FOLDING KNIVES

Spyderco C247CFP Siren Salt Plain Edge 

with Carbon Fiber handles. SPRINT RUN.

Features a 3 1/2" flat ground plain edge blade of CPM S90V Stainless.  Solid textured carbon fiber handles.  Mid-Lockback design.  Pocket clip adjustable for right or left side tip-up carry.

5" closed.

USA

Spyderco C136PBBK Persistance
Black Blade Plain Edge
The Spyderco Persistance C136PBBK features a black 2 3/4" flat ground plain edge leaf blade of 8Cr13MoV stainless steel.
Black FRN Handles. Dual black skeletonized liners. Black Stainless pocket clip. Drilled and tapped on all four corners for tip-up, tip-down, left or right side carry. Linerlock. Thumb jimping on blade.
4 1/8" closed.
PRC

Made in China

Emerson SARK BTS Search and Rescue Knife - Black Partially Serrated Blade

NOTE:  New old stock direct from Emerson.  Found in back room.  Individually serial numbered - blade dated 2011.

  The Emerson SARK Model is just one of the Search and Rescue Knife Models that we offer. Featuring a blunted blade tip to avoid piercing skin or other sensitive materials. When the U.S. Navy needed a rescue knife they came directly to Emerson. The SARK knife was designed specifically for emergency use situations where safety and effectiveness are equally important. This is an official issue rescue knife to the elite U.S. Navy Rescue Teams. It was designed according to their parameters, field tested in actual emergency conditions, and chosen just as you see it here.

SPECIFICATIONS:--Handles:  G-10--Lock:  Titanium--Pocket Clip:  Black Stainless Tip Up--Blade: 154CM--Finish:  Black--Grind:  Chisel Grind--Edge:  Partially Serrated--WAVE Feature--Thumb Disc--Overall Length:  8.2"--Blade Length:  3.5"--Blade Hardness:  57-59 RC--Weight:  4 oz.

Made in USA

Emerson SARK BT Search and Rescue Knife - Black Plain Edge Blade.

NOTE:  New old stock direct from Emerson.  Found in back room.  Individually serial numbered - blade dated 2011.

  The Emerson SARK Model is just one of the Search and Rescue Knife Models that we offer. Featuring a blunted blade tip to avoid piercing skin or other sensitive materials. When the U.S. Navy needed a rescue knife they came directly to Emerson. The SARK knife was designed specifically for emergency use situations where safety and effectiveness are equally important. This is an official issue rescue knife to the elite U.S. Navy Rescue Teams. It was designed according to their parameters, field tested in actual emergency conditions, and chosen just as you see it here.

SPECIFICATIONS:--Handles:  G-10--Lock:  Titanium--Pocket Clip:  Black Stainless Tip Up--Blade:  154CM--Finish:  Black--Grind:  Chisel Grind--Edge:  Plain Edge--WAVE feature--Thumb disc--Overall Length:  8.2"--Blade Length:  3.5"--Blade Hardness:  57-59 RC--Weight:  4 oz.

Made in USA

Brad Zinker always manages to uncover new facets of the popular Boker Plus Urban Trapper. As a master of his craft, the US knife designer knows better than anyone else how to reinvent the existing designs of the gentleman's knife with clever combinations of materials. The Boker Plus Urban Trapper Jigged Titanium comes with a surface-ground and ball-bearing VG-10 blade with a hairline finish, which opens with a flipper and is secured by a robust linerlock. A modern accent is set by the titanium handle, which pays homage to the countless classics with jigged-bone handle scales. This not only places the knife right up front visually, but also significantly enhances the feel of the pocket-knife. The stainless steel deep-carry clip allows for tip-up (r) carry and is finished with a stonewash finish.

SPECIFICATIONS:--Overall Length:  7.68 in--Blade Length:  3.50 in--Blade Thickness:  0.10 in--Weight:  2.61 oz--Designer:  Brad Zinker--Blade Material:  VG-10--Handle Material:  Titanium--Opener:  Flipper--Lock Type:  Linerlock  PRC

Spyderco C261P UpTern. The UpTern features a 2 3/4" full flat ground plain edge blade of 8Cr13MoV Stainless Steel. Brushed Stainless Steel Handles. Pocket clip. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry. Mid-lockback design. 3 3/4" closed. PRC

Spyderco C261PS UpTern Partially Serrated. The UpTern features a 2 3/4" full flat ground partially serrated blade of 8Cr13MoV Stainless Steel. Brushed Stainless Steel Handles. Pocket clip. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry. Mid-lockback design. 3 3/4" closed. PRC

Kershaw 1401 Jetpack
The unique, angular Jetpack boosts its way into the Kershaw lineup with an array of features. This liner lock folder is highly efficient at piercing cuts with its tanto blade. Complete everyday work tasks efficiently with its ergonomic grip. A glass-filled nylon overlay adds a unique look to the steel handle. This Starter Series knife is upgraded with 8Cr13MoV blade steel for a longer-lasting edge. When it comes to work task possibilities, the sky is the limit with the Jetpack.
SPECIFICATIONS:--Blade Length: 2.75 in. (7 cm)--Blade Material: 8Cr13MoV--Blade Finish/Coating: Stonewashed finish--Blade Thickness: 0.11 in. (2.79 in.)--Closed Length: 3.75 in. (9.5 mm)--Handle Material: Stainless steel, glass-filled nylon overlay--Handle Finish/Coating: Stonewashed finish--Handle Thickness: 0.51 in. (12.95 mm)--Overall Length: 6.5 in. (16.5 cm)--Weight: 2.9 oz. (82 g)
PRC

Spyderco C260TIP David Rydbom Designed Stovepipe.
The Stovepipe is the definition of STOUT. Features a 2 3/4" dark stonewashed blade of CPM-20CV steel. The dark stonewashed Titanium handles and pocketclip gives this knife a bullet proof feel. Framelock
4" closed.
Taichung

Cold Steel 32AA Oyabun Limited Edition
Lynn C. Thompson Signature Knife - The Oyabun Limited is a high-end collectible version of our Oyabun. It shares features in common with the standard model in terms of functionality and appearance but differs markedly in the materials used in its construction. It also has the value of being a collectible keepsake in that only 3500 have been produced. Each is individually serial numbered, and each box will be personally signed by Lynn C. Thompson himself! The premium S35VN steel in the blade is a costly powdered steel that is heat treated to Rc 59-60 and sub zero quenched. It has been given an attractive two-tone line grain finish on the blade flats, and a high satin polish on the blade bevels. Most noticeably, the handle frame is milled from two solid billets of 6061 aluminum to create the bolster and pommel, which have been given a fine mirror polished finish. The handle also features CNC machined G-10 slabs with a diamond checkering pattern for a good secure grip.
SPECIFICATIONS:--Each knife individually serial numberd--Each box personally signed by Lynn Thompson--Blade Thickness: 3.8mm--Handle Length/Material: 4 3/4in Aluminum with G-10 Scales--Overall Length: 8 1/4in Taiwan