KNIVES

The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II.  This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.

SPECIFICATIONS:

--Overall Length: 12"

--Blade Length: 7"

--Blade Thickness: 3/16"

--Blade Steel: SK5

--Blade Hardness: 58-60 HRC

--Blade Style: Fixed double edge dagger symmetrical blade

--Coating: Black Powder Coat

--Sheath: Black Plastic injection molded Sheath with nylon hanger

--Weight: 0.444 LBS (Knife)

Taiwan --Be advised, some jurisdictions have restrictions on double edge blades.  Be sure of your laws as they apply.

The Monitor blends tactical cutting ability with everyday carry convenience. Manual KVT ball bearings create smooth opening, and the ultra-reliable DuraLock secures the blade. Complete cutting tasks using the piercing spear point and slicey D2 tool steel edge with a flat grind. Grip the textured handle for greater control and pull back on the ambidextrous DuraLock to safely close the blade. Finally, it includes a reversible extra-deep-carry pocket clip for easy carry. Despite its smaller size, the Monitor packs a punch.

FEATURES:--Everyday carry knife; all-black, tactical look--DuraLock secures the blade open using a solid steel crossbar; pull the ambidextrous lock back to safely close the knife--D2 high-carbon tool steel is highly wear resistant, tough, offers excellent edge retention; black-oxide finish--Opens easily with KVT ball-bearing system and a flipper--Extra deep-carry pocketclip is easily reversible for left/right carry; lanyard hole

SPECIFICATIONS:--Blade Length:  3 in. (7.6 cm)--Blade Material:  D2--Blade Finish/Coating:  Black-oxide coating--Blade Thickness:  0.09 in. (2.3 mm)--Closed Length:  4.2 in. (10.7 cm)--Handle Material:  Glass-filled nylon--Handle Thickness:  0.49 in. (12.4 mm)--Overall Length:  7.2 in. (18.3 cm)--Weight:  2.7 oz. (77 g)

PRC

Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.

  The most famous fixed blade knife in the World.  The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC.  Hard plastic MOLLE compatible sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  USMC--NSN:  1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches--KNIFE:  USA --SHEATH:  Taiwan

Spyderco C60GPGY Sprint Run Massad Ayoob Lockback.  Features a 3 3/4" satin finished plain edge blade of CPM CRUWEAR.  Gray peel-ply textured G-10 Handle scales over skeletonized steel liners.  Mid-Lockback design with Boye Dent.  Drilled and tapped on all four corners for right or left side tip-up or tip-down carry.

5" closed.

Seki City Japan

Joe Flowers designed Condor 232-3HC Mini Bushlore Knife.

A compact and stout bush knife, the mini is easy to carry and still provides size and strength for many field and camp applications.

SPECIFICATIONS:

--BLADE:  3 in (76,5 mm)

--OAL:  6.5 in (165 mm)

--BLADE THICKNESS:  0,1 in (3 mm)

--WEIGHT:  2.9 oz (82 g)

--BLADE MATERIAL:  1075 High Carbon Steel

--FINISH:  Blasted Satin

--GRIND:  Scandi

--HANDLE:  Walnut

--SHEATH:  Hand Crafted Welted Leather

El Salvador

Spyderco C41PGR5 Native 5 Salt.  Featues a 3" flat ground plain edge blade of LC200N stainless steel.  Green FRN Handles.  Pocket Clip.  Drilled and tapped on all four corners for right or left side tip-up or tip-down carry.  Mid-Lockback design with Boye Dent.  4" closed.  USA

LT Wright Frontier Valley Fixed Blade. Features a 3" flat ground blade of A2 steel. Matte finished Black and Blue G-10 handle scales. 6 1/2" Overall. Leather sheath.

Civivi C803G Praxis Flipper Linerlock - Black 9Cr18MoV plain edge blade - Coarse Black Micarta handle scales.

DETAILED SPECIFICATIONS:--Overall Length: 8.45" / 214mm--Width: 1.57" / 39.8mm--Overall Height(Include Clip): 0.74''/18.9mm--Blade Length: 3.75" / 95mm--Closed Length: 4.70" / 119mm--Blade Thickness: 0.12" / 3mm--Handle Thickness: 0.51" / 13mm--Weight: 4.11oz / 116.5g--Blade Material: 9Cr18MoV--Blade Hardness: 57-59HRC--Blade Grind: Flat--Blade Finish: Black Stonewashed--Handle Material: Coarse Micarta--Handle Color/Finish: Black--Back Spacer Material: G10--Back Spacer Color/Finish: Black --Liner Material: Stainless Steel--Liner Color/Finish: Black--Country of Origin: PRC

Case XX 64661 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Red Anodized Aluminum Handles..
Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.
This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Red Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.
--Closed Length: 4.75"
Made in the USA at the Case Factory

Case XX 64660 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Blue Anodized Aluminum Handles..
Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.
This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Blue Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.
--Closed Length: 4.75"
Made in the USA at the Case Factory

Originally designed from the Finnish sami knife, used by the Laplanders for all their hunting and bushcraft tasks. These knives have traditionally been flat ground, single or double sided, with a "zero-ground" edge ground to the edge.

It occurred to TOPS that a good idea is still a good idea in a smaller package. The Mini Scandi was a result of the very popular, original Brothers of Bushcraft (BROS-01) knife. It offers all the advantages of a modified Scandi grind in a neck knife, which makes it easily concealable. All of the cutting ability of a larger Scandi that can also fit in your pocket or pack.
SPECIFICATIONS:--Overall Length: 6.13"--Blade Thickness: 0.130"--Hardness: RC 56-58--Blade Finish: Black Traction Coating--Handle Material: Tan Canvas Micarta--Weight w/ Sheath: 3.8oz--Sheath Included: Yes--Sheath Material: Black Kydex--Designer: Leo Espinoza. USA