KNIVES
Active filters
-
Blackjack 7 Natural Micarta
$288.97Blackjack Model 7 Natural Canvas Micarta handle with pommel. Features a 7 inch A2 Tool Steel Convex ground steel blade. Natural Canvas Micarta handle. Aluminum guard and Pommel. Handmade leather sheath. 12 1/4" overall length. USA Note: A2 tool steel is NOT a stainless steel. While considered by many to be a superior steel for field knives it will tarnish and rust. Use appropriate care. -
Blackjack 7 Stacked Leather
$299.97Blackjack Model 7 Stacked Leather. Features a 7 inch A-2 Tool Steel Convex ground steel blade. Leather stacked handle. Handmade leather sheath. 12 1/4" overall length.. USA A2 is a high carbon steel. While considered by many to be a superior hard use steel it is prone to discoloration, tarnish and rust. Use appropriate care. -
Model 1 Tomahawk Coyote
$189.00American Tomahawk Model 1 ACT810713 ATC-Hickory1-Coy Coyote Brown with Hickory Handle. Features a 1060 High Carbon Steel Head powder coated Coyote Brown that is heat treated to HCR 56. Genuine Coyote Brown finished Tennesse Hickory Handle. --Full Handle Length: 14 1/8" --Full Head Length: 8" --Blade Edge Length: 2 1/2" --Spike Length: 2 1/4" --Weight: 20 oz w/o sheath -- Bottom Eject Low Ride Black Kydex Sheath that includes low ride MOC straps for belt carry. Made in USA
-
Spartan George Raider Dagger
$99.97The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II. This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.
SPECIFICATIONS:
--Overall Length: 12"
--Blade Length: 7"
--Blade Thickness: 3/16"
--Blade Steel: SK5
--Blade Hardness: 58-60 HRC
--Blade Style: Fixed double edge dagger symmetrical blade
--Coating: Black Powder Coat
--Sheath: Black Plastic injection molded Sheath with nylon hanger
--Weight: 0.444 LBS (Knife)
Taiwan --Be advised, some jurisdictions have restrictions on double edge blades. Be sure of your laws as they apply.
-
Ka-Bar U.S.M.C Fighting...
$89.50Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.
The most famous fixed blade knife in the World. The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC. Hard plastic MOLLE compatible sheath included.
SPECIFICATIONS:--WEIGHT: 0.7 lb--BLADE LENGTH: 7 inches--OVERALL LENGTH: 11.875 inches--EDGE ANGLES: 20 Degrees--SHAPE: Clip Point--TANG STAMP: USMC--NSN: 1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Stacked Leather--ROCKWELL HARDNESS: 56-58--BUTT CAP/GUARD: 12GA Commercial Grade Carbon Steel--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 1.188 inches--KNIFE: USA --SHEATH: Taiwan
-
Next Gen - A2 Steel -...
$171.00LT Wright Next Gen Fixed Blade field knife. This Next Gen features a 3 1/4" flat ground blade of A2 steel. Matte Red and Black Linen Micarta handle scales. 7 1/2" Overall. Premium quality leather pouch style belt sheath.
USA
-
Santoku PE Black
$76.50The Spyderco Kitchen Knife Series has been resurrected utilizing their original MBS-26 blade steel. This Santoku Japanese butcher's knife features a thin, flat ground straight edge MBS-26 stainless blade. The steel was chosen specifically by Spyderco for kitchen use as it has proven edge retention, sharpness and excellent cutting performance. A comfortable black Sermollan handle is affixed and has both vertical and horizontal channels for a positive grip. Blade length: ~7". Overall length: 12" Seki City -
Old Hickory 7"" Butcher Knife
$15.97Old Hickory 7" Kitchen Butcher Knife.
First introduced in 1924, the Old Hickory® knives are the most venerable product line still in active production. The Old Hickory® knives feature a hardwood handle secured with brass compression rivets to 1075 carbon steel blades that are both very sharp and capable of retaining an edge better than most stainless knives. Proudly manufactured with artisan processes for over 90 years, Old Hickory® has stood the test of time and is proven to be the best carbon steel kitchen cutlery sold today.
USE & CARE
Please note that the Old Hickory knives are made with carbon steel. We have been making Old Hickory since the early 1900's. Carbon steel knives require extra care to prevent rusting and oxidation of the surface. Old Hickory should not be placed in a dishwasher or allowed to soak in a sink. We recommend cleaning the blade with a damp sponge or cloth and dry thoroughly. Some people go a step further and apply a light coating of vegetable oil to the blades surface. If your blade shows signs of rust, use some steel wool to remove it and then apply some oil to the blade. To keep the blade razor sharp, use a honing steel, sometimes referred to as sharpening steel, or sharpening stick. After years of use, the steel blade will develop a patina, a darkening which is desirable and an indication of its age. Old Hickory knives are durable and affordable, but do require special care.
USA
-
Old Hickory Cleaver
$22.97Old Hickory 7" Kitchen Cleaver
First introduced in 1924, the Old Hickory® knives are the most venerable product line still in active production. The Old Hickory® knives feature a hardwood handle secured with brass compression rivets to 1075 carbon steel blades that are both very sharp and capable of retaining an edge better than most stainless knives. Proudly manufactured with artisan processes for over 90 years, Old Hickory® has stood the test of time and is proven to be the best carbon steel kitchen cutlery sold today.
USE & CARE
Please note that the Old Hickory knives are made with carbon steel. We have been making Old Hickory since the early 1900's. Carbon steel knives require extra care to prevent rusting and oxidation of the surface. Old Hickory should not be placed in a dishwasher or allowed to soak in a sink. We recommend cleaning the blade with a damp sponge or cloth and dry thoroughly. Some people go a step further and apply a light coating of vegetable oil to the blades surface. If your blade shows signs of rust, use some steel wool to remove it and then apply some oil to the blade. To keep the blade razor sharp, use a honing steel, sometimes referred to as sharpening steel, or sharpening stick. After years of use, the steel blade will develop a patina, a darkening which is desirable and an indication of its age. Old Hickory knives are durable and affordable, but do require special care.
USA
-
Old Hickory HOP Knife
$13.97Old Hickory 7" HOP knife features high carbon steel blade. Full tang construction. Genuine hickory handle. 11 3/4" overall. Made by Ontario Knife Company USA. NOTE: Old Hickory knives are produced from the finest High Carbon Cutlery Steel. For best results, hand wash and dry completely to prevent rusting. With continued use, blade may tarnish - your guarantee of Genuine High Carbon Steel. Tarnishing will NOT affect the blade's cutting efficiency. -
Ka-Bar U.S.M.C Fighting Knife
$99.97Ka-Bar U.S.M.C Fighting Knife The most famous fixed blade knife in the World - "the KA-BAR" - was designed to serve our troops during World War II and is still doing its job, with honors, more than 50 years later. 1095 carbon steel blade, epoxy powder coated. Stacked leather handle Blade length 7", overall length 11 7/8" 0.68 lbs (blade only) with U.S.M.C. tang stamp. Brown leather USMC embossed sheath included. Knife USA -
Franklin Trout and Bird Knife
$195.00Mike Franklin Custom Trout and Bird knife. Rich brown hardwood laminated handle scales. Satin finished stainless steel drop point blade etched "FRANKLIN MADE - S A H-008 2-93". Holes on the rear of the handle help balance this knife out. Jimping on index area and spine. High polished Stainless steel handle rivets. Lanyard hole. Wonderfully styled knife made by Mike Franklin. Comes with a quality leather clip-on sheath hand-autographed personally by Mike Franklin FEATURES AND SPECIFICATIONS: --Blade Steel: ATS-34 Stainless --Blade Style: Drop Point --Blade Grind: Flat Grind --Blade Finiish: Satin --Edge Type: Plain Edge --Handle Material: Full figured Wood laminate over full tang construction --Lanyard Hole: Yes --Pocket Clip: N/A - Leather sheath signed by maker --Frame/Liner: Full tang construction --Action: Fixed Blade --Brand: Mike Franklin Custom --Model Name: Bird and Trout --Use: Field - everyday Carry (EDC) --Blade Thickness: 0.91" --Cutting Edge: 2 9/16" --Blade Length: 3 1/4" --Handle Length: 3 1/16 " --Overall Length: 6 1/4" --Handle Thickness: 0.44" Other Features: --Full Tang Construction --Substantial jimping on spine and finger choil --Polished Stainless Steel Torx Screws in handle. Country of Origin: USA While this knife and sheath are near mint, be aware we obtained this piece from a collector. Please consider it used. -
Recon Tanto SK-5
$49.97Cold Steel 49LRT Recon Tanto SK-5 Over the last 34 years, Cold Steel has succeeded in establishing the Tanto as a superior blade for combative application. Their pioneering research, development and refinement of this blade shape has proven the value of the "American Tanto" style reinforced point beyond question. The Recon Tanto continues to redefine the standard for combat knives around the globe. Having seen active military application in numerous conflicts over the last 20 years, it is well on its way to becoming the preferred fixed blade for special military units and even SWAT teams on our own soil. Experience the extraordinary quality - test the distinctive razor sharp edge for yourself and you will see why the Recon Tanto is a knife you can't afford to be without! SPECIFICATIONS: --Weight: 9oz --Blade Thickness: 5mm Blade --Length: 7" --Blade Steel: SK-5 w/ Black Tuff-Ex Finish --Handle Length/Material: 4-3/4" Kray-Ex --Overall Length: 11-3/4" --Additional Features: Secure-Ex® Sheath Taiwan
-
Leatherneck Tanto Power Coat
$71.99Cold Steel 39LSFCT Leatherneck Tanto with Power Coat Finish. The Cold Steel Leatherneck Series is comprised of two distinct and iconic blade styles, both of which have proven to be exceptionally popular with our brothers and sisters in the armed forces: The Leatherneck-SF (for Semper-Fi) has a beautiful hand honed saber ground clip point blade, and the Leatherneck Tanto features the signature Cold Steel 'American Tanto' blade with a stout reinforced tip for extra strength. Both are made from tough D2 Tool Steel with a non-reflective black powder coat finish. To keep the users fingers from sliding forward onto their keen edge, the Leathernecks come with a solid steel double quillon guard. The handles are made of deeply checkered Kray-Ex that totally encompasses the Leathernecks extra wide, full tang. The Leathernecks handle is capped with a thick, machined steel butt cap (not cheap casting or plastic like some others on the market) so they can even double as a hammer in an emergency! To carry the Leatherneck knives safely and conveniently, each blade comes complete with a sturdy and versatile military style Secure-Ex® sheath with fully detachable and ambidextrous belt loop. SPECIFICATIONS: --WEIGHT: 12.2 oz. --BLADE THICKNESS: 5mm --BLADE LENGTH: 7" --HANDLE LENGTH: 5" --HANDLE MATERIAL: Griv-Ex --STEEL / MATERIAL: German D2 Steel with Black Powder Coating --OVERALL: 12" Includes Secure-Ex® Sheath Country of Origin: Taiwan -
Safe Maker II
$34.97CALL TO ORDER. DUE TO PAYPAL RESTRICTIONS PAYPAL NOT ACCEPTED FOR THIS ITEM
Cold Steel 12DCST Safe Maker II. Cold Steel has been making push knives for over a quarter century. Over the years they have continually refined their designs, discarding some features and enhancing others. Constantly striving to produce the best push knife in the world. This Safe Maker series represents the pinnacle of their learning, experience, testing, and development. The blades, shafts, and 'T' shaped tangs are fashioned from one solid piece of Japanese AUS8A Stainless Steel with a stone washed finish, and then subsequently vacuum heat treated and sub-zero quenched for added strength and performance. A textured Kray-Ex handle encapsulates the tang and part of the shaft for added comfort and security. Includes an easily concealable and sturdy Secure-Ex boot/belt sheath. SPECIFICATIONS: --Weight: 2.3oz --Blade Thickness: 4.6mm -Blade Length: 3-1/4" --Blade Steel: Japanese AUS8A w/ Stonewashed Finish --Handle Length/Material: 1-3/4" Kray-Ex --Overall Length: 5" Additional Features: --Secure-Ex® Sheath Taiwan
-
SOCP
$117.00Benchmade 176BKSN SOCP. The 176BKSN SOCP skeletonized dagger is the optimal tool for self-defense and allows the user to maintain dexterity and manipulate other objects without putting down the knife. The specialized sheath design also integrates into gear and webbing while keeping a low profile. MOLLE® compatible. FEATURES: --Blade Edge: Plain --Blade Finish/Color: Black BK Coated --Blade Steel: 440C --Hardness: (58-60 HRC) --Blade Style/Shape: Spear-point --Handle Material: 440C --MOLLE Compatible: Yes --Sheath Type: Sand Color Injection Molded Plastic SPECIFICATIONS: --Blade Steel: 440C --Blade Length: 3.22" (8.18cm) --Blade Thickness: 0.175" (4.45mm) --Overall Length: 7.25" (18.42cm) --Handle Length: 4.03" (10.24cm) --Handle Thickness: 0.175" (4.45mm) --Weight: 2.12oz. (62.37g) --Sheath Weight: 1.04oz. (29.48g) --Brand: Benchmade --Model Name: SOCP --Model Number: 176BKSN --Item Number: BM176BKSN --Country of Origin: USA