KNIVES
Active filters
-
Blackjack 7 Natural Micarta
$288.97Blackjack Model 7 Natural Canvas Micarta handle with pommel. Features a 7 inch A2 Tool Steel Convex ground steel blade. Natural Canvas Micarta handle. Aluminum guard and Pommel. Handmade leather sheath. 12 1/4" overall length. USA Note: A2 tool steel is NOT a stainless steel. While considered by many to be a superior steel for field knives it will tarnish and rust. Use appropriate care. -
Blackjack 7 Stacked Leather
$299.97Blackjack Model 7 Stacked Leather. Features a 7 inch A-2 Tool Steel Convex ground steel blade. Leather stacked handle. Handmade leather sheath. 12 1/4" overall length.. USA A2 is a high carbon steel. While considered by many to be a superior hard use steel it is prone to discoloration, tarnish and rust. Use appropriate care. -
Spartan George Raider Dagger
$99.97The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II. This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.
SPECIFICATIONS:
--Overall Length: 12"
--Blade Length: 7"
--Blade Thickness: 3/16"
--Blade Steel: SK5
--Blade Hardness: 58-60 HRC
--Blade Style: Fixed double edge dagger symmetrical blade
--Coating: Black Powder Coat
--Sheath: Black Plastic injection molded Sheath with nylon hanger
--Weight: 0.444 LBS (Knife)
Taiwan --Be advised, some jurisdictions have restrictions on double edge blades. Be sure of your laws as they apply.
-
MARK 3 Navy Dive Knife
$116.58Ontario Mark 3 Model O Navy Dive Knife This knife is used exclusively by U.S. Naval Forces. Ontario Knife Company has produced the this knife for many decades and it has seen combat with U.S. armed forces. Needless to say, these veteran blades are not in the business of giving quarter.FEATURES AND SPECIFICATIONS:--BLADE COLOR: Black--BLADE FINISH: Black Oxide--BLADE GRIND: Flat Bevel w/ Secondary Flat Bevel--BLADE LENGTH: 6.0 in (15.2 cm)--BLADE MATERIAL: Stainless Steel--BLADE THICKNESS: 0.165 in (0.419 cm)--EDGE TYPE: Plain--HANDLE COLOR: Black--BLADE HARDNESS: 49-54 HRC--NATIONAL STOCK NUMBER: 1095-00-391-1056--OVERALL LENGTH: 11.1 in (28.2 cm)s--SHEATH: Black Molded Plastic--SHEATH TYPE: Belt Clip--Weight: 1.2 (Lbs)--UPC: 071721-0-6141-0 Made in the USA
-
Ka-Bar U.S.M.C Fighting...
$89.50Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.
The most famous fixed blade knife in the World. The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC. Hard plastic MOLLE compatible sheath included.
SPECIFICATIONS:--WEIGHT: 0.7 lb--BLADE LENGTH: 7 inches--OVERALL LENGTH: 11.875 inches--EDGE ANGLES: 20 Degrees--SHAPE: Clip Point--TANG STAMP: USMC--NSN: 1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Stacked Leather--ROCKWELL HARDNESS: 56-58--BUTT CAP/GUARD: 12GA Commercial Grade Carbon Steel--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 1.188 inches--KNIFE: USA --SHEATH: Taiwan
-
SRK Desert Tan Grip/Black...
$49.97Simply put, the Cold Steel SRK (Survival Rescue Knife) was designed specifically with this in mind. A popular knife with Military and Tactical Law Enforcement Personnel, the SRK is the standard issue knife of the Navy SEALS for their BUDS - or Basic Underwater Demolition training - the SRK has proved its worth time and time again in the most demanding environments. Whatever the mission, we're confident that the SRK is the knife for you!
SPECIFICATIONS:
--Weight: 8.2oz
--Blade Thickness: 5mm
--Blade Length: 6"
--Blade Steel: SK-5 High Carbon w/ Black Tuff-Ex™ Finish
--Handle Length: 4-3/4"
--Handle Material: Desert Tan Kray-Ex™ --Overall Length: 10-3/4"
--Includes Secure-Ex® Sheath
Taiwan
-
Next Gen - A2 Steel -...
$171.00LT Wright Next Gen Fixed Blade field knife. This Next Gen features a 3 1/4" flat ground blade of A2 steel. Matte Red and Black Linen Micarta handle scales. 7 1/2" Overall. Premium quality leather pouch style belt sheath.
USA
-
Hookset 6" Saltwater Cleaver
$25.95The Buck 150BLS Hookset 6" Saltwater Cleaver features a sturdy 6" gray Titanium coated 5Cr15MoV Stainless blade. Blue and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC -
Hookset 6" Saltwater Filet
$29.95The Buck 145BLS Hookset 6" Saltwater Filet Knife features a flexable 6" flat ground gray Titanium coated 5Cr15MoV Stainless blade. Blue and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC -
Hookset 6" Freshwater Filet
$25.95The Buck 144ORS Hookset 6" Freshwater Filet Knife features a flexable 6" flat ground 5Cr15MoV Stainless blade. Orange and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC -
Hookset 9" Freshwater Filet
$29.95The Buck 146ORS Hookset 9" Freshwater Filet Knife features a flexable 9" flat ground 5Cr15MoV Stainless blade. Orange and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC -
Santoku PE Black
$76.50The Spyderco Kitchen Knife Series has been resurrected utilizing their original MBS-26 blade steel. This Santoku Japanese butcher's knife features a thin, flat ground straight edge MBS-26 stainless blade. The steel was chosen specifically by Spyderco for kitchen use as it has proven edge retention, sharpness and excellent cutting performance. A comfortable black Sermollan handle is affixed and has both vertical and horizontal channels for a positive grip. Blade length: ~7". Overall length: 12" Seki City -
Spyderco Waterway
$175.00The Spyderco Waterway was designed by knife enthusiast and professional kayak fisherman Lance Clinton. The Waterway is the result of Clinton's vision for an ultra corrosion resistant knife for fishing tasks, that would still remain well suited to general outdoor and utility use. To achieve that vision, the Waterway is contructed from LC200N steel, a state of the art high nitrogen alloyed tool steel that offers extreme corrosion resistance and toughness even at high hardness. To maximize it's strength and balance, the Waterway features full tang construction. The G10 handle scales have been 3D machined with a raised diamond pattern to provide a non-slip grip in any environment. These scales are attached via a specialized process which uses blind pins and a high strength industrial adhesive to ensure a permanent, water tight bond. The Waterway ships with a custom molded Boltaron sheath with a versatile G-Clip attachment. The snap-fit sheath retains the knife securely, while still allowing a smoth draw and easy access to the knife. The G-Clip can be configured to provide a full range of carry options. Specs: Weight: 4.3 ounces Overall Length: 9.5" Blade Length: 4.44" Blade Steel: LC200N Blade Thickness: 0.120" Blade Shape: Drop Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: 3D Machined G10 Country of Origin: USA -
Old Hickory 7"" Butcher Knife
$15.97Old Hickory 7" Kitchen Butcher Knife.
First introduced in 1924, the Old Hickory® knives are the most venerable product line still in active production. The Old Hickory® knives feature a hardwood handle secured with brass compression rivets to 1075 carbon steel blades that are both very sharp and capable of retaining an edge better than most stainless knives. Proudly manufactured with artisan processes for over 90 years, Old Hickory® has stood the test of time and is proven to be the best carbon steel kitchen cutlery sold today.
USE & CARE
Please note that the Old Hickory knives are made with carbon steel. We have been making Old Hickory since the early 1900's. Carbon steel knives require extra care to prevent rusting and oxidation of the surface. Old Hickory should not be placed in a dishwasher or allowed to soak in a sink. We recommend cleaning the blade with a damp sponge or cloth and dry thoroughly. Some people go a step further and apply a light coating of vegetable oil to the blades surface. If your blade shows signs of rust, use some steel wool to remove it and then apply some oil to the blade. To keep the blade razor sharp, use a honing steel, sometimes referred to as sharpening steel, or sharpening stick. After years of use, the steel blade will develop a patina, a darkening which is desirable and an indication of its age. Old Hickory knives are durable and affordable, but do require special care.
USA
-
Old Hickory Cleaver
$22.97Old Hickory 7" Kitchen Cleaver
First introduced in 1924, the Old Hickory® knives are the most venerable product line still in active production. The Old Hickory® knives feature a hardwood handle secured with brass compression rivets to 1075 carbon steel blades that are both very sharp and capable of retaining an edge better than most stainless knives. Proudly manufactured with artisan processes for over 90 years, Old Hickory® has stood the test of time and is proven to be the best carbon steel kitchen cutlery sold today.
USE & CARE
Please note that the Old Hickory knives are made with carbon steel. We have been making Old Hickory since the early 1900's. Carbon steel knives require extra care to prevent rusting and oxidation of the surface. Old Hickory should not be placed in a dishwasher or allowed to soak in a sink. We recommend cleaning the blade with a damp sponge or cloth and dry thoroughly. Some people go a step further and apply a light coating of vegetable oil to the blades surface. If your blade shows signs of rust, use some steel wool to remove it and then apply some oil to the blade. To keep the blade razor sharp, use a honing steel, sometimes referred to as sharpening steel, or sharpening stick. After years of use, the steel blade will develop a patina, a darkening which is desirable and an indication of its age. Old Hickory knives are durable and affordable, but do require special care.
USA
-
Old Hickory HOP Knife
$13.97Old Hickory 7" HOP knife features high carbon steel blade. Full tang construction. Genuine hickory handle. 11 3/4" overall. Made by Ontario Knife Company USA. NOTE: Old Hickory knives are produced from the finest High Carbon Cutlery Steel. For best results, hand wash and dry completely to prevent rusting. With continued use, blade may tarnish - your guarantee of Genuine High Carbon Steel. Tarnishing will NOT affect the blade's cutting efficiency.