KNIFE BRANDS

Case XX full size two blade Trapper with  Smooth Natural Bone handles.  Front handle embossed in green with "Jeep" and a mountain motif.  Stainless Clip and Spey blades.  4 1/8" closed.

USA

Case XX two blade Mini Trapper with Smooth Antique Bone handles.  Front handle embellished with "Jeep" and meridian.  Stainless Clip and Spey Blades.  3 1/2" closed.  USA

The Spyderco Counter Puppy is a high quality small kitchen paring knife.  It would also serve well as a steak knife.  The Counter Puppy may very well become your go to knife in the kitchen.

  7" (17.78cm) overall. 3.5" (8.89cm) satin finish 7Cr17MoV stainless blade. Blue plastic handle. Novel design allows the knife to stand upright on a counter or tabletop.  Dishwasher safe.

PRC

Since its introduction in 2011, Michael Janichs Yojimbo 2 design has earned a respected place in Spydercos product line and legions of devoted followers worldwide. The YoJumbo builds on that success, scaling the design up by over 20 percent and refining its ergonomics to accommodate a wider range of hand sizes. Its formidable four-inch (102mm) Wharncliffe blade is hollow ground for superior edge geometry and features a fully accessible Trademark Round Hole for swift, ambidextrous, one-handed opening. The handles open-backed construction and nested, skeletonized stainless steel liners keep weight to a minimum, while its coarse-textured G-10 scales promote a positive, non-slip grip. A high-strength Compression Lock and four-position pocket clip complete the package, making the YoJumbo a truly formidable cutting tool optimized for personal-defense carry. Specs: Overall Length: 9.29" Blade Length: 3.98" Blade Thickness: 0.145" Blade Steel: Satin CPM-M4 Blade Grind: Hollow Lock Type: Compression Opener: Spyderco Round Hole Weight: 5.3 oz Pocket Clip: 4 position Handle: Jade G-10 USA

The SpyMyto™ is a truly unique folding knife that was inspired by the lionSTEEL® Myto™ and is produced by lionSTEEL exclusively for Spyderco. Its hollow-ground, drop-point blade is crafted from M398—an enhanced version of Böhler-Uddeholm’s M390 capable of achieving extremely high hardness and wear resistance. In addition to a fully accessible Trademark Round Hole, the blade features a removable flipper opener, ball bearing pivot washers, and a beautifully radiused spine. The SpyMyto’s handle consists of a linerless green Micarta scale on one side and a solid titanium scale on the other. The latter forms the foundation of the knife’s stout Reeve Integral Lock (R.I.L.) mechanism, which includes a hardened steel interface/overtravel stop. Both scales have painstakingly machined textured chamfers and are joined by a carbon fiber backspacer. A reversible deep-pocket clip mounts to the butt end of the handle to provide left or right-side tip-up carry. This stunning knife is being released as a Flash Batch—a distinctive, one-of-a-kind expression of a model that has not been previously released. Every knife will be individually serialized with discreetly placed laser engraving.  Limited production of 2000.

SPECS:

--Overall Length:  7.77" 

--Blade Length:  3.32" 

--Steel:  Bohler M398

--Closed Length:    4.45" 

--Weight:  3.6oz

--Blade Thickness:  0.157" 

--Clip Position:  Ambi

--Tip Carry Position:  Tip-Up

--Lock:  R.I.L. 

--Blade Grind:  Hollow

Italy

Spyderco C101MPCW2 Manix 2 This Manix 2 features a sanded but not polished brown canvas micarta handle.  Flat ground plain edge blade of premium CPM Cru-Wear high carbon steel.   Spyderco Ball Bearing lock. Blade length is 3 5/16". 4.9 ounces overall weight. Golden CO USA Earth

NOTE:  Cru-Wear is a high carbon steel and not a stainless steel.  Keep blade clean, dry and lightly oiled to help preserve the finish.

Benchmade 15505 Meatcrafter field and kitchen knife.

  When your adventures afield transition to the kitchen, the right cutting tool will make all the difference. The Benchmade 15505 Meatcrafter is a hybrid hunting fixed blade with a fine, smooth edge to trim, debone, or slice your preferred cuts of meat. Featuring Benchmade’s new SelectEdge technology, the 28 inclusive edge angle on CPM-154 stainless steel provides the perfect balance of a fine grain, sharp edge with carefully engineered blade flex. This knife makes just as much sense in the back of your truck as it does in the kitchen drawer.

FEATURES:

--Blade Edge:  Plain

--Blade Finish/Color:  BeadBlast

--Blade Steel:  CPM-154 

--Hardness:  (58-61 HRC)

--Blade Style/Shape:  Trailing Point

--Handle Material:  Dark Olive Santoprene

--Lanyard Hole:  Yes

--MOLLE Compatible:  No

--Sheath Type:  Boltaron

SPECIFICATIONS:

--BLADE LENGTH - 4"

--BLADE THICKNESS - 0.09" | 2.286mm

--OVERALL LENGTH - 8.86"

--WEIGHT - 2.71 pz 

--HANDLE THICKNESS - 0.67" | 17.02mm

--Brand:  Benchmade

--Model Name:  Meatcrafter

--Model Number: 15505

--Item Number:  BM15505

--Country of Origin:  USA

A heavy-use folding knife built for tasks in wet environments — from bait prep to cutting lines to scaling small fish — the Adira™ is truly a waterman’s EDC, crafted to support your outdoor lifestyle on and off the water. Featuring a 3.6” drop-point blade made of CPM-MagnaCut stainless steel, this pocket-ready aquatic folder uses an AXIS® Lock mechanism with stainless springs and takes advantage of hi-vis colored details with a useful orange lanyard for easy pocket access. Sure to be any outdoorsman's favorite folder.

SPECS:

--Open Length:  9'' | 22.86cm

--Blade Length:  3.88'' | 9.86cm

--Blade Thickness:  0.114'' | 2.9mm

--Closed Length:  5.12'' | 13.0cm

--Handle Thickness:  0.663'' | 16.84mm

--Mechanism:  AXIS® Lock

--Blade Style:  Drop-Point

--Pocket Clip:  Tip-up Black Oxide Deep Carry

--Blade Finish:  Stonewash polish

--Handle Material:  Depth Blue Grivory®

--Lanyard Hole:  Yes with Lanyard

--Blade Steel:  CPM-Magnacut

--Weight:  4.23oz | 119.92g

USA

The Undercurrent™ is your reliable fixed blade for hard-use utility while on the water. Featuring a sheepsfoot style blade made of CPM-MagnaCut steel with partial serrations for cutting lines, ropes, and bait, the Undercurrent™ is a cinch to clean. Complete with a Sonar Gray molded sheath that mounts on your belt, pack or boat, with push button retention release for quick access, the Undercurrent™ pulls you in with simplicity and performance that can't be matched.

SPECS:

--Overall Length:  9.4353'' | 23.97cm

--Blade Length:  4.321'' | 10.98cm

--Blade Thickness:  0.12'' | 3.05mm

--Handle Thickness:  0.846'' | 21.49mm

--Fixed Blade

--Blade Style:  Sheepsfoot

--Blade Finish:  Stonewash

--Handle Material:  Depth Blue Santoprene®

--Lanyard Hole

--Blade Steel:  CPM-Magnacut

--Blade Edge:  Partially Serrated

--Weight:  5.38oz | 152.52g

USA

In the years since the 535 Bugout® first hit the market, this slim, lightweight and durable folder has redefined EDC style and versatility from the trail to the workplace and everywhere in-between through all of life’s adventures. The 535-12 Bugout® is an instant eye-catcher in easy-to-maintain CPM-S30V premium stainless steel with a Satin finish and earthtone Tan Grivory® handle scales with gold anodized thumb stud and backspacers for that pop of color. The tool in your outdoor kit that you can’t leave behind. Gear up and bug out.

SPECS:

--Blade Length:  3.235"

--Blade Shape:  Drop Point

--Blade Edge:  Plain Edge

--Blade Finish:  Stonewashed

--Handle:  Tan Grivory

--Axis Lock

--Black reversable pocket clip

--Weight:  1.5 oz

--USA

Benchmade 430SBK-02 Redoubt Partially Serrated with D2 Steel.

If there is ever a time when you must go alone, the brand-new 430SBK-02 Redoubt will keep you confident and capable. Made in the USA for when you're your own first responder, the 430SBK-02 Redoubt is a solid EDC for utility and self-defense. Grivory® handles and a drop-point CPM-D2 blade make this modern workhorse Black Class knife a reliable addition to your preparedness kit - or your pocket!

FEATURES:

--Blade Edge: Partially Serrated

--Blade Finish/Color: Black Cerakote

--Blade Steel: CPM-D2

--Blade Style/Shape: Drop-point

--Clip Type: Deep-Carry

--Clip Position: Reversible Tip-Up

--Handle Material: Grivory - Black

--Lanyard Hole: Yes

--MOLLE Compatible: No

SPECIFICATIONS:

--Blade Length: 3.55" | 9.02cm

--Blade Thickness: 0.125" | 3.175mm

--Open Length: 8.29" | 21.06cm

--Closed Length: 4.75" | 12.07cm

--Handle Thickness: 0.61" | 15.49mm

--Weight: 3.7oz. | 104.89g

--Brand: Benchmade

--Model Name: Redoubt

--Model Number: 430SBK-02

--Item Number: BM430SBK-02

Country of Origin: USA

The smaller - more compact Para 3 features a full flat grind plain edge satin finished 3" blade of CPM CRUWEAR steel. Brown unpolished Canvas Micarta scales over stainless liners. Compression lock. Drilled and tapped on all four corners for tip-up, tip-down left or right side carry. 4 1/4" closed. USA

NOTE:  CRUWEAR is not a stainless steel.  While considered by many to be a superior pocket knife steel, it will stain and corrode.  Keep blade clean, dry and lightly oiled to help preserve the finish.

When Benchmade’s AXIS® lock technology was released on the original 710 back in 1999, it sent more than ripples through the knife industry; it was a tsunami. The innovative AXIS® lock changed the game — all thanks to the designer duo Benchmade collaborated with on the invention, Bill McHenry and Jason Williams, renowned custom knifemakers with watchmaking roots. The sleek, new 710FE-2401 is a testament to McHenry and Williams’ craftwork. Celebrating the 25th Anniversary of AXIS® lock technology, the 710FE-2401 has the same large frame and ample cutting power of the original 710 and features a stylish drop-point, recurved blade made of mighty CPM-Magnacut steel with an FDE PVD finish and black thumb studs. The 710FE-2401 has a lightweight aluminum handle with milled black anodized finish, and milled FDE PVD backspacer and pivot ring. A Limited anniversary variant, inspired by its original designers.

SPECS:

--Open Length:  8.95'' | 22.73cm

--Blade Length:  4'' | 10.16cm

--Blade Thickness:  0.114'' | 2.9mm

--Closed Length:  4.98'' | 12.65cm

--Handle Thickness:  0.557'' | 14.15mm

USA

Originally introduced in 1992, the Catcherman was a folding fillet knife specifically designed to meet the needs of discriminating fishermen. One of our last models to feature an integral molded pocket clip, it also became a cult classic among serious Spyderco collectors. This limited-edition Sprint Run resurrects this unique design in a form that is distinctly different from all its predecessors. For the first time, its thin blade is full-flat ground and showcases ultra-corrosion-resistant LC200N steel. The partially serrated CombinationEdge™ blade is paired with a one-piece fiberglass-reinforced-nylon (FRN) handle injection molded in the signature bright green of our LC200N lightweight models. It faithfully includes the original Volcano Grip™ texture pattern on one side and an integral pocket clip on the other to provide right-side, tip-up carry.

SPECIFICATIONS:

Overall Length:  10.43" 

--Blade Length:  4.64" 

--Steel:  LC200N

--Closed Length:  5.92" 

--Edge Length:  4.35" 

--Weight:  2.8oz 

--Blade Thickness:  0.07"  

--Handle:  Green FRN

--Clip Position:  Right Tip 

--Carry Position:  Tip-Up

--Lock Type:  Back Lock

--Grind:  Full-Flat

Seki-City