Filter By

Blade Steel

Blade Steel

Blade Length

Blade Length

Knife Weight

Knife Weight

Brand

Brand

Price

Price

  • $16.00 - $385.00

Tactical Knives

Active filters

  • Brand: Boker
  • Brand: Cold Steel
  • Brand: Spyderco
  • Karahawk G-10 Black PE

    $279.75

    Spyderco C170GBBKP Karahawk The Spyderco Karahawk is a modern folding version of the Southeast Asia Karambit fighting knife. Features a Saber-ground VG-10 plain edge Karambit Hawkbill blade with Non-reflective TiCN coating on both the blade and all hardware. Features both the Trademarked Spyderco Round Hole and the Emerson WAVE feature. G-10 reinforced signature ring allows to traditional Karambit techniques. Blade length: 2 1/3" Closed length: 4 1/2" Seki

    In Stock
  • Police 4 Lightweight K390...

    $175.70
    The Police 4 is the largest member of Spyderco's select family of lightweight knives featuring K390 MICROCLEAN tool steel blades. Ideal for extreme cutting challenges, it combines the toughness and superior edge-holding characteristics of K390 with all the proven qualities of this highly refined design -- including the low-friction edge geometry of a full-flat-ground blade, a fully accessible Trademark Round Hole, a high-strength back lock mechanism, and a four-position pocket clip. Specs: Blade Length: 4.38" Overall Length: 9.97" Weight: 4.2oz Blade Steel: K390 Blade Grind: Full Flat Pocket Clip: 4 Position Handle: Blue FRN Lock Type: Back Lock Country of Origin: Japan
    In Stock
  • A-F T2 Training Knives

    $16.45
    Official Applegate-Fairbairn neoprene training knives can be chalked to verify "scores" on opponent. 11 3/8" overall. Set of two.
    In Stock
  • Pilot Knife

    $79.97

    The impressive Pilot Knife from US knifemaker Dave Wenger is a fully-grown outdoor and survival knife with a tactical orientation. The massive D2 blade is extremely edge-resistant, robust and also has an abrasion-resistant powder coating. The military character of this fixed blade is underlined by the groove on both sides and the distinctive sawback. The ergonomic G10 handle scales promise a comfortable grip and a secure hold in any situation. Decorative hollow brass studs help to save weight and can also be used as a lanyard hole. Supplied with a custom-fit Kydex sheath and a belt clip.

    SPECIFICATIONS:--Blade Length: 5.51"--Overall Length: 10.24"--Blade Material: D2 Tool Steel--Blade Thickness: 0.20"--Blade Style: Sawback Clip Point--Blade Finish: Black Powder Coating--Handle Material: Black G10 with Hollow Brass Studs--Handle Thickness: 0.79--Sheath Material: Black Kydex--Designer: Dave Wenger--Weight: 9.3 oz.  PRC

    Last items in stock
  • Szabo Warrior Hawk D2

    $412.50
    This Laci Szabo designed Spyderco Warrior Hawk features a single piece body of durable D2 tool steel finished with a black titanium carbonitride (TiCN) coating. The head is compound ground with a spike on the back of the head. Machined black G-10 handles provide a sound and secure grip. There is also incorporated into the handle a stout pry tip. Comes with a custom-molded Boltaron carry sheath and arrives packaged in a padded zipper pouch. Tiawan
    Last items in stock
  • Yojimbo 2 Black BLK Blade PE

    $232.50
    This Michael Janich Design Yojimbo features a 3 1/4" matte black DLC coated plain edge blade of CPM S30V stainless steel. Compression lock. Back G-10 handles. BlackStainless pocket clip. Drilled and tapped on all four corners for tip-up, tip down left or right side carry. All black hardware. 4 1/2" closed. USA
    Last items in stock
  • Matriarch 2 Blk/Bk SE Waved

    $145.50
    Spyderco C12BBK2W Spyderco Matriarch 2 Serrated with Emerson Wave feature. Fully serrated agressive reverse "S" blade shape. Black VG-10 blade steel. Emerson Opener. Hollow Grind Black bi-directional FRN handles with four position Ambidextrous Clip. Dual skeletonized nested liners. Lockback design with Boye dent. Blade length: 3 1/2". Closed length: 5" Seki City
    Last items in stock
  • Spyderco Police, PE

    $172.50
    Spyderco C07P Stainless Police Plain Edge The C07P is a tough heavy-duty work knife that is strong and durable. SPECIFICATIONS: --Blade Steel: VG-10 --Blade Thickness: 1/8" 3mm --Clip: Stainless Steel --Diam. Blade Hole: 15/32" 12mm --Edge Type: Plain Edge. --Handle Material: Stainless Steel --Blade Hardness: 59-60 --Length Blade: 4 1/8" (104mm) --Length Closed: 5 5/16" (135mm) --Length Cutting Edge: 3 13/16" (97mm) --Length Overall: 9 7/16" (240mm) --Weight: 5.5oz (155g) Seki City
    Last items in stock
  • Recon 1 Tanto PE

    $119.97
    Cold Steel 27BS Recon 1 Tanto Plain Edge. A popular knife with Military and Law Enforcement Personnel, Fire and Rescue crews as well as civilians who appreciate a hardworking, dependable tool for any occasion. Sharp as a scalpel and tough as a tank, the Recon Series is available with 2 and 4 inch blades, and every facet of their construction has been over engineered to make them as strong, durable and effective as humanly possible. These Cold Steel classics are thin, light, razor sharp and amazingly strong! Both models in this diverse series feature our world renowned Tri-Ad lock®, making them almost impervious to shock and keeping your precious fingers safe from harm when using your knife in even the most taxing conditions. From the sturdy little workhorse that is the Micro series to the beastly cutting power of our classic Recon series- whatever your mission, the Recon I is there for you! SPECIFICATIONS: --WEIGHT: 5.2 oz. --THICKNESS: 3.5mm --BLADE LENGTH: 4" --HANDLE LENGTH: 5 3/8" --HANDLE/MATERIAL: Textured Black G-10 --STEEL / MATERIAL: American S35VN Stainless with DLC Coating --OVERALL: 9 3/8" --ADDITIONAL FEATURES - --Pocket clips for right or left side tip-up carry. ---Dual Thumbstuds ---Tri-Ad Lock System ---All black hardware --Country of Origin: Taiwan
    Last items in stock
  • Talwar S35VN SE

    $189.97
    The Talwar is a BIG folding lockback - but with it's extra wide blade, thin V shaped cross section, upswept blade tip and premium S35VN serrated edge blade it is a contender for for best folding knife. SPECIFICATIONS: --Weight: 8.6 oz --Blade Thickness: 3.8mm --Handle Length/Material: 7 3/8in Long G-10Handle --Blade Steel: S35VN Steel --Blade Length: 5 1/2in --Blade Edge: Serrated --Lock: Tri-Ad --Overall Length: 12 7/8in Taiwan
    Last items in stock
  • Hold Out 6" S35VN Plain Edge

    $199.97

    Big, stout, flat grind, Tri-Ad Lock symmetry...keystones of the Hold Out.  Now sporting S35VN premium blade steel.  If you are looking for a big folder - this is it!

    SPECIFICATIONS:

    --Weight: 7 oz 

    --Blade Thickness: 3.8mm 

    --Handle Length/Material: 7 3/16in Long G-10Handle 

    --Removable/reversable stainless pocket clip for tip-up carry.

    --Blade Steel: S35VN Steel

    --Blade Edge:  Plain Edge

    --Thumbstud

    --Tri-ad Lock 

    --Blade Length: 6in 

    --Overall Length: 13 3/16in

    Taiwan

    Last items in stock
  • Hold Out 3" S35VN Plain Edge

    $99.97

    A smaller version of the large Holdout, this smaller Hold Out is has a small size but is still stout with a  flat grind blade , Tri-Ad Lock and symmetry...keystones of the Hold Out.  Now sporting S35VN premium blade steel.  If you are looking for a solid folder - this is it!

    SPECIFICATIONS:

    --Weight: 3 oz 

    --Blade Thickness: 3.5mm 

    --Handle Length/Material: 5in Long G-10 Handle 

    --Removable/reversable stainless pocket clip for tip-up carry.

    --Blade Steel: S35VN Steel

    --Blade Edge:  Plain Edge

    --Thumbstud

    --Tri-ad Lock 

    --Blade Length: 3in 

    --Overall Length: 7in

    Taiwan

    Last items in stock
  • Cop Tool

    $79.97

    Finally, a deployment tool that easily covers the entire range of tasks in duty, service, hobby and leisure. Developed and field tested by Roy Huntington, a police officer with more than twenty years of experience. Now Wilson Tactical and Boker begin an exclusive collaboration to make this perfect tool available for a reasonable price point. The Cop Tool can be used as a lever, chisel, belt cutter, scraping tool, or as a multifunctional knife. Small, compact, and extremely effective. The matte gray bead blasted blade is made of high performance 440C stainless steel. For the perfect grip, even with gloves or wet hands, Boker uses a textured G-10 for the handle, which eliminates any danger of slipping. The sheath can be carried discreetly in the waistband, or fits well on any gear belt next to other mission tools. The Boker Plus Cop Tool comes complete with lanyard, black kydex sheath and a Boker Kydex belt clip.  The perfect everyday companion. Overall length: 6". Blade length: 1¾". Weight: 4.2 oz.

    Presentation box..

    PRC

    Last items in stock
  • Recon Scout 3V

    $299.97

    Cold Steel 37RS Recon Scout fixed blade with 3V blade steel.
    The classic Cold Steel Recon Scout now with premium CPM-3V blade steel. Thick blade stock for undeniable strength. Black Kray-Ex handle fot exceptional grip in all conditions. Stainless double Guard. Flat ground blade with swedge.
    Black hardshell Secure-Ex sheath.
    SPECIFICATIONS:--Blade Thickness: 5/16in--Handle Length/Material: 5in Long Kray-Ex--Overall Length: 12 1/2in Taiwan

    Last items in stock
  • Nightstick Boot Knife

    $252.00
    Spyderco FB47GP Nightstick Boot Knife with CPM S30V Blade Steel and polished Black G-10 handle scales. Designed by Gayle Bradley, the Nightstick is a classic bootknife with clean thin lines. The Nightstick features a single edge flat ground satin finished dagger blade of CPM S30V Stainless. Polished Black G-10 handle scales over a full tang construction give the Nightstick a solid feel in the hand. An adjustable Black Boltaron Sheath with Clip provides versitility in carry. SPECIFICATIONS: --Blade Steel: CPM S30V Stainless. --Blade Edge: Plain edge (only one edge sharpened) --Blade Finish: Satin --Handle Material: Polished Black G-10 --Full Tang Construction. --Blade Length: 4 1/8" --Overall Length: 8 3/8" Taichung
    Last items in stock
  • Matriarch 2 Black SE

    $118.13
    Spyderco C12SBK2 Matriarch The Matriarch 2 features Black Bi-Directionally Textured FRN handles. 3 1/2" reverse "S" fully serrated blade of VG-10 Stainless Steel. Black stainless steel pocket clip reversable for right or left side tip-up or tip-down carry. 4 7/8" closed. Seki City
    Last items in stock