KNIVES

The Spyderco Counter Puppy is a high quality small kitchen paring knife.  It would also serve well as a steak knife.  The Counter Puppy may very well become your go to knife in the kitchen.

  7" (17.78cm) overall. 3.5" (8.89cm) satin finish 7Cr17MoV stainless blade. Blue plastic handle. Novel design allows the knife to stand upright on a counter or tabletop.  Dishwasher safe.

PRC

Since its introduction in 2011, Michael Janichs Yojimbo 2 design has earned a respected place in Spydercos product line and legions of devoted followers worldwide. The YoJumbo builds on that success, scaling the design up by over 20 percent and refining its ergonomics to accommodate a wider range of hand sizes. Its formidable four-inch (102mm) Wharncliffe blade is hollow ground for superior edge geometry and features a fully accessible Trademark Round Hole for swift, ambidextrous, one-handed opening. The handles open-backed construction and nested, skeletonized stainless steel liners keep weight to a minimum, while its coarse-textured G-10 scales promote a positive, non-slip grip. A high-strength Compression Lock and four-position pocket clip complete the package, making the YoJumbo a truly formidable cutting tool optimized for personal-defense carry. Specs: Overall Length: 9.29" Blade Length: 3.98" Blade Thickness: 0.145" Blade Steel: Satin CPM-M4 Blade Grind: Hollow Lock Type: Compression Opener: Spyderco Round Hole Weight: 5.3 oz Pocket Clip: 4 position Handle: Jade G-10 USA

The SpyMyto™ is a truly unique folding knife that was inspired by the lionSTEEL® Myto™ and is produced by lionSTEEL exclusively for Spyderco. Its hollow-ground, drop-point blade is crafted from M398—an enhanced version of Böhler-Uddeholm’s M390 capable of achieving extremely high hardness and wear resistance. In addition to a fully accessible Trademark Round Hole, the blade features a removable flipper opener, ball bearing pivot washers, and a beautifully radiused spine. The SpyMyto’s handle consists of a linerless green Micarta scale on one side and a solid titanium scale on the other. The latter forms the foundation of the knife’s stout Reeve Integral Lock (R.I.L.) mechanism, which includes a hardened steel interface/overtravel stop. Both scales have painstakingly machined textured chamfers and are joined by a carbon fiber backspacer. A reversible deep-pocket clip mounts to the butt end of the handle to provide left or right-side tip-up carry. This stunning knife is being released as a Flash Batch—a distinctive, one-of-a-kind expression of a model that has not been previously released. Every knife will be individually serialized with discreetly placed laser engraving.  Limited production of 2000.

SPECS:

--Overall Length:  7.77" 

--Blade Length:  3.32" 

--Steel:  Bohler M398

--Closed Length:    4.45" 

--Weight:  3.6oz

--Blade Thickness:  0.157" 

--Clip Position:  Ambi

--Tip Carry Position:  Tip-Up

--Lock:  R.I.L. 

--Blade Grind:  Hollow

Italy

The smaller - more compact Para 3 features a full flat grind plain edge satin finished 3" blade of CPM CRUWEAR steel. Brown unpolished Canvas Micarta scales over stainless liners. Compression lock. Drilled and tapped on all four corners for tip-up, tip-down left or right side carry. 4 1/4" closed. USA

NOTE:  CRUWEAR is not a stainless steel.  While considered by many to be a superior pocket knife steel, it will stain and corrode.  Keep blade clean, dry and lightly oiled to help preserve the finish.

Originally introduced in 1992, the Catcherman was a folding fillet knife specifically designed to meet the needs of discriminating fishermen. One of our last models to feature an integral molded pocket clip, it also became a cult classic among serious Spyderco collectors. This limited-edition Sprint Run resurrects this unique design in a form that is distinctly different from all its predecessors. For the first time, its thin blade is full-flat ground and showcases ultra-corrosion-resistant LC200N steel. The partially serrated CombinationEdge™ blade is paired with a one-piece fiberglass-reinforced-nylon (FRN) handle injection molded in the signature bright green of our LC200N lightweight models. It faithfully includes the original Volcano Grip™ texture pattern on one side and an integral pocket clip on the other to provide right-side, tip-up carry.

SPECIFICATIONS:

Overall Length:  10.43" 

--Blade Length:  4.64" 

--Steel:  LC200N

--Closed Length:  5.92" 

--Edge Length:  4.35" 

--Weight:  2.8oz 

--Blade Thickness:  0.07"  

--Handle:  Green FRN

--Clip Position:  Right Tip 

--Carry Position:  Tip-Up

--Lock Type:  Back Lock

--Grind:  Full-Flat

Seki-City

ON ORDER - CLICK THE NOTIFY ME BUTTON TO GET AN EMAIL WHEN AVAILABLE.  WE SHOULD GET MULTIPLE SHIPMENTS OF THIS DESIRABLE SPRINT RUN 

This unique, limited-edition expression of the Military 2 proudly showcases Crucible CPM S90V blade steel and stunning carbon fiber handle scales. CPM S90V’s advanced alloy composition promotes the formation of hard vanadium carbides instead of chromium carbides, enhancing the steel’s wear resistance while leaving more free chromium available for superior corrosion resistance. The full-flat-ground PlainEdge blade of this elite knife takes full advantage of these qualities to deliver unparalleled cutting performance. It is housed in a handle featuring solid carbon fiber scales with a subtle peel-ply texture for a secure grip. Stainless steel liners nested within the scales provide superior structural strength and form the foundation of the knife’s high-strength Compression Lock mechanism. They also anchor its four-position pocket clip, which supports ambidextrous tip-up or tip-down carry.

SPECIFICATIONS:

--Overall Length:  9.51" (242mm)

--Blade Length:  4.00" (102mm)

--Steel:  CPM S90V(420V)

--Closed Length:  5.51" (140mm)

--Edge Length:  3.65" (93mm)

--Weight:  4.4oz (124g)

--Blade Thickness:  0.145"  

--Handle:  Carbon Fiber

--Clip Position:  AmbiTip 

--Carry Position:  4-positionL

-Lock Type:  Compression

--Grind:  Full-Flat

USA

Spyderco C101PYL2 Manix 2. A recipe for folding knife success: Start with hard-use rated lock. Add a blade made of Premium Magnacut steel. Manufacture it in Golden, Colorado using precise tolerances then add a healthy dash of American innovation. These ingredients are the Manix 2; a concoction of solo features and when combined, make one of the strongest knives from Spyderco to date. Patented by Spyderco, the Manix 2 has a Ball Bearing Lock. It's a hardened free-floating ball bearing contained in a custom hi-tech polymer cage. The round ball bearing allows the lock to self adjust across a large surface, smoothly and consistently locking-up with solid confidence. Evolving over time, the Ball Bearing Lock's strength withstands hard work with a secure, versatile and comfortable grip. Ergonomics are peerless in this design. The blade is Premium Magnacut steel and flat-ground with aggressive thumb serrations (jimping) above a super sized 14mm Spyderco Round Hole. The jimping doesn't stop there. With full steel liners, the scales have jimping that extends beyond the Yellow FRN handle scales scalloping areas of the handle's perimeter. This one is not slipping out of your hand and works well with gloves on. The liners pull double purpose by adding rigidly and lightweight strength to the handle. A three-screw clip is left/right-hand carry, positioned for comfort and deep pocket carry. The knife also has a large lanyard pipe to protect various types of cords or thongs. Blade length: ~ 3 1/3" Closed length: ~4 5/8"  USA

Since its introduction in 2011, Michael Janichs Yojimbo 2 design has earned a respected place in Spydercos product line and legions of devoted followers worldwide. The YoJumbo builds on that success, scaling the design up by over 20 percent and refining its ergonomics to accommodate a wider range of hand sizes. Its formidable four-inch (102mm) Wharncliffe blade is hollow ground for superior edge geometry and features a fully accessible Trademark Round Hole for swift, ambidextrous, one-handed opening. The handles open-backed construction and nested, skeletonized stainless steel liners keep weight to a minimum, while its coarse-textured G-10 scales promote a positive, non-slip grip. A high-strength Compression Lock and four-position pocket clip complete the package, making the YoJumbo a truly formidable cutting tool optimized for personal-defense carry. Specs: Overall Length: 9.29" Blade Length: 3.98" Blade Thickness: 0.145" Blade Steel: Black M4 Blade Grind: Hollow Lock Type: Compression Opener: Spyderco Round Hole Weight: 5.3 oz Pocket Clip: 4 position Handle: Jade G-10 USA

Spyderco C258GFBLP Stretch 2 XL. Blue Nishijin glass fiber handle scales. D.P.S. 15 Damascus Plain Edge Blade.

This elite Stretch 2 XL is big enough for the job, but light enough to carry every day without weighing you down.

--Blade Length: 3.92"

--Closed Length: 4.97"

--Overall Length: 8.85"

--Blade Steel: D.P.S. 15 Damascus - VG-10 core flanked by two pieces of 15-layer damascus.

--Blade Finish: Damascus

--Blade Grind: Full Flat

--Blade Edge: Plain Edge

--Handle Material: Blue Nishijin glass fiber.

--Drilled and tapped on all four corners for left or right side tip-up or tip-down carry.

--Pocket Clip

--Lockback

Seki City

Pre-owned:

Spyderco C79PSBK2 Early production (AD - 01/2004) Assist.  Features a 3 5/8" 80% serrated wharncliffe style rescue blade. Thumb hole opener.  Hood on blade for thumb opening.  Handle incorporates a rescue whistle.  Mid-lockback with Boye Dent.  Reversible wire pocket clip for right or left side tip-up carry.  

5" 

Seki City.

Knife is in excellent condition.  No signs of use or carry.  Original factory edge.  Original box.  We sold this knife new to a collector who took it home and put it in a safe until now.

NOTE:  While in excellent condition, be advised we obtained this from a collector, so please consider it used.

Spyderco Endura 4 Lightweight Sprint Run Full Flat Ground with Bright Blue FRN Handle Scales First produced in the 1980's, the Spyderco Endura was one of the first knives to feature a pocket clip and it's light weight made it easier to carry than the sheath knives that were typical then. Now in it's 4th generation, the Delica has been tweaked and improved so now there are variations to meet nearly any users needs. The Endura 4 lightweight is distinguished by its skeletonized steel liners and fiberglass reinforced nylon (FRN) handle. This variant features a full flat ground plain edge blade of  black titanium carbonitride (TiCN)  S335VN stainless steel.   Obverse of blade marked with serial number, TNP (for "The Nutnfancy Project) and date of 12/2021.  The blade locks via a sturdy back lock that provides a secure lock up and allows for easy lock release with either hand. The FRN handles on the Endura 4 Lightweight feature Bi-Directional Texturing for a secure grip, and a hourglass pocket clip that can be mounted on the left or right side in the tip up or tip down position. Specs: Weight: 3.4 ounces Overall Length: 8.75 inches Blade Length: 3.75 inches Blade Steel:  S35VN Blade Thickness: .125 inches Blade Shape: Modified Drop Point Blade Grind: Full Flat Blade Finish: Black TiCN coated.  Handle Material: Bright Blue FRN 

Hardware:  All Black Lock Type: Back Lock Opening Mechanism: Round Hole Pocket Clip: Reversible, Tip Up/Down Country of Origin: Japan

Spyderco Endura Sprint Run.  Features a unique blade of  V-Toku2 tool steel flanked by SUS410 outer layers.  Blue/Gray FRN Handle.  Drilled and tapped on all four corners for tip-up, tip-down right of left side carry.  5" closed.

Seki City 

Spyderco C10ZFPOR Endura 4 Spyderco Endura 4 Flat Ground  HAP 40 core flanked by SUS410 martensitic stainless Plain Edge blade. Zome Orange handle. Features three-dimensional FRN handles with Volcano grip, nested steel liners and four-way pocket clips. Flat ground blade, and the David Boye dent on the lockback round out this knife.  Clip: Stainless steel Reversible ambidextrous. Edge Type: Plain Edge. Blade Length: 3 7/8". Length Overall: 8 3/4". Seki City. NOTE: As each handle is individually hand crafted with the Zome coloration, each knife will vary slightly in coloration.

Seki City

Spyderco C179PBK Spy-DK.  Features a 2 5/8" flat ground plain edge blade of N690Co steel.  Slipjoint design.  Black FRN handles.  Wire pocket clip for right or left side tip-up carry.  3 5/8" closed.

Italy 

PRE-OWNED - Local customer purchased this a few days ago - returned it because of other financial responsibilities.  Great chance to get an unused SpyOpera Damascus at big savings to you.  Knife is MINT.  No signs of carry or used.  Original factory edge.  All factory papers and original padded zippered pouch included.

Spyderco C255CFPD Sprint Run SpyOpera.

Features a 2.9" Thor pattern martensitic Damascus steel.  Smooth radiused Carbon Fiber handle scales over dual titanium liners and backspacer.  Mid-Lockback design.  Stainless wire pocket-clip reversable for right or left side tip-up carry.

4" closed.  2.7oz.

Italy