KNIVES

Case XX 64662 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Black Anodized Aluminum Handles..
Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.
This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Black Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.
--Closed Length: 4.75"
Made in the USA at the Case Factory!

Direct from Curtiss Knives, this F3 Large Slicer Flipper features a 3 3/4" blasted finish plain edge blade of Magnacut steel.  Stonewash Aqua/Purple Titanium handles with SPM milling.  Titanium pocket clip oriented for right side tip-up carry.  'Ombre' Titanium pivot and Blue Titanium hardware.

Comes boxed with padded zipper pouch, Certificate of Authenticity and some Curtiss bling.  5" closed.

USA

Direct from Curtiss Knives, this F3 Large Wharny Flipper features a 3 3/4" two-tone plain edge blade of Magnacut steel.  Stonewash Bronze Titanium handles with HD milling.  Titanium pocket clip oriented for right side tip-up carry.  Purple Titanium hardware.

Comes boxed with padded zipper pouch, Certificate of Authenticity and some Curtiss bling.  5" closed.

USA

Direct from Curtiss Knives, this F3 Large Spanto Flipper features a 3 3/4" two-tone compound ground plain edge blade of Magnacut steel.  Stonewash 'Ombre' Titanium handles with ball milling.  Titanium pocket clip oriented for right side tip-up carry.  Purple and Bronze Titanium hardware.

Comes boxed with padded zipper pouch, Certificate of Authenticity and some Curtiss bling.  5" closed.

USA

Ka-Bar 1219 U.S. Army marked partially serrated fighting knife.

  The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials. Tang stamped U.S. ARMY. U.S. Army stamped leather sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  U.S. ARMY--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--KNIFE MANUFACTURED IN:  United States--SHEATH MANUFACTURED IN:  Mexico--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches

Was $995.00  NOW $750.00

From a collection: Alan Elishewitz Custom Phantom. Authenticity confirmed in person by the maker. Features a 3 3/4" false edge dagger grind blade with reverse hollow grind of Damasteel. Rounded carbon fiber handle scales over bronze anodized jeweled Titanium liners. Liner-Lock design. Blue anodized pocket clip and blue spacers. Dual thumbstuds. 4 3/4" closed. Elishewitz estimated he made this piece in the mid-90's. No signs of carry or use. Original makers edge. Near mint condition suitable for any collection. FEATURES AND SPECIFICATIONS: --Blade Steel: Damasteel --Blade Style: Dagger --Blade Grind: Hollow Grind --Blade Finiish: Damascus --Edge Type: Plain Edge --Handle Material: Carbon Fiber --Lanyard Hole: No --Pocket Clip: Yes- Blue Anodized Titanium - Tip-down carry --Frame/Liner: Jeweled Bronze Anodized Titanium --Action: Manual --Brand: Alan Elishewitz Custom --Model Name: Phantom --Use: Custom Collectable - everyday Carry (EDC) --Blade Thickness: 0.125" --Cutting Edge: 3 1/2" --Blade Length: 3 3/4" --Handle Length: 4 3/4 " --Overall Length: 8 1/2" --Handle Thickness: 0.573" Country of Origin: USA

Spartan - Harsey Nessmuk Fixed Blade Field Knife.  The Nessmuk is a stout and solid field knife capable of most field and camp tasks.   It features a 5 1/2" black powder coat finished plain edge blade of 1095 Cro-Van steel.

The textured and contoured black injection molded handle scales sit of a strong full tang construction.  Overall length is 10 1/2".

Black hardshell retention sheath (btw, best retention mechanism I have seen) woth nylon belt loop.

Knife and sheath made in USA1

The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II.  This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.

SPECIFICATIONS:

--Overall Length: 12"

--Blade Length: 7"

--Blade Thickness: 3/16"

--Blade Steel: SK5

--Blade Hardness: 58-60 HRC

--Blade Style: Fixed double edge dagger symmetrical blade

--Coating: Black Powder Coat

--Sheath: Black Plastic injection molded Sheath with nylon hanger

--Weight: 0.444 LBS (Knife)

Taiwan --Be advised, some jurisdictions have restrictions on double edge blades.  Be sure of your laws as they apply.

Blackjack Classic Blades Model 16SSP Jet Pilot with Genuine Red Stag Handle and Sambar Stag Pommel. A beautiful and well made fixed blade suitable for a center display or heavy work in the field.  Includes MOLLE compatable leather belt sheath.

SPECIFICATIONS:--Blade Length:  5.5"--Cutting Edge:  4.625"--Handle Length:  4.75"--Overall Length:  0.25"--Blade Material:  A2 Tool Steel--Blade Thickness:  0.21"--Blade Style:  Drop Point--Blade Grind:  Convex--Blade Finish:  Satin--Handle Material:  Red Stag with Sambar Stag Pommel--Handle Thickness:  1.13"--Sheath:  Leather--Weight:  8.4 oz.  Made in USA Red Stag and Sambar Stag are a naturally occurring material.  Size, weight, coloration and shape may vary. NOTE:  A2 is a non-stainless tool steel and may discolor or rust.  This is not a flaw in the steel, but simply a characteristic.  Keep blade clean, dry and oiled to help preserve the finish if you so choose.