KNIVES
Active filters
-
Spyderthrower Medium
$108.50Designed by Canadian custom knifemaker Harald Moeller in collaboration with Spyderco, this three knife set is right on target. Each of the three knives in the large set are 10.1" long and 0.217" thick. The two tone blade is made of 8Cr13MoV stainless steel. Comes with a triple tiered leather sheath. PRC -
Spyderthrower Large
$116.20Designed by Canadian custom knifemaker Harald Moeller in collaboration with Spyderco, this three knife set is right on target. Each of the three knives in the large set are 11" long and 0.217" thick. The two tone blade is made of 8Cr13MoV stainless steel. Comes with a triple tiered leather sheath. PRC
-
Persistence PS S35VN Blade...
$103.60Spyderco C136PSBL Persistence featuring a 2 11/16" flat ground partially serrated blade of CPM-S35VN Stainless Steel. Blue FRN handles over dual skeletonized steel liners. Linerlock. Pocket clip. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry. 4 1/8" closed. PRC
-
UpTern PS
$54.38Spyderco C261PS UpTern Partially Serrated. The UpTern features a 2 3/4" full flat ground partially serrated blade of 8Cr13MoV Stainless Steel. Brushed Stainless Steel Handles. Pocket clip. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry. Mid-lockback design. 3 3/4" closed. PRC
-
Pacific 2 Salt PE Black
$135.00Spyderco C91PBBK2 Pacific 2 Salt. Black Firberglass Reinforced Nylon (FRN) handles and Black finished H1 Stainless Steel plain edge blade. A dynamic combination of the third-generation Endura one-piece handle design and the ultra-corrosion-resistant properties of H-1 steel, the original Pacific Salt was an incredibly capable full-service folding knife. What it lacked, however, were the improvements that made the current Endura 4 even better than its predecessor. The Pacific Salt 2 includes a high-traction Bi-Directional Texture pattern, enhanced handle ergonomics, and a versatile four-position pocket clip. In addition to these features, this knife integrates a Black H-1 blade with a linerless handle in a shining example of Spyderco's passion for Constant Quality Improvement (C.Q.I.). This knife was born to perform in and around the water. SPECIFICATIONS: --Overall Length: 8.72" (221mm) --Closed Length: 4.98" (126mm) --Blade Length: 3.78" (96mm) --Blade Thickness: 0.114" (3mm) --Blade Steel: H1 Stainless --Blade Finish: Black --Handle Material: Black Fiberglass Reinforced Nylon (FRN) --Pocket Clip: Yes, right or left hand, tip up/tip down --Opening: Spyderhole --Lock Type: Lockback Weight: 2.9oz --Brand: Spyderco --Model Name: Pacific 2 --Model Number: C91PBBK2 --Item Number: SC91PBBK2 Country of Origin: Japan -
Spyderco Yellow Salt 2 SE
$110.25Spyderco Salt 2 with H-1 fully serrated Spyderedge blade and Yellow FRN handles. This Spyderco Salt 2 features a 3" fully serrated Spyderedge blade of H-1 Stainless steel. H-1 is a radically different alloy that uses nitrogen instead of carbon to create the steel-like properties. It is mechanically processed instead of heat treated to "work harden" the cutting edge and produce an incredably strong blade. This Salt 2 features a yellow fiberglass reinforced nylon (FRN) handle with Bi-Directional Texturing. Based on the Delica 4 pattern, the Salt 2 differs in the H-1 blade steel, stainless screws, rust resistant hardware and black titanium pocket clip. All four corners are drilled and tapped, so the clip can be moved for right or left side tip-up or tip-down carry. Mid-Lockback design with Boye dent. Closed length: 4 1/4". Seki City -
Salt 2 Wharncliffe SE
$102.90Spyderco C88SWCYL2 Salt 2 Wharncliffe fully serrated. Features a 2 7/8" fully serrated Wharncliffe blade of H1 Stainless Steel. Yellow FRN handles. Mid-Lockback design with Boye Dent. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry. Seki City -
Spyderco Yellow Salt 2 PE
$110.25Spyderco Salt 2 with H-1 plain edge blade and Yellow FRN handles. This Spyderco Salt 2 features a 3" plain edge blade of H-1 Stainless steel. H-1 is a radically different alloy that uses nitrogen instead of carbon to create the steel-like properties. It is mechanically processed instead of heat treated to "work harden" the cutting edge and produce an incredably strong blade. This Salt 2 features a yellow fiberglass reinforced nylon (FRN) handle with Bi-Directional Texturing. Based on the Delica 4 pattern, the Salt 2 differs in the H-1 blade steel, stainless screws, rust resistant hardware and black titanium pocket clip. All four corners are drilled and tapped, so the clip can be moved for right or left side tip-up or tip-down carry. Mid-Lockback design with Boye dent. Closed length: 4 1/4". Seki City -
Salt 2 Wharncliffe PE
$102.90Spyderco C88SWCYL2 Salt 2 Wharncliffe plain edge. Features a 2 7/8" plain edge Wharncliffe blade of H1 Stainless Steel. Yellow FRN handles. Mid-Lockback design with Boye Dent. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry. Seki City -
Native 5 Black FRN SE
$138.00Spyderco Native 5 Black FRN Spyderedge. Features a 2 15/16" Satin finished fully serrated blade of CPM S35VN stainless. Black FRN handles are drilled and tapped on all four corneres for true amidextrious use. Lockback. ~4" closed USA -
Native 5 Gray Maxamet PE
$225.00This Spyderco Native 5 knife features a 2 7/8" flat ground plain edge blade of Premium Micro-melt Maxamet steel with tremendous edge retention and toughness. Lightweight Gray Fiberglass Reinforced Nylon (FRN) handles. Highly refined Mid-lockback design. Full stainless back-spacer. Blade has distal taper and swedge. Stainless spoon pocket clip. Drilled and tapped on all four corners. USA -
Spyderco Swayback
$313.95Spyderco C249TIP Swayback Inspired by 19th century English Jack knives, the sway back pattern is a stylish and extremely functional cutting tool. In his latest Spyderco collaboration, renowned Polish knifemaker Marcin Slysz supercharges this classic design by rendering it with state-of-the-art materials and craftsmanship. The SwayBacks hollow-ground Wharncliffe blade is crafted from CTS® XHP stainless steel and has a handsome stonewashed finish. It is housed in an open-backed handle constructed with solid titanium scales. Both scales are beautifully crowned for comfort and the reverse-side scale forms the foundation of a sturdy Reeve Integral Lock (R.I.L.) with a stainless steel interface. A polished stainless steel clip provides convenient carry and is reversible for left or right-side tip-up access. Specs: --Overall Length: 8.04" --Blade Length: 3.53" --Blade Thickness: 0.139" --Weight: 3.9 Ounces --Blade Grind: Hollow --Pocket Clip: Tip Up Ambi --Lock Type: Framelock --Opening Option: Spyderco Round Hole --Country of Origin: Taiwan -
Insistent PS
$56.25Spyderco C246GPS Insistent Partially Serrated. The Spyderco Insistent is a robust small, budget friendly folding linerlock that feels great in the hand due to the G-10 Scales and excellent cutting due to the flat ground blade. Excellent knife for the money! SPECIFICATIONS: --Blade Steel: 8Cr13MoV Stainless --Blade Shape: Leaf --Blade Grind: Flat --Blade Finish: Satin --Blade Edge: Partially Serrated --Frame: Skeletonized Stainless Steel --Handle: Textured Black G-10 --Pocket Clip: Yes - Wire - Reversable left or right side tip-up carry. --Opener: Spyderco Hole --Lock: Linerlock --Blade Length: 3 1/2" --Blade Thickness: 0.118" --Handle Length: 3 3/4" --Handle Thickness: 0.475" --Overall Length: 6 1/8" --Weight: 3.7 oz --Brand: Spyderco --Model Name: Insistent --Model Number: C246GPS --Item Number: SC246GPS --Country of Origin: PRC -
Insistent PE
$56.25Spyderco C246GP Insistent Plain Edge. The Spyderco Insistent is a robust small, budget friendly folding linerlock that feels great in the hand due to the G-10 Scales and excellent cutting due to the flat ground blade. Excellent knife for the money! SPECIFICATIONS: --Blade Steel: 8Cr13MoV Stainless --Blade Shape: Leaf --Blade Grind: Flat --Blade Finish: Satin --Blade Edge: Plain --Frame: Skeletonized Stainless Steel --Handle: Textured Black G-10 --Pocket Clip: Yes - Wire - Reversable left or right side tip-up carry. --Opener: Spyderco Hole --Lock: Linerlock --Blade Length: 3 1/2" --Blade Thickness: 0.118" --Handle Length: 3 3/4" --Handle Thickness: 0.475" --Overall Length: 6 1/8" --Weight: 3.7 oz --Brand: Spyderco --Model Name: Insistent --Model Number: C246GP --Item Number: SC246GP --Country of Origin: PRC -
Emphasis PE
$70.88Spyderco C245GP Emphasis Plain Edge. The Spyderco Emphasis is a large, budget friendly folding linerlock that feels great in the hand due to the G-10 Scales and excellent cutting due to the flat ground blade. Excellent knife for the money! SPECIFICATIONS: --Blade Steel: 8Cr13MoV Stainless --Blade Shape: Leaf --Blade Grind: Flat --Blade Finish: Satin --Blade Edge: Plain --Frame: Skeletonized Stainless Steel --Handle: Textured Black G-10 --Pocket Clip: Yes - Wire - Reversable left or right side tip-up carry. --Opener: Spyderco Hole --Lock: Linerlock --Blade Length: 3 1/2" --Blade Thickness: 0.125" --Handle Length: 4 3/4" --Handle Thickness: 0.480: --Overall Length: 8 1/4" --Weight: 4.8 oz --Brand: Spyderco --Model Name: Emphasis --Model Number: C245GP --Item Number: SC245GP --Country of Origin: PRC -
Efficient Black/Black PE
$64.88Spyderco C216GPBBK Efficient with Black Oxide Coated 8Cr13MoV Stainless Plain Edge Blade and Black Finely Textured G-10 Handles. FEATURES AND SPECIFICATIONS: --Blade Steel: 8Cr13MoV Stainless --Blade Style: Drop Point --Blade Grind: Flat Grind --Blade Finiish: Black Oxide --Edge Type: Plain Edge --Handle Material: Finely Textured Black G-10 --Lanyard Hole: Yes --Pocket Clip: Yes - Reversable - Tip up carry --Frame/Liner: Black Oxide Coated Stainless Steel --Action: Manual --Opener: Thumbhole --Lock: Stainless Steel Linerlock --Brand: Spyderco --Model Name: Efficient --Model Number: C216GPBBK --Use: everyday Carry (EDC) --Blade Thickness: 0.125" --Cutting Edge: 2 3/4" --Blade Length: 2 15/16" --Handle Length: 4 1/8" --Overall Length: 7 " --Handle Thickness: 0.453" --Weight: 4.1 oz Country of Origin: PRC OTHER FEATURES: --All black hardware --Jimping on finger choil and back of blade spine