KNIVES

The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II.  This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.

SPECIFICATIONS:

--Overall Length: 12"

--Blade Length: 7"

--Blade Thickness: 3/16"

--Blade Steel: SK5

--Blade Hardness: 58-60 HRC

--Blade Style: Fixed double edge dagger symmetrical blade

--Coating: Black Powder Coat

--Sheath: Black Plastic injection molded Sheath with nylon hanger

--Weight: 0.444 LBS (Knife)

Taiwan --Be advised, some jurisdictions have restrictions on double edge blades.  Be sure of your laws as they apply.

Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.

  The most famous fixed blade knife in the World.  The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC.  Hard plastic MOLLE compatible sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  USMC--NSN:  1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches--KNIFE:  USA --SHEATH:  Taiwan

Joe Flowers designed Condor 232-3HC Mini Bushlore Knife.

A compact and stout bush knife, the mini is easy to carry and still provides size and strength for many field and camp applications.

SPECIFICATIONS:

--BLADE:  3 in (76,5 mm)

--OAL:  6.5 in (165 mm)

--BLADE THICKNESS:  0,1 in (3 mm)

--WEIGHT:  2.9 oz (82 g)

--BLADE MATERIAL:  1075 High Carbon Steel

--FINISH:  Blasted Satin

--GRIND:  Scandi

--HANDLE:  Walnut

--SHEATH:  Hand Crafted Welted Leather

El Salvador

LT Wright Frontier Valley Fixed Blade. Features a 3" flat ground blade of A2 steel. Matte finished Black and Blue G-10 handle scales. 6 1/2" Overall. Leather sheath.

Originally designed from the Finnish sami knife, used by the Laplanders for all their hunting and bushcraft tasks. These knives have traditionally been flat ground, single or double sided, with a "zero-ground" edge ground to the edge.

It occurred to TOPS that a good idea is still a good idea in a smaller package. The Mini Scandi was a result of the very popular, original Brothers of Bushcraft (BROS-01) knife. It offers all the advantages of a modified Scandi grind in a neck knife, which makes it easily concealable. All of the cutting ability of a larger Scandi that can also fit in your pocket or pack.
SPECIFICATIONS:--Overall Length: 6.13"--Blade Thickness: 0.130"--Hardness: RC 56-58--Blade Finish: Black Traction Coating--Handle Material: Tan Canvas Micarta--Weight w/ Sheath: 3.8oz--Sheath Included: Yes--Sheath Material: Black Kydex--Designer: Leo Espinoza. USA

Old Hickory 7" Kitchen Butcher Knife.

First introduced in 1924, the Old Hickory® knives are the most venerable product line still in active production. The Old Hickory® knives feature a hardwood handle secured with brass compression rivets to 1075 carbon steel blades that are both very sharp and capable of retaining an edge better than most stainless knives. Proudly manufactured with artisan processes for over 90 years, Old Hickory® has stood the test of time and is proven to be the best carbon steel kitchen cutlery sold today.

USE & CARE

Please note that the Old Hickory knives are made with carbon steel.  We have been making Old Hickory since the early 1900's.  Carbon steel knives require extra care to prevent rusting and oxidation of the surface.  Old Hickory should not be placed in a dishwasher or allowed to soak in a sink.  We recommend cleaning the blade with a damp sponge or cloth and dry thoroughly.  Some people go a step further and apply a light coating of vegetable oil to the blades surface. If your blade shows signs of rust, use some steel wool to remove it and then apply some oil to the blade.   To keep the blade razor sharp, use a honing steel, sometimes referred to as sharpening steel, or sharpening stick. After years of use, the steel blade will develop a patina, a darkening which is desirable and an indication of its age.  Old Hickory knives are durable and affordable, but do require special care. 

USA

Old Hickory 7"  Kitchen Cleaver  

First introduced in 1924, the Old Hickory® knives are the most venerable product line still in active production. The Old Hickory® knives feature a hardwood handle secured with brass compression rivets to 1075 carbon steel blades that are both very sharp and capable of retaining an edge better than most stainless knives. Proudly manufactured with artisan processes for over 90 years, Old Hickory® has stood the test of time and is proven to be the best carbon steel kitchen cutlery sold today.

USE & CARE

Please note that the Old Hickory knives are made with carbon steel.  We have been making Old Hickory since the early 1900's.  Carbon steel knives require extra care to prevent rusting and oxidation of the surface.  Old Hickory should not be placed in a dishwasher or allowed to soak in a sink.  We recommend cleaning the blade with a damp sponge or cloth and dry thoroughly.  Some people go a step further and apply a light coating of vegetable oil to the blades surface. If your blade shows signs of rust, use some steel wool to remove it and then apply some oil to the blade.   To keep the blade razor sharp, use a honing steel, sometimes referred to as sharpening steel, or sharpening stick. After years of use, the steel blade will develop a patina, a darkening which is desirable and an indication of its age.  Old Hickory knives are durable and affordable, but do require special care. 

USA

Cold Steel 49LRT Recon Tanto SK-5 Over the last 34 years, Cold Steel has succeeded in establishing the Tanto as a superior blade for combative application. Their pioneering research, development and refinement of this blade shape has proven the value of the "American Tanto" style reinforced point beyond question. The Recon Tanto continues to redefine the standard for combat knives around the globe. Having seen active military application in numerous conflicts over the last 20 years, it is well on its way to becoming the preferred fixed blade for special military units and even SWAT teams on our own soil. Experience the extraordinary quality - test the distinctive razor sharp edge for yourself and you will see why the Recon Tanto is a knife you can't afford to be without! SPECIFICATIONS: --Weight: 9oz --Blade Thickness: 5mm Blade --Length: 7" --Blade Steel: SK-5 w/ Black Tuff-Ex Finish --Handle Length/Material: 4-3/4" Kray-Ex --Overall Length: 11-3/4" --Additional Features: Secure-Ex® Sheath Taiwan

Buck 0223BLS Silver Creek 6" Fillet Knife. Safe, reliable and durable, this medium sized fillet knife has a titanium coated blade and is designed for added flexability and corrosion resistance. A rubberized anti-slip grip and stainless steel safety guard give excellent control of the knife in use. SPECIFICATIONS: --Blade Steel: 420J2 Stainless --Blade Shape: Fillet --Blade Grind: Flat --Blade Edge: Plain --Handle: Blue rubberized --Lanyard: Yes --Blade Length: 6 7/16" --Blade Thickness: 0.067" --Overall Length: 11 3/8" --Weight: 5 oz --Gray Hardshell sheath included. --Brand: Buck --Model Name: Silver Creek Fillet --Model Number: 0223BLS --Item Number: BU223BLS Country of Origin: PRC