C28N stainless steel blade; increased nitrogen in the formula provides excellent corrosion resistance and hardenability; spear point blade with “working finish” that hides use scratches Dual KVT ball-bearing pivots for ultra-smooth flipping Balanced size, weight, and design for flipping SPECIFICATIONS:--Blade Length 4.6 in. (11.7 cm)--Blade Material 14C28N--Blade Finish/Coating Working finish--Blade Thickness 0.156 in. (4 mm)--Closed Length 5.9 in. (15 cm)--Handle Material Stainless steel--Handle Finish/Coating Working finish--Handle Thickness 0.43 in. (10.9 mm)--Overall Length 10.25 in. (26 cm)--Weight 6.1 oz. USA

Where have you seen this profile before? Thats right. The new Kershaw Natrix is based on brother brand Zero Tolerances 0770, which itself was inspired by the award-winning ZT 0777. The design has apparently been the envy of certain other knifemakers. And now were taking it back. Kershaws new Natrix features a drop-point blade of 8Cr13MoV that offers solid performance with good edge-holding and easy resharpening. The stonewashed blade finish looks good and even helps hide use scratches. Accessed with the built-in flipper, SpeedSafe assisted opening makes it easy to open the Natrix one-handed so its always ready when you need it. The handle is lightweight G-10, 3D-machined and chamfered to fit comfortably in the hand. An oversized pivot provides an attention-grabbing detail on the front of the knife, while our patented Sub-Frame Lock secures the blade and provides a dramatic, contrasting line on the back. The Kershaw Sub-Frame Lock is covered under US Patent 69.120.234. The Sub-Frame Lock design also enables us to lighten the weight of the Natrix, so that you get a big, useful blade in a knife that still weighs in at a mere 2.9 ounces. A decorative aluminum backspacer lightens the load even further and adds another embellishment. Finally, a custom-designed deep-carry pocketclip echoes the lines of a special recess machined into the handle to complete this good-looking knife. Now the next time you see this famous knife profile, it will be from a manufacturer that has a right to the design: Kai. SELECT SPECS: --SpeedSafe® assisted opening --Steel Sub-Frame Lock --Flipper --Reversible deep-carry (left/right, tip-up) pocketclip --Steel: 8Cr13MoV, stonewashed finish --Handle: G-10 --Blade length: 3.25 in. (8.3 cm) --Closed length: 4.25 in. (10.8 cm) --Open length: 7.5 in. (19.1 cm) --Weight: 2.9 oz. (82.2 g) PRC