KNIVES

Ti-Lite tactical folders evoke the sleek speed and rebellious lines of the classic 1950's-styled switchblade. Unlike most switchblades however, they are legal to carry nearly everywhere. They feature American S35VN Alloy blades with DLC (Diamond Like Coating), razor sharp edges and sturdy, needle sharp points. The handles are made of high quality G-10. And for maximum strength and safety, Cold Steel has equipped the Ti-Lites with their patent pending, stainless steel leaf spring locks (proven, in their tests, to hold 130 lbs). For ease of carry, the Ti-Lites come equipped with a small, but unobtrusive steel pocket clip, and can be opened rapidly by using the thumb studs or by snagging a quillon on the edge of your pocket as you draw your knife out. We are grateful to custom knife maker, Phil Boguszewski, for his design influence and help in the creation of the Ti-Lites.

SPECIFICATIONS:--Weight: 7.1oz --Blade Thickness: 4mm --Blade Length: 6" --Blade Steel: S35VN w/ Black DLC Coating 

--Handle Length/Material: 4-3/4" G-10 --Overall Length: 13" 

Taiwan

Direct from Crawford, this custom Leopard Cub features a 2 3/4" satin finished hollow ground blade of S30V stainless steel.  Blasted titanium handles with fileworked backspacer. Single thumbstud.  Linerlock.  Blasted Titanium pocket clip.

3 3/4" closed.

Custom hand made in USA

Introducing the tried-and-true KA-BAR Fighting/Utility Knife to a post-orbital world. Made with battle-tested 1095 Cro-Van steel, the blade has a grey powder coating and is marked USSF and KA-BAR. The handle is blue Kraton G® and is carried in a grey hard plastic sheath that is MOLLE-compatible. Made in Olean, NY, USA, Earth. SPECIFICATIONS: --WEIGHT: 0.65 lb --BLADE TYPE: Fixed Blade --BLADE LENGTH: 7 inches --OVERALL LENGTH: 11.75 inches --EDGE ANGLES: 20 degree --SHAPE: Clip Point --TANG STAMP: USSF/KA-BAR --KNIFE MATERIAL: 1095 Cro-Van --GRIND: Flat --HANDLE MATERIAL: Blue Kraton G --ROCKWELL HARDNESS: 56-58 --BUTT CAP/GUARD: Yes --KNIFE COUNTRY OF ORIGIN: United States US flag --SHEATH COUNTRY OF ORIGIN: Taiwan

LT Wright Frontier First fixed blade.  Features a 2 3/4" saber ground blade of O1 steel.  Back of spine sharpened for use with fire starter (not included).   Matte Maple Paper Micarta handles with black liners over full tang construction,  5 1/2" closed.

USA

The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II.  This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.

SPECIFICATIONS:

--Overall Length: 12"

--Blade Length: 7"

--Blade Thickness: 3/16"

--Blade Steel: SK5

--Blade Hardness: 58-60 HRC

--Blade Style: Fixed double edge dagger symmetrical blade

--Coating: Black Powder Coat

--Sheath: Black Plastic injection molded Sheath with nylon hanger

--Weight: 0.444 LBS (Knife)

Taiwan --Be advised, some jurisdictions have restrictions on double edge blades.  Be sure of your laws as they apply.

Ontario Mark 3 Model O Navy Dive Knife This knife is used exclusively by U.S. Naval Forces. Ontario Knife Company has produced the this knife for many decades and it has seen combat with U.S. armed forces. Needless to say, these veteran blades are not in the business of giving quarter.FEATURES AND SPECIFICATIONS:--BLADE COLOR: Black--BLADE FINISH: Black Oxide--BLADE GRIND: Flat Bevel w/ Secondary Flat Bevel--BLADE LENGTH: 6.0 in (15.2 cm)--BLADE MATERIAL: Stainless Steel--BLADE THICKNESS: 0.165 in (0.419 cm)--EDGE TYPE: Plain--HANDLE COLOR: Black--BLADE HARDNESS: 49-54 HRC--NATIONAL STOCK NUMBER: 1095-00-391-1056--OVERALL LENGTH: 11.1 in (28.2 cm)s--SHEATH: Black Molded Plastic--SHEATH TYPE: Belt Clip--Weight: 1.2 (Lbs)--UPC: 071721-0-6141-0 Made in the USA

Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.

  The most famous fixed blade knife in the World.  The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC.  Hard plastic MOLLE compatible sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  USMC--NSN:  1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches--KNIFE:  USA --SHEATH:  Taiwan

Simply put, the Cold Steel SRK (Survival Rescue Knife) was designed specifically with this in mind. A popular knife with Military and Tactical Law Enforcement Personnel, the SRK is the standard issue knife of the Navy SEALS for their BUDS - or Basic Underwater Demolition training - the SRK has proved its worth time and time again in the most demanding environments. Whatever the mission, we're confident that the SRK is the knife for you!

SPECIFICATIONS:

--Weight: 8.2oz 

--Blade Thickness: 5mm 

--Blade Length: 6" 

--Blade Steel: SK-5 High Carbon w/ Black Tuff-Ex™ Finish 

--Handle Length: 4-3/4" 

--Handle Material:  Desert Tan Kray-Ex™ --Overall Length: 10-3/4" 

--Includes Secure-Ex® Sheath

Taiwan

Spyderco FB14P6 Swick 6 Plain edge is a Fred Perrin inspired Sal Glesser designed small fixed blade carry option.  Features a 2 3/4" plain edge blade of LC200N ultra-corrosion resistant stainless steel.  Black peal-ply G-10 handle scales.  Black Boltaron sheath with multi-position G-Clip and ball chain for multiple carry options.  5.87" overall.  USA

Special run Spyderco C223PORBK Para 3 with Orange FRN handles and a flat ground plain edge black CTS-HXP blade.

Compression Lock. Wire pocket clip reversable for right of left side tip-up carry.   All black hardware.

Blade Length:  2 7/8"

4 1/4" closed.

This knife bears a collector club number.

USA

Special Run Spyderco C223MCFLMXP Para 3 with marbled carbon fiber handle scales and Uddeholm Elmax SuperClean steel flat ground plain edge blade.

Handle is drilled and tapped on all four corners for right of left side tip-up or tip-down carry.  Compression Lock.

Blade length: 2 7/8"

4 1/4" closed.

This knife bears a collector club number.

USA

Spyderco C261P UpTern. The UpTern features a 2 3/4" full flat ground plain edge blade of 8Cr13MoV Stainless Steel. Brushed Stainless Steel Handles. Pocket clip. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry. Mid-lockback design. 3 3/4" closed. PRC

Spyderco C136PBBK Persistance
Black Blade Plain Edge
The Spyderco Persistance C136PBBK features a black 2 3/4" flat ground plain edge leaf blade of 8Cr13MoV stainless steel.
Black FRN Handles. Dual black skeletonized liners. Black Stainless pocket clip. Drilled and tapped on all four corners for tip-up, tip-down, left or right side carry. Linerlock. Thumb jimping on blade.
4 1/8" closed.
PRC

Made in China

The Buck 150BLS Hookset 6" Saltwater Cleaver features a sturdy 6" gray Titanium coated 5Cr15MoV Stainless blade. Blue and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC