KNIVES
-
Ti-Lite 6" G-10 Handle
$199.97Ti-Lite tactical folders evoke the sleek speed and rebellious lines of the classic 1950's-styled switchblade. Unlike most switchblades however, they are legal to carry nearly everywhere. They feature American S35VN Alloy blades with DLC (Diamond Like Coating), razor sharp edges and sturdy, needle sharp points. The handles are made of high quality G-10. And for maximum strength and safety, Cold Steel has equipped the Ti-Lites with their patent pending, stainless steel leaf spring locks (proven, in their tests, to hold 130 lbs). For ease of carry, the Ti-Lites come equipped with a small, but unobtrusive steel pocket clip, and can be opened rapidly by using the thumb studs or by snagging a quillon on the edge of your pocket as you draw your knife out. We are grateful to custom knife maker, Phil Boguszewski, for his design influence and help in the creation of the Ti-Lites.
SPECIFICATIONS:--Weight: 7.1oz --Blade Thickness: 4mm --Blade Length: 6" --Blade Steel: S35VN w/ Black DLC Coating
--Handle Length/Material: 4-3/4" G-10 --Overall Length: 13"
Taiwan
-
Crawford Leopard Cub
$650.00Direct from Crawford, this custom Leopard Cub features a 2 3/4" satin finished hollow ground blade of S30V stainless steel. Blasted titanium handles with fileworked backspacer. Single thumbstud. Linerlock. Blasted Titanium pocket clip.
3 3/4" closed.
Custom hand made in USA
-
Oyabun Limited
$187.99Cold Steel 32AA Oyabun Limited Edition
Lynn C. Thompson Signature Knife - The Oyabun Limited is a high-end collectible version of our Oyabun. It shares features in common with the standard model in terms of functionality and appearance but differs markedly in the materials used in its construction. It also has the value of being a collectible keepsake in that only 3500 have been produced. Each is individually serial numbered, and each box will be personally signed by Lynn C. Thompson himself! The premium S35VN steel in the blade is a costly powdered steel that is heat treated to Rc 59-60 and sub zero quenched. It has been given an attractive two-tone line grain finish on the blade flats, and a high satin polish on the blade bevels. Most noticeably, the handle frame is milled from two solid billets of 6061 aluminum to create the bolster and pommel, which have been given a fine mirror polished finish. The handle also features CNC machined G-10 slabs with a diamond checkering pattern for a good secure grip.
SPECIFICATIONS:--Each knife individually serial numberd--Each box personally signed by Lynn Thompson--Blade Thickness: 3.8mm--Handle Length/Material: 4 3/4in Aluminum with G-10 Scales--Overall Length: 8 1/4in Taiwan -
Pursuit Folder Small Orange
$89.99Buck 0661ORS Pursuit Pro Folding Lockback with Orange Handles and a 3"premium BOS treated S30V blade steel. USA -
Paradigm Black
$199.99Buck 0590BKS Paradigm Assisted Opener Black G-10. (12862) The Paradigm has been fine-tuned to provide a safe, simple and effective way to carry an assisted opening knife, yet to be able to deploy it fast and easily. SPECIFICATIONS: --Blade Steel: BOS Treated S35VN --Blade Shape: Drop Point --Blade Lengh: 3" --Handle: Textured Black G-10 with Cerakote coated rotating bolster. --Pocket Clip: Reversible - deep pocket carry - Cerakote Graphite Black Coated Stainless Steel. --Closed Length: 4 3/8" --Weight: 4.8 oz USA -
Vox F3 II Carbon Fiber
$161.25Until now, Jesper Voxnaes has been known to most customers as a designer of various fixed blades. But for some time now, Jesper has also had great success building folders. His Vox F3 Titan Framelock compels with the same virtues and qualities as his fixed blade designs - strength, high utility, off-beat yet completely practical compositions. These updated models of the original F3 (item 01BO333) feature premium S35VN blade steel, and are now available in a variety of handle material and two sizes. The added details, such as the blue anodized titanium clip (tip-up) and the blue anodized "Nessie Spacer," provide a special flair. This model features a lightweight carbon fiber handle scale and satin finished blade. SPECS: Overall length: 7 1/6" Blade length: 3" Weight: 3.5 oz. Blade thickness: 0.2" Blade material: CPMS35VN Handle material: Carbon fiber Designer: Jesper Voxnæs -
Vox F3
$179.25Until now, Jesper Voxnaes has been known to most customers as a designer of various fixed blades. But for some time now, Jesper has also had great success building folders. His Vox F3 Titan Framelock compels with the same virtues and qualities as his fixed blade designs - strength, high utility, off-beat yet completely practical compositions. These updated models of the original F3 feature premium S35VN blade steel. This model features a rugged G-10 handle scale and stonewash finished blade. Blade length: 3 3/8". Overall length: 8". Weight: 5.3 oz. -
Kinzua Flipper - S35VN...
$144.99Case XX 64659 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Green Anodized Aluminum Handles..
Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.
This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Green Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.
--Closed Length: 4.75"
--Weight: 3.6 oz
Made in the USA at the Case Factory
-
Tom Mayo Dr Death
$1,675.00Beautiful Tom Mayo Custom Dr Death. Features a 4 3/16" plain edge blade of S30V Stainless. Dual thumbstuds. Titanium handle. Titanium pocket-clip.
5 1/2" closed.
Original Mayo edge. No signs of use or carry. As near perfect a pre-owned Mayo as you will find.
USA
-
Urban Red S30V PE
$93.29The Spyderco Urban is a compact folder that does not have a locking blade - but rather has an enhanced Notch-joint spring mechanism to create a non-locking folding knife that offers the advantages of one-hand opening and convenient clip carry. This Spyderco Urban Sprint Run features a redy Fiberglass Reinforced Nylon (FRN) handle and a full flat gournd blade crafted from CPM-S30V steel A very nice, lightweight and compact folding pocket knife that won't raise eyebrows at the country club....
Wire pocket clip for right or left side tip-up carry.
Blade length: 2 9/16"
Closed length: 3 1/2"
ITALY -
Kinzua Flipper - S35VN...
$144.99Case XX 64661 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Red Anodized Aluminum Handles..
Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.
This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Red Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.
--Closed Length: 4.75"
Made in the USA at the Case Factory -
Kinzua Flipper - S35VN...
$144.99Case XX 64660 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Blue Anodized Aluminum Handles..
Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.
This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Blue Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.
--Closed Length: 4.75"
Made in the USA at the Case Factory -
Caly 3.5 Carbon Fiber ZDP189
$210.00Spyderco C144CFPE Spyderco Calypso - Caly 3.5 with Carbon Fiber handles and laminated ZDP-189 plain edge blade. Features a 3 1/2" full flat ground plain edge laminate blade with a ZDP-189 core and pliable 420J2 outer layer. Gray Carbon Fiber handles. Deep carry wire pocket clip that is reversable for right or left side tip-up carry. Dual skeletonized steel liners. 4 5/16" closed. Japan
-
Onyx EDC
$22.95Outdoor Edge Onyx EDC Lockback. Features a 3 1/2" Japanese 420J2 stainless replacable edge razor blade with dual thumbstuds. Black textured Grivory handles with lanyard hole. Removable stainless pocket clip. Comes with three replacable blades. (also available separately). -
B.O.A. Box Opening Assistant
$12.97Outdoor Edge BOK-20C Black Handled B.O.A. Box Opening Assistant Folding Locking Utility Knife.
This folding utility knife is a massive upgrade to the classic box cutter and much, much more. The perfect ergonomics along with extensive jimping on the stainless steel blade holder delivers power from your hand directly to the cutting edge. Simply and safely replace blades with a flick of your finger using the safetyguarded thumb button. Accepts all standard utility razor blades. Constructed of 420J2 stainless steel with a sure-grip textured glass/nylon polymer handle with pocket clip. Lockback design for safety.
Three utility blades included
SPECIFICATIONS:
Blade: 1.0 in / 2.5 cm
Overall: 5.75 in / 14.1 cm
Weight: 2.7 oz / 76.5 g
PRC
-
B.O.A. Box Opening...
$12.97Outdoor Edge BOK-20C Black Handled B.O.A. Box Opening Assistant Folding Locking Utility Knife. This folding utility knife is a massive upgrade to the classic box cutter and much, much more. The perfect ergonomics along with extensive jimping on the stainless steel blade holder delivers power from your hand directly to the cutting edge. Simply and safely replace blades with a flick of your finger using the safetyguarded thumb button. Accepts all standard utility razor blades. Constructed of 420J2 stainless steel with a sure-grip textured glass/nylon polymer handle with pocket clip. Lockback design for safety. Three utility blades included SPECIFICATIONS: Blade: 1.0 in / 2.5 cm Overall: 5.75 in / 14.1 cm Weight: 2.7 oz / 76.5 g PRC