Your browser does not support JavaScript or You have disabled it. Most of the features will not work so please enable JavaScript!

KNIFE TYPES

Active filters

  • Knife Weight: 3.60 oz
  • Knife Weight: 9.60 oz
  • Knife Weight: 11.20 oz
  • Marilla Flipper Framelock -...

    $163.99

    Case XX Marilla Flipper.
    Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Marilla.
    This version features a plain edge Drop Point blade of Premium S35VN Stainless Steel that rides on a smooth ball-bearing pivot. The Handle is Green Anodized Aluminum with Black G-10 Inlay that stands proud for a more secure grip. One handed Flip-open design with a finger flipper. Super strong framelock for security when using the Marilla for heavy chores. Reversable Deep Carry pocket clip.
    --Closed Length: 4.75"
    --Weight: 3.6 oz
    Made in the USA at the Case Factory

    Last items in stock
  • Steelhead Fillet Knife

    $22.97
    Schrade Uncle Henry Steelhead Fillet Knife. Features a 7.5" fillet blade of 400 series stainless steel. 4.8" Staglon handle. Leather belt sheath. Imported.
    Last items in stock
  • Ka-Bar U.S. Army Fighting...

    $96.90

    Ka-Bar 1219 U.S. Army marked partially serrated fighting knife.

      The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials. Tang stamped U.S. ARMY. U.S. Army stamped leather sheath included.

    SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  U.S. ARMY--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--KNIFE MANUFACTURED IN:  United States--SHEATH MANUFACTURED IN:  Mexico--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches

    Last items in stock
  • Kinzua Flipper - S35VN...

    $144.99

    Case XX 64662 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Black Anodized Aluminum Handles..
    Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.
    This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Black Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.
    --Closed Length: 4.75"
    Made in the USA at the Case Factory!

    Last items in stock
  • Schrade Pro Hunter

    $34.97
    The Schrade Uncle Henry Pro Hunter features a 3 1/2" hollow ground plain edge blade of 400 series stainless steel. Full tang construction. Brass guard and pins. Lanyard hole with leather thong. Contoured Stagalon composite handles for durability. Fitted leather sheath. Imported.
    Last items in stock
  • Kinzua Flipper - S35VN...

    $144.99

    Case XX 64659 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Green Anodized Aluminum Handles..

    Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.

    This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Green Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.

    --Closed Length: 4.75"

    --Weight: 3.6 oz

    Made in the USA at the Case Factory

    Out of Stock
  • Kinzua Flipper Green Tanto

    $144.99

    Case XX Kinzua Flipper.  

      Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.

      This version features a plain edge Tanto blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot.  The Handle is sleek Green Anodized Aluminum. One  handed Flip-open design with a finger flipper.  Super strong framelock with steel insert for security when using the Kinzua for heavy chores.  Reversable Deep Carry pocket clip.  

    --Closed Length:  4.75"

    --Weight:  3.6 oz

    Made in the USA at the Case Factory!

    Out of Stock
  • TOPS Brothers Of Bushcraft...

    $159.97

    The Fieldcraft Knife was designed by The Brothers of Bushcraft. The knife is 10 inches long in total, with a blade length of 4 1/2 inches. This makes a compact, but extremely serviceable knife The cutting edge is a modified Scandinavian Grind, which is very effective for carving, skinning and other general woods work. With a rockwell hardness of 56-58, the ease of sharpening is astounding. The handle being made of Red and Black G-10, the handle will never let you down. The "Thumb Scallops", formed on the hilt of the handle offer more comfort and control when using specialized carving and skinning grips. The pommel of the blade is simply the tang of the knife exposed enough to allow impact from a baton to not effect the handle.On the exposed pommel, you will find a scraper specially designed by one of The Brothers of Bushcraft, for striking Ferro rods in a safe and efficient manner.The sheath is a strong, durable Kydex, with a steel belt clip. This arrangement allows a safe, secure and comfortable carry on the belt, pack strap, or even around the neck. With a built in Ferro-rod attachment point. From carving netting needles and trap triggers, to chopping through branches, the TOPS Knives / Brothers of Bushcraft Fieldcraft Knife will do just about any chore that you can throw at her in a wilderness survival scenario.
    SPECIFICATIONS:--Overall Length: 10.00"--Blade Length: 4.75"--Cutting Edge: 4.50"--Blade Thickness: 0.190"--Blade Steel: 1095 High Carbon--Hardness: RC 56-58--Blade Type: Drop Point--Blade Grind: Modified Scandinavian (Scandi) Grind--Blade Edge: Plain Edge--Pommel: Extended with Ferro Rod Scraper.
    --Lanyard Hole: Yes--Blade Finish: TOPS Black Traction Coating--Handle Material: Red and Black G-10--Knife Weight: 9.6 oz--Sheath Included: Yes
    --Sheath Material: Black Kydex With Ferro Rod attachment (Ferro Rod Included]--Sheath Clip: Rotating Spring Steel Country of Origin: USA

    Out of Stock
  • Hookset 6" Saltwater Cleaver

    $25.95

    The Buck 150BLS Hookset 6" Saltwater Cleaver features a sturdy 6" gray Titanium coated 5Cr15MoV Stainless blade. Blue and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
    Injection molded plastic sheath with integral belt loop and drain hole.
    PRC

    Out of Stock
  • Kinzua Flipper - S35VN...

    $144.99

    Case XX 64661 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Red Anodized Aluminum Handles..
    Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.
    This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Red Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.
    --Closed Length: 4.75"
    Made in the USA at the Case Factory

    Out of Stock
  • Kinzua Flipper - S35VN...

    $144.99

    Case XX 64660 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Blue Anodized Aluminum Handles..
    Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.
    This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Blue Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.
    --Closed Length: 4.75"
    Made in the USA at the Case Factory

    Out of Stock
  • Spyderco Respect Bowie

    $462.00
    Spyderco founder Sal Glesser has always liked Bowie knives, and he designed the Respect Bowie to pay tribute to the classic American Bowie Knife. Though the design is classic, with it's full guard and clip point blade, it has been constructed using modern materials. The blade of the Respect Bowie is crafted from CPM 154 stainless steel. The blade is an impressive .300 inch think at the spine and ricasso, but is flat ground over its entire 1.5 inch width to ensure an edge that can handle fine cutting tasks. The unsharpened swedge on the spine of the knife guarantees an acute point and exceptional piercing ability. The Respect's guard is machined from stainless steel and then press fit to the tang and shoulder of the blade. The guard is then secured with contoured G-10 scales that have machined cavitites to completely envelop the hidden tang. These scales are then secured with stainless steel Torx fasteners to achieve an one piece handle feel that highlights the ergonomics of the handle. In a nod to tradition, the Respect ships with a high quality, hand crafted leather sheath. The sheath features a conventional belt loop along with a brass stud, which not only secures the leather retaining strap but also prevents the sheath from slipping down when worn inside the waistband. Specs: Weight: 11.2 ounces Overall Length: 13.15" Blade Length: 7.94" Blade Steel: CPM 154 Blade Thickness: 0.300" Blade Shape: Clip Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: G-10 Sheath: Leather with Belt Loop Country of Origin: USA
    Out of Stock
  • Kinzua Flipper Black

    $144.99

    Case XX Kinzua Flipper. Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua. This version features a plain edge Tanto blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Black Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock for security when using the Marilla for heavy chores. Reversable Deep Carry pocket clip. --Closed Length: 4.75" --Weight: 3.6 oz Made in the USA at the Case Factory!

    Out of Stock
  • Kinzua Flipper Red

    $144.99
    ON ORDER WITH THE CASE FACTORY. CLICK THE NOTIFY ME BUTTON TO BE NOTIFIED WHEN THESE ARE AVAILABLE. Case XX Kinzua Flipper. Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua. This version features a plain edge Tanto blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Red Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock for security when using the Marilla for heavy chores. Reversable Deep Carry pocket clip. --Closed Length: 4.75" --Weight: 3.6 oz Made in the USA at the Case Factory!
    Out of Stock
  • Kinzua Flipper Blue

    $144.99
    ON ORDER WITH THE CASE FACTORY. CLICK THE NOTIFY ME BUTTON TO BE NOTIFIED WHEN THESE ARE AVAILABLE. Case XX Kinzua Flipper. Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua. This version features a plain edge Tanto blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Blue Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock for security when using the Marilla for heavy chores. Reversable Deep Carry pocket clip. --Closed Length: 4.75" --Weight: 3.6 oz Made in the USA at the Case Factory!
    Out of Stock
  • Marilla Flipper Blue

    $163.99
    Case XX Marilla Flipper. Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Marilla. This version features a plain edge Drop Point blade of Premium S35VN Stainless Steel that rides on a smooth ball-bearing pivot. The Handle is Blue Anodized Aluminum with Black G-10 Inlay that stands proud for a more secure grip. One handed Flip-open design with a finger flipper. Super strong framelock for security when using the Marilla for heavy chores. Reversable Deep Carry pocket clip. --Closed Length: 4.75" --Weight: 3.6 oz Made in the USA at the Case Factory!
    Out of Stock