KNIFE TYPES

Ka-Bar 1219 U.S. Army marked partially serrated fighting knife.

  The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials. Tang stamped U.S. ARMY. U.S. Army stamped leather sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  U.S. ARMY--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--KNIFE MANUFACTURED IN:  United States--SHEATH MANUFACTURED IN:  Mexico--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches

Ka-Bar Original HOBO Knife/Fork and Spoon Set.

Portable fork with bottle opener, knife and spoon with nylon carrying case is designed for on-the-go or outdoor dining. All three utensils slide apart and back together for an all-in-one dining kit. Just toss in a backpack or glove compartment.

SPECIFICATIONS:

--Weight: 5.6 oz

--Overall Length:  6.625"

--Made of 3Cr13 Stainless Steel

--Dishwasher Safe

PRC

The Tom Brown Tracker has been one of the most popular blades produced by TOPS for many years. It is one of the biggest, beefiest multi-tools in existence. Designed by Tom Brown Jr. and featured in the movie "The Hunted". TOPS is proud to present the Tom Brown Tracker in 154cm stainless steel. The Tracker #3 is slightly larger than the Tracker #2 but slightly smaller than the Tracker #1. This design was made for chopping, skinning, carving, gutting, scoring, cutting, slashing, slicing, and just about anything else you would need to do in the wilderness.
SPECIFICATIONS:--Overall Length: 10.75"--Cutting Edge: 5.50"--Blade Thickness: 0.190"--Hardness: RC 58-60 Cryo Treated--Blade Finish: Tumble Finish
--Handle Material: Black Canvas Micarta--Knife Weight: 13.8oz--Weight w/ Sheath: 18.4oz--Sheath Included: Yes--Sheath Material: Black Kydex--Sheath Clip: Rotating Spring Steel--Designer: Tom Brown, Jr.
USA

The Brothers of Bushcraft fixed blade is a solid bet for use around the house, around the field and out in the bush.  You will hard pressed to find a better field knife anywhere.

SPECIFICATIONS:

--Overall Length:  10.00"

--Blade Length:  4.75"

--Cutting Edge:  4.50"

--Blade Thickness:  0.190"

--Blade Steel:  1095 

--Hardness:  RC 56-58

--Blade Finish:  Coyote Tan Coating

--Handle Material:  Green Canvas Micarta

--Knife Weight:  9.6 oz

--Sheath Included:  Yes

--Sheath Material:  Coyote Tan Kydex

--Sheath Clip:  Rotating Spring Steel

USA

Ka-Bar 1266 Modified Tanto Fixed Blade Knife. This fixed blade knife features an 8 inch black finished 1095 Cro-Van plain edge blade. Black Kraton handles. Steel double guard and pommel. Black Injection Molded Nylon sheath. MOLLE compatable. Knife overall length is approx 12 3/4" USA

The Fieldcraft Knife was designed by The Brothers of Bushcraft. The knife is 10 inches long in total, with a blade length of 4 1/2 inches. This makes a compact, but extremely serviceable knife The cutting edge is a modified Scandinavian Grind, which is very effective for carving, skinning and other general woods work. With a rockwell hardness of 56-58, the ease of sharpening is astounding. The handle being made of Red and Black G-10, the handle will never let you down. The "Thumb Scallops", formed on the hilt of the handle offer more comfort and control when using specialized carving and skinning grips. The pommel of the blade is simply the tang of the knife exposed enough to allow impact from a baton to not effect the handle.On the exposed pommel, you will find a scraper specially designed by one of The Brothers of Bushcraft, for striking Ferro rods in a safe and efficient manner.The sheath is a strong, durable Kydex, with a steel belt clip. This arrangement allows a safe, secure and comfortable carry on the belt, pack strap, or even around the neck. With a built in Ferro-rod attachment point. From carving netting needles and trap triggers, to chopping through branches, the TOPS Knives / Brothers of Bushcraft Fieldcraft Knife will do just about any chore that you can throw at her in a wilderness survival scenario.
SPECIFICATIONS:--Overall Length: 10.00"--Blade Length: 4.75"--Cutting Edge: 4.50"--Blade Thickness: 0.190"--Blade Steel: 1095 High Carbon--Hardness: RC 56-58--Blade Type: Drop Point--Blade Grind: Modified Scandinavian (Scandi) Grind--Blade Edge: Plain Edge--Pommel: Extended with Ferro Rod Scraper.
--Lanyard Hole: Yes--Blade Finish: TOPS Black Traction Coating--Handle Material: Red and Black G-10--Knife Weight: 9.6 oz--Sheath Included: Yes
--Sheath Material: Black Kydex With Ferro Rod attachment (Ferro Rod Included]--Sheath Clip: Rotating Spring Steel Country of Origin: USA

TOPS is well-known for making hard-use tactical and survival knives. In recent years however, the lineup of models available through TOPS has opened to a very wide variety of cutlery. Hunting knives, EDC, and even kitchen cutlery. Now TOPS is ready to release their first filet knife.

Finding a middle ground between the flexibility of a filet knife and the rigidity of boning knife, the TOPS Filet is reminiscent of a Japanese gokujo(which means “all-in-one”). It is multipurpose in nature and can be used to bone or filet. The sweeping 154cm blade on the TOPS Filet will make short work of fileting fish and will leave very little waste cleanly trimming meat from bone with precision. The handle is a combination of rubber and G10 that provides a secure grip, which is important when dealing with slippery objects. The OD Green Kydex sheath with a Kydex belt loop will make the TOPS Filet feel equally at home in the field and the kitchen.
SPECIFICATIONS:
--Knife Type: Fixed Blade
--Overall Length: 11.50"
--Blade Length: 8.00"
--Cutting Edge: 7.50"
--Blade Thickness: 0.090"
--Blade Steel: 154cm
--Hardness: RC 58-60 Cryo Treated
--Blade Finish: Tumble Finish
--Handle Material: Tan/Black SureTouch G10
--Knife Weight: 4.2oz
--Weight w/ Sheath: 7.3oz
--Sheath Included: Yes
--Sheath Material: OD Green Kydex
--Sheath Clip: Kydex Belt Loop
--Designer: Leo Espinoza
USA

Originally designed from the Finnish sami knife, used by the Laplanders for all their hunting and bushcraft tasks. These knives have traditionally been flat ground, single or double sided, with a "zero-ground" edge ground to the edge.

It occurred to TOPS that a good idea is still a good idea in a smaller package. The Mini Scandi was a result of the very popular, original Brothers of Bushcraft (BROS-01) knife. It offers all the advantages of a modified Scandi grind in a neck knife, which makes it easily concealable. All of the cutting ability of a larger Scandi that can also fit in your pocket or pack.
SPECIFICATIONS:--Overall Length: 6.13"--Blade Thickness: 0.130"--Hardness: RC 56-58--Blade Finish: Black Traction Coating--Handle Material: Tan Canvas Micarta--Weight w/ Sheath: 3.8oz--Sheath Included: Yes--Sheath Material: Black Kydex--Designer: Leo Espinoza. USA

The Mini Tanimboca Puukko is a great tool for making bushcraft items (utensils, kuksa, baskets, blow guns, etc. are all things that Goran had in mind with this), whittling around the fire, and even accomplishing some EDC uses.
This knife is smaller than most and has no guard (so use caution). The knife can be held close to the cutting edge and in multiple grips. If you like making things with your hands especially in the woods, this knife is going to be a must-have. It has the classic Puukko look, but in a much, much smaller package. The spine is ground to 90 degrees for scraping tasks. Well-rounded Black Canvas Micarta handles make the handle comfortable despite its size. The brown leather sheath is set up for a tip-down neck carry, but also has a loop that will fit most belts.
The Mini Tanimboca Puukko was designed by Goran Mihajlovic, who also designed the original one made by TOPS. Goran is originally from Serbia but grew up in Germany. He has lived in Colombia now for many years. He owns a nature reserve called Tanimboca that houses hundreds if not thousands of species of plant, animal, and insect. Throughout his entire life, he has been a knife user and enthusiast. In recent years he has begun making knives at his forge in the Amazon jungle. He prefers Puukkos for their ability to perform well at large variety of cutting tasks.SPECIFICATIONS:--Overall Length: 4.00"--Blade Thickness: 0.090"--Hardness: RC 56-58--Blade Finish: Tumble Finish--Handle Material: Black Canvas Micarta--Weight w/ Sheath: 2.6oz--Sheath Included: Yes--Sheath Material: Brown Leather. USA

A new update to an old favorite. The Longhorn Bowie is now offered with TOPS' famous Black River Wash. If you've been looking for a traditional style that won't let you down in the field, this is the one. Hunters, campers, and bushcrafters will love the versatility this knife provides, including the finger choil so you can choke up and get small work done too. In self-defense and battle, the Longhorn Bowie delivers. It has a great, ergonomic handle.
You don't have to be a Texan to own one or two of these very impressive knives. The long flowing design is backed up by a solid 1/4" of hard-core 1095 steel. The Longhorn Bowie has shown to be a favorite for all field types. A long time proven design with fine execution by TOPS.
* Please Note That The "Black River Wash" Process Will Create A Unique Look To Each Knife. Your Knife's Pattern May Vary From The Product Image. The Carbon Content Of The Steel Can Also Cause Variations In The Engraving.
SPECIFICATIONS:--Overall Length: 13.00"--Blade Thickness: 0.250"--Hardness: RC 56-58--Blade Finish: Black River Wash--Handle Material: Black Linen Micarta--Weight w/ Sheath: 23.4 oz--Sheath Weight: 5.3 oz--Sheath Included: Yes--Sheath Material: Black Ballistic Nylon--Sheath Clip: Molle Backing. USA