KNIFE TYPES

Features a 7" black phosphate coated plain edge blade of 1095 carbon steel, and a tan canvas Micarta handle. Comes complete with a MOLLE compatable nylon sheath with hard shell insert. Overall length of 12 1/4 in.
USA

Spyderco C36GPE Military Plain Edge.

The Spyderco Military is one of Spyderco's most popular patterns.

--Blade Steel S30V 

--Blade Grind:  Flat

--Blade Thickness 5/32" 4mm 

--Diameter Blade Hole 9/16" 14mm

--Edge Type:   Plain Edge 

--Handle Material:  Black G-10 

--Pocket Clip:  Stainless - Right side tip-down.

--Lock:  Linerlock

--Length Blade 4" 102mm 

--Length Closed 5 1/2" 139mm 

--Length Overall 9 1/2" 242mm 

--Weight 4oz 113g

USA

Spyderco Military Black G-10 with Black Plain Edge blade. Blade Steel S30V Blade Thickness 5/32" 4mm Diam. Blade Hole 9/16" 14mm Edge Type PlainEdge Handle Material G-10 Length Blade 4" 102mm Length Closed 5 1/2" 139mm Length Overall 9 1/2" 242mm Weight 4oz 113g

From Ka-Bar, the Becker Campanion Plain Edge Fixed Blade.  5" black plain edge blade of 1/4" thick stock.  Full tang construction.  10 1/2" overall.  Black nylon sheath with hardshell insert.

Knife made in USA

Ka-Bar 1219 U.S. Army marked partially serrated fighting knife.

  The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials. Tang stamped U.S. ARMY. U.S. Army stamped leather sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  U.S. ARMY--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--KNIFE MANUFACTURED IN:  United States--SHEATH MANUFACTURED IN:  Mexico--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches

Emerson SARK BTS Search and Rescue Knife - Black Partially Serrated Blade

NOTE:  New old stock direct from Emerson.  Found in back room.  Individually serial numbered - blade dated 2011.

  The Emerson SARK Model is just one of the Search and Rescue Knife Models that we offer. Featuring a blunted blade tip to avoid piercing skin or other sensitive materials. When the U.S. Navy needed a rescue knife they came directly to Emerson. The SARK knife was designed specifically for emergency use situations where safety and effectiveness are equally important. This is an official issue rescue knife to the elite U.S. Navy Rescue Teams. It was designed according to their parameters, field tested in actual emergency conditions, and chosen just as you see it here.

SPECIFICATIONS:--Handles:  G-10--Lock:  Titanium--Pocket Clip:  Black Stainless Tip Up--Blade: 154CM--Finish:  Black--Grind:  Chisel Grind--Edge:  Partially Serrated--WAVE Feature--Thumb Disc--Overall Length:  8.2"--Blade Length:  3.5"--Blade Hardness:  57-59 RC--Weight:  4 oz.

Made in USA

Emerson SARK BT Search and Rescue Knife - Black Plain Edge Blade.

NOTE:  New old stock direct from Emerson.  Found in back room.  Individually serial numbered - blade dated 2011.

  The Emerson SARK Model is just one of the Search and Rescue Knife Models that we offer. Featuring a blunted blade tip to avoid piercing skin or other sensitive materials. When the U.S. Navy needed a rescue knife they came directly to Emerson. The SARK knife was designed specifically for emergency use situations where safety and effectiveness are equally important. This is an official issue rescue knife to the elite U.S. Navy Rescue Teams. It was designed according to their parameters, field tested in actual emergency conditions, and chosen just as you see it here.

SPECIFICATIONS:--Handles:  G-10--Lock:  Titanium--Pocket Clip:  Black Stainless Tip Up--Blade:  154CM--Finish:  Black--Grind:  Chisel Grind--Edge:  Plain Edge--WAVE feature--Thumb disc--Overall Length:  8.2"--Blade Length:  3.5"--Blade Hardness:  57-59 RC--Weight:  4 oz.

Made in USA

Kershaw 2060 Noventa.

  The Noventa's stylish design takes inspiration from the Art Deco period. Aesthetically, it features a two-tone blade, standout handle texturing, and a custom pivot. Sleeker still, the hidden flipper creates an uninterrupted profile that’s still easy to open and operate. Even the deep-carry reversible pocket clip doesn’t have visible screws. They’re hidden in the backspacer for a clean look. The Noventa also takes advantage of D2 tool steel for a long-lasting edge and opens smoothly with KVT ball bearing washers. With an eye-catching and sharp design, the Noventa is the ideal everyday carry.

SPECIFICATIONS:--Blade Length:  3.3 in. (8.4 cm)--Blade Material:  D2--Blade Finish/Coating:  Black-oxide coating, satin flats--Blade Thickness:  0.105 in. (2.7 mm)--Closed Length:  4.55 in. (11.6 cm)--Handle Material:  Stainless steel--Handle Finish/Coating:  Stonewashed finish, black-oxide coating--Handle Thickness:  0.42 in. (10.7 mm)--Overall Length:  7.75 in. (19.7 cm)--Weight:  4 oz. (113 g)

PRC

ESEE 5PDT-004 Fixed Blade Knife. Desert Tan plain edge drop point blade with 3D Blood Red/Black G-10 handle scales.
Designed by SERE instructors for downed pilots, then ESEE-5 series is a serious no-nosense survival tool you should not be without. Folks, this is a beast! Comes with ESEE's lifetime warranty.
SPECIFICATIONS AND FEATURES--Blade Finish: Desert Tan Powder Coat--Blade Grind: Flat Saber--Blade Shape: Drop Point--Blade Edge: Plain Edge--Hardness: 55-57RC--Handle: 3D Blood Red/Black G-10--Pommel: Original (sharpened)--Construction: Full Tang--Blade Length: 5 1/2"--Cutting Edge: 5 3/8"--Max Blade Thickness: 0.258"--Overall Length: 11"--Handle Length: 5 1/2"--Handle Thickness: 0.765"--Lanyard Hole: Yes--Weight: 16 oz (Knife Only)--Sheath: Molded Hardshell - Black - Clip Plate - Paracord - Cord Lock - Sheath MOLLE Lock compatable (MOLLE Locks sold separately)
Country of Origin: USA
**ESEE knives are made from 1095 High Carbon Steel. While 1095 is a top choice for professional cutlery designed for hard use, it will rust and stain if not properly cared for, especially on the cutting edge and around the laser engraving. It is the user's responsibility to keep the blades properly lubricated and cleaned. ESEE Knives suggest using a dry film rust inhibitor such as Tuf-Glide or Tuf-Cloth. We use it here in the store and at home. Great stuff