KNIVES

American Tomahawk Model 1 ACT810713 ATC-Hickory1-Coy Coyote Brown with Hickory Handle. Features a 1060 High Carbon Steel Head powder coated Coyote Brown that is heat treated to HCR 56. Genuine Coyote Brown finished Tennesse Hickory Handle. --Full Handle Length: 14 1/8" --Full Head Length: 8" --Blade Edge Length: 2 1/2" --Spike Length: 2 1/4" --Weight: 20 oz w/o sheath -- Bottom Eject Low Ride Black Kydex Sheath that includes low ride MOC straps for belt carry. Made in USA

Ka-Bar 1219 U.S. Army marked partially serrated fighting knife.

  The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials. Tang stamped U.S. ARMY. U.S. Army stamped leather sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  U.S. ARMY--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--KNIFE MANUFACTURED IN:  United States--SHEATH MANUFACTURED IN:  Mexico--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches

A smaller version of the large Holdout, this smaller Hold Out is has a small size but is still stout with a  flat grind blade , Tri-Ad Lock and  symmetry...keystones of the Hold Out.  Now sporting S35VN premium blade steel.  If you are looking for a solid folder - this is it!

SPECIFICATIONS:

--Weight: 3 oz 

--Blade Thickness: 3.5mm 

--Handle Length/Material: 5in Long G-10 Handle 

--Removable/reversable stainless pocket clip for tip-up carry.

--Blade Steel: S35VN Steel

--Blade Edge:  Serrated Edge

--Thumbstud

--Tri-ad Lock 

--Blade Length: 3in 

--Overall Length: 7in

Taiwan

Imported by us from the Klotzli factory in Switzerland. KLOTZLI Loadmaster Fixed Blade The Loadmaster is a strong and compact field knife that can tackle most any challenge - in the field or at home. The Klotzli LoadMaster knife was designed by Samuel Klotzli according to the needs of the Swiss Air Force's Loadmasters. This full tang knife is 7 1/2" overall with a 3" blade.  It is hand ground of stonewashed Bohler N690 stainless steel.  The LoadMaster's blade is 1/8" thick and weighs only  2 1/4 ounces.  There are ribs on top and a finger groove handle for a secure grip.  This knife features a squared off blunt tip for chisling/flat blade screwdriver, a partially serrated cutting edge, a belt/line cutter, and a glass breaker pommel. The knife has a Stonewash finish and comes with textured black micarta handle scales.  For carrying, a black kydex sheath is provided.  It can be conveniently carried as a neck knife, boot knife, or on a belt or pack when used with an adapter

Hand made in Switzerland.

LIMITED AVAILABILITY

Introducing the tried-and-true KA-BAR Fighting/Utility Knife to a post-orbital world. Made with battle-tested 1095 Cro-Van steel, the blade has a grey powder coating and is marked USSF and KA-BAR. The handle is blue Kraton G® and is carried in a grey hard plastic sheath that is MOLLE-compatible. Made in Olean, NY, USA, Earth. SPECIFICATIONS: --WEIGHT: 0.65 lb --BLADE TYPE: Fixed Blade --BLADE LENGTH: 7 inches --OVERALL LENGTH: 11.75 inches --EDGE ANGLES: 20 degree --SHAPE: Clip Point --TANG STAMP: USSF/KA-BAR --KNIFE MATERIAL: 1095 Cro-Van --GRIND: Flat --HANDLE MATERIAL: Blue Kraton G --ROCKWELL HARDNESS: 56-58 --BUTT CAP/GUARD: Yes --KNIFE COUNTRY OF ORIGIN: United States US flag --SHEATH COUNTRY OF ORIGIN: Taiwan

The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II.  This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.

SPECIFICATIONS:

--Overall Length: 12"

--Blade Length: 7"

--Blade Thickness: 3/16"

--Blade Steel: SK5

--Blade Hardness: 58-60 HRC

--Blade Style: Fixed double edge dagger symmetrical blade

--Coating: Black Powder Coat

--Sheath: Black Plastic injection molded Sheath with nylon hanger

--Weight: 0.444 LBS (Knife)

Taiwan --Be advised, some jurisdictions have restrictions on double edge blades.  Be sure of your laws as they apply.

The Monitor blends tactical cutting ability with everyday carry convenience. Manual KVT ball bearings create smooth opening, and the ultra-reliable DuraLock secures the blade. Complete cutting tasks using the piercing spear point and slicey D2 tool steel edge with a flat grind. Grip the textured handle for greater control and pull back on the ambidextrous DuraLock to safely close the blade. Finally, it includes a reversible extra-deep-carry pocket clip for easy carry. Despite its smaller size, the Monitor packs a punch.

FEATURES:--Everyday carry knife; all-black, tactical look--DuraLock secures the blade open using a solid steel crossbar; pull the ambidextrous lock back to safely close the knife--D2 high-carbon tool steel is highly wear resistant, tough, offers excellent edge retention; black-oxide finish--Opens easily with KVT ball-bearing system and a flipper--Extra deep-carry pocketclip is easily reversible for left/right carry; lanyard hole

SPECIFICATIONS:--Blade Length:  3 in. (7.6 cm)--Blade Material:  D2--Blade Finish/Coating:  Black-oxide coating--Blade Thickness:  0.09 in. (2.3 mm)--Closed Length:  4.2 in. (10.7 cm)--Handle Material:  Glass-filled nylon--Handle Thickness:  0.49 in. (12.4 mm)--Overall Length:  7.2 in. (18.3 cm)--Weight:  2.7 oz. (77 g)

PRC

Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.

  The most famous fixed blade knife in the World.  The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC.  Hard plastic MOLLE compatible sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  USMC--NSN:  1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches--KNIFE:  USA --SHEATH:  Taiwan