Spyderco Knives

This tour-de-force expression of the Para Military 2 showcases a full-flat-ground blade crafted from CPM MagnaCut—a state-of-the-art particle metallurgy steel that offers an exceptional balance of edge retention, toughness, and superior corrosion resistance. Cloaked in a non-reflective Diamond-Like Carbon (DLC) coating, the PlainEdge blade is housed in a handle featuring peel-ply-textured black G-10 scales machined with the signature Caribbean Bi-Directional Texture pattern of Spyderco’s US-made Salt Series knives. To complement its blade steel and finish, the knife’s nested stainless steel liners, four-position pocket clip, and all other hardware are also made from ultra- corrosion-resistant materials and black coated.

SPECIFICATIONS:

--Overall Length:  8.26" 

--Blade Length:  3.45" 

-Steel:  CPM MagnaCut - Black DLC 

--Closed Length:  4.82" 

--Edge Length:  3.05" 

--Weight:  3.9oz 

--Blade Thickness:  0.145" 

--Handle:  Black G-10

--Clip Position:  Ambi - drilled and tapped on all four corners for left or right tip up or tip down carry.  

--Lock Type:  Compression

--Grind:  Full-Flat

--Hardware:  All black

USA

PRE-OWNED

This item is a little complicated.  You will receive an as new Manix 2 with aluminum purple/red scales with a Tritium insert in the lock tab.  You will also receive a Blue anodized set of scales with extra liners AND the original black G-10 scales - so...two extra handle scales come with this purchase.  Below is description of the stock version:

Spyderco C101PBK2 Manix 2 This lightweight Manix 2 features a Black G-10 handle with textured sections for improved grip. CPM S30V edge blade. Spyderco Ball Bearing lock. Blade length is 3 5/16".  Golden CO USA Earth

No signs of use or carry.  Original factory edge.

Knife and all included accessories are as new.  Original box and paperwork in excellent condition.

NOTE:  While as in "as new" condition, be advised we obtained this from a collector, so consider it used.

Make an even bolder fashion statement with this enhanced version of the pink-handled Para 3 Lightweight. It adds a black Diamond-Like Carbon (DLC) coating to the CTS BD1N blade and matching black coatings to the handle’s liners, clip, and hardware. The result is a stunning two-tone color scheme that is sure to turn heads.

SPECIFICATIONS:

--Overall Length:  7.2" (183mm)

--Blade Length:  2.93" (74mm)

--Steel:  CTS BD1N - Black DLC

--Closed Length:  4.29" (109mm)

--Edge Length:  2.58" (66mm)

--Weight:  2.4oz (68g)

--Blade Thickness:  0.145" (3.7mm)

--Handle:  FRN - Pink

--Clip Position:  Ambi

--Tip Carry Position:  Tip-Up

--Lock Type:  Compression

--Grind:  Full-Flat

USA

ON ORDER - CLICK THE NOTIFY ME BUTTON TO GET AN EMAIL WHEN AVAILABLE.  WE SHOULD GET MULTIPLE SHIPMENTS OF THIS DESIRABLE SPRINT RUN 

This unique, limited-edition expression of the Military 2 proudly showcases Crucible CPM S90V blade steel and stunning carbon fiber handle scales. CPM S90V’s advanced alloy composition promotes the formation of hard vanadium carbides instead of chromium carbides, enhancing the steel’s wear resistance while leaving more free chromium available for superior corrosion resistance. The full-flat-ground PlainEdge blade of this elite knife takes full advantage of these qualities to deliver unparalleled cutting performance. It is housed in a handle featuring solid carbon fiber scales with a subtle peel-ply texture for a secure grip. Stainless steel liners nested within the scales provide superior structural strength and form the foundation of the knife’s high-strength Compression Lock mechanism. They also anchor its four-position pocket clip, which supports ambidextrous tip-up or tip-down carry.

SPECIFICATIONS:

--Overall Length:  9.51" (242mm)

--Blade Length:  4.00" (102mm)

--Steel:  CPM S90V(420V)

--Closed Length:  5.51" (140mm)

--Edge Length:  3.65" (93mm)

--Weight:  4.4oz (124g)

--Blade Thickness:  0.145"  

--Handle:  Carbon Fiber

--Clip Position:  AmbiTip 

--Carry Position:  4-positionL

-Lock Type:  Compression

--Grind:  Full-Flat

USA

The Michael Janich designed Microjimbo fits into a small easy to carry package that still manages to perform as the full size version.  Features a 2 3/8" full flat ground plain edge satin finished blade of CPM-S30V stainless steel.  The textured black G-10 handle scales incorporate the Spyderco Compression Lock for secure use.  Left or right side tip up wire pocket clip.  

3 3/4" closed.  USA

Spyderco C101PYL2 Manix 2. A recipe for folding knife success: Start with hard-use rated lock. Add a blade made of Premium Magnacut steel. Manufacture it in Golden, Colorado using precise tolerances then add a healthy dash of American innovation. These ingredients are the Manix 2; a concoction of solo features and when combined, make one of the strongest knives from Spyderco to date. Patented by Spyderco, the Manix 2 has a Ball Bearing Lock. It's a hardened free-floating ball bearing contained in a custom hi-tech polymer cage. The round ball bearing allows the lock to self adjust across a large surface, smoothly and consistently locking-up with solid confidence. Evolving over time, the Ball Bearing Lock's strength withstands hard work with a secure, versatile and comfortable grip. Ergonomics are peerless in this design. The blade is Premium Magnacut steel and flat-ground with aggressive thumb serrations (jimping) above a super sized 14mm Spyderco Round Hole. The jimping doesn't stop there. With full steel liners, the scales have jimping that extends beyond the Yellow FRN handle scales scalloping areas of the handle's perimeter. This one is not slipping out of your hand and works well with gloves on. The liners pull double purpose by adding rigidly and lightweight strength to the handle. A three-screw clip is left/right-hand carry, positioned for comfort and deep pocket carry. The knife also has a large lanyard pipe to protect various types of cords or thongs. Blade length: ~ 3 1/3" Closed length: ~4 5/8"  USA

This newest lightweight member of the Sage Series supercharges its design with a blade made from Micro-Melt Maxamet. Maxamet is an extremely hard powdered tool steel with properties that transcend conventional high speed steels. The Sage 5's full flat ground, leaf shape blade takes full advantage of these attributes. It's handle features nested skeletonized stainless steel liners, distinctive cool gray lightweight FRN handles, and a reversible deep carry wire pocket clip. Specs: Overall Length: 7.14" Blade Length: 3.00" Blade Steel: Maxamet Blade Grind: Full Flat Blade Thickness: 0.118" Handle Material: Gray FRN Lock Type: Compression Lock Weight: 3.4oz Pocket Clip: Tip Up Wire Clip Country of Origin: Taiwan

SC306CBN

NOTE:  This is a BRAND NEW SPYDERCO 306CBN flat stone.  Still wrapped in factory plastic.  Includes split leather slip cover for storage.  Does NOT include the original packaging as it came from Spyderco.

Cubic Boron Nitride (CBN) is a high-tech superabrasive that is second in hardness only to diamond. Offering greater abrasion resistance and thermal conductivity than conventional abrasives like silicon carbide and aluminum oxide, CBN removes steel quickly and efficiently. Spyderco's new 3x8 benchstone combines the many advantages of CBN with a classic flatstone format to supercharge traditional sharpening technique.

The broad, perfectly flat carbon steel embryo of this stone is coated with fast-cutting 400-mesh CBN on one side and finer 800-mesh CBN on the other. Ideal for putting an edge on knives, this stone is also the perfect choice for sharpening wood chisels, plane irons, and similar tools and comes complete with a high quality suede protective case.

Be advised, while this is brand new and unused, it does not have original packaging - but it IS original Spyderco!

Since its introduction in 2011, Michael Janichs Yojimbo 2 design has earned a respected place in Spydercos product line and legions of devoted followers worldwide. The YoJumbo builds on that success, scaling the design up by over 20 percent and refining its ergonomics to accommodate a wider range of hand sizes. Its formidable four-inch (102mm) Wharncliffe blade is hollow ground for superior edge geometry and features a fully accessible Trademark Round Hole for swift, ambidextrous, one-handed opening. The handles open-backed construction and nested, skeletonized stainless steel liners keep weight to a minimum, while its coarse-textured G-10 scales promote a positive, non-slip grip. A high-strength Compression Lock and four-position pocket clip complete the package, making the YoJumbo a truly formidable cutting tool optimized for personal-defense carry. Specs: Overall Length: 9.29" Blade Length: 3.98" Blade Thickness: 0.145" Blade Steel: Black M4 Blade Grind: Hollow Lock Type: Compression Opener: Spyderco Round Hole Weight: 5.3 oz Pocket Clip: 4 position Handle: Jade G-10 USA

This lightweight Manix 2 features a White Fiberglass Reinforce Nylon (FRN) handle with textured sections for improved grip. Black REX 45 plain edge blade. Spyderco Ball Bearing lock. Blade length is 3 5/16". 2.85 ounces overall weight. Golden CO USA Earth

Spyderco C258GFBLP Stretch 2 XL. Blue Nishijin glass fiber handle scales. D.P.S. 15 Damascus Plain Edge Blade.

This elite Stretch 2 XL is big enough for the job, but light enough to carry every day without weighing you down.

--Blade Length: 3.92"

--Closed Length: 4.97"

--Overall Length: 8.85"

--Blade Steel: D.P.S. 15 Damascus - VG-10 core flanked by two pieces of 15-layer damascus.

--Blade Finish: Damascus

--Blade Grind: Full Flat

--Blade Edge: Plain Edge

--Handle Material: Blue Nishijin glass fiber.

--Drilled and tapped on all four corners for left or right side tip-up or tip-down carry.

--Pocket Clip

--Lockback

Seki City

Pre-owned:

Spyderco C79PSBK2 Early production (AD - 01/2004) Assist.  Features a 3 5/8" 80% serrated wharncliffe style rescue blade. Thumb hole opener.  Hood on blade for thumb opening.  Handle incorporates a rescue whistle.  Mid-lockback with Boye Dent.  Reversible wire pocket clip for right or left side tip-up carry.  

5" 

Seki City.

Knife is in excellent condition.  No signs of use or carry.  Original factory edge.  Original box.  We sold this knife new to a collector who took it home and put it in a safe until now.

NOTE:  While in excellent condition, be advised we obtained this from a collector, so please consider it used.

Spyderco Endura 4 Lightweight Sprint Run Full Flat Ground with Bright Blue FRN Handle Scales First produced in the 1980's, the Spyderco Endura was one of the first knives to feature a pocket clip and it's light weight made it easier to carry than the sheath knives that were typical then. Now in it's 4th generation, the Delica has been tweaked and improved so now there are variations to meet nearly any users needs. The Endura 4 lightweight is distinguished by its skeletonized steel liners and fiberglass reinforced nylon (FRN) handle. This variant features a full flat ground plain edge blade of  black titanium carbonitride (TiCN)  S335VN stainless steel.   Obverse of blade marked with serial number, TNP (for "The Nutnfancy Project) and date of 12/2021.  The blade locks via a sturdy back lock that provides a secure lock up and allows for easy lock release with either hand. The FRN handles on the Endura 4 Lightweight feature Bi-Directional Texturing for a secure grip, and a hourglass pocket clip that can be mounted on the left or right side in the tip up or tip down position. Specs: Weight: 3.4 ounces Overall Length: 8.75 inches Blade Length: 3.75 inches Blade Steel:  S35VN Blade Thickness: .125 inches Blade Shape: Modified Drop Point Blade Grind: Full Flat Blade Finish: Black TiCN coated.  Handle Material: Bright Blue FRN 

Hardware:  All Black Lock Type: Back Lock Opening Mechanism: Round Hole Pocket Clip: Reversible, Tip Up/Down Country of Origin: Japan

Spyderco Endura 4 Lightweight Full Flat Ground with Teal FRN Handle Scales First produced in the 1980's, the Spyderco Endura was one of the first knives to feature a pocket clip and it's light weight made it easier to carry than the sheath knives that were typical then. Now in it's 4th generation, the Delica has been tweaked and improved so now there are variations to meet nearly any users needs. The Endura 4 lightweight is distinguished by its skeletonized steel liners and fiberglass reinforced nylon (FRN) handle. This variant features a full flat ground plain edge blade of S30V stainless steel. The blade locks via a sturdy back lock that provides a secure lock up and allows for easy lock release with either hand. The FRN handles on the Endura 4 Lightweight feature Bi-Directional Texturing for a secure grip, and a hourglass pocket clip that can be mounted on the left or right side in the tip up or tip down position. Specs: Weight: 3.4 ounces Overall Length: 8.75 inches Blade Length: 3.75 inches Blade Steel: S30V Blade Thickness: .125 inches Blade Shape: Modified Drop Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: Teal FRN Lock Type: Back Lock Opening Mechanism: Round Hole Pocket Clip: Reversible, Tip Up/Down Country of Origin: Japan

Spyderco Endura Sprint Run.  Features a unique blade of  V-Toku2 tool steel flanked by SUS410 outer layers.  Blue/Gray FRN Handle.  Drilled and tapped on all four corners for tip-up, tip-down right of left side carry.  5" closed.

Seki City 

Spyderco C10ZFPOR Endura 4 Spyderco Endura 4 Flat Ground  HAP 40 core flanked by SUS410 martensitic stainless Plain Edge blade. Zome Orange handle. Features three-dimensional FRN handles with Volcano grip, nested steel liners and four-way pocket clips. Flat ground blade, and the David Boye dent on the lockback round out this knife.  Clip: Stainless steel Reversible ambidextrous. Edge Type: Plain Edge. Blade Length: 3 7/8". Length Overall: 8 3/4". Seki City. NOTE: As each handle is individually hand crafted with the Zome coloration, each knife will vary slightly in coloration.

Seki City