KNIVES

The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II.  This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.

SPECIFICATIONS:

--Overall Length: 12"

--Blade Length: 7"

--Blade Thickness: 3/16"

--Blade Steel: SK5

--Blade Hardness: 58-60 HRC

--Blade Style: Fixed double edge dagger symmetrical blade

--Coating: Black Powder Coat

--Sheath: Black Plastic injection molded Sheath with nylon hanger

--Weight: 0.444 LBS (Knife)

Taiwan --Be advised, some jurisdictions have restrictions on double edge blades.  Be sure of your laws as they apply.

Cold Steel 20PBS Peace Maker III Fixed Blade Knife.

If you're in the Military or Law Enforcement; if you ride horses or motorcycles; or live on a ranch or a farm - then the Cold Steel Peace Maker is for you! Clipped to the top of your boot and covered by your pant leg, these versatile fixed blades are rendered virtually invisible; furthermore, your knife is always easily accessible when you need it. The Peace Makers are astoundingly light and substantially thinner than many of the tactical knives available on the market today. The Peace Makers compound-ground blade bevels makes them very easy to re-sharpen, and their stiff, distal tapered points are capable of piercing even thick material.As these inexpensive boot blades offer a wide spectrum of uses - utility, hunting, fishing, emergency rescue and survival and of course self-defense and our ambidextrous polymer sheaths with custom-made, stainless steel belt clips make them effortless to carry. SPECIFICATIONS:--Weight: 3.4oz --Blade Thickness: 2.5mm --Blade Length: 4in --Blade Steel: German 4116 Stainless Cryo Quenched --Handle Length/Material: 4-1/2in Kray-Ex --Overall Length: 8-1/2in --Additional Features: Secure-Ex® Sheath  Imported

Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.

  The most famous fixed blade knife in the World.  The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC.  Hard plastic MOLLE compatible sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  USMC--NSN:  1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches--KNIFE:  USA --SHEATH:  Taiwan

Spyderco C60GPGY Sprint Run Massad Ayoob Lockback.  Features a 3 3/4" satin finished plain edge blade of CPM CRUWEAR.  Gray peel-ply textured G-10 Handle scales over skeletonized steel liners.  Mid-Lockback design with Boye Dent.  Drilled and tapped on all four corners for right or left side tip-up or tip-down carry.

5" closed.

Seki City Japan

LT Wright Bushcrafter HC Fixed Blade Field Knife. Features a 4" high saber ground blackened blade of 1075 steel. Matte Black Micarta handles. 8 1/2" Overall. Leather sheath with Ferro Rod loop (rod not included) and belt dangler.

USA

Civivi C803G Praxis Flipper Linerlock - Black 9Cr18MoV plain edge blade - Coarse Black Micarta handle scales.

DETAILED SPECIFICATIONS:--Overall Length: 8.45" / 214mm--Width: 1.57" / 39.8mm--Overall Height(Include Clip): 0.74''/18.9mm--Blade Length: 3.75" / 95mm--Closed Length: 4.70" / 119mm--Blade Thickness: 0.12" / 3mm--Handle Thickness: 0.51" / 13mm--Weight: 4.11oz / 116.5g--Blade Material: 9Cr18MoV--Blade Hardness: 57-59HRC--Blade Grind: Flat--Blade Finish: Black Stonewashed--Handle Material: Coarse Micarta--Handle Color/Finish: Black--Back Spacer Material: G10--Back Spacer Color/Finish: Black --Liner Material: Stainless Steel--Liner Color/Finish: Black--Country of Origin: PRC

Case XX 64661 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Red Anodized Aluminum Handles..
Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.
This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Red Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.
--Closed Length: 4.75"
Made in the USA at the Case Factory

Case XX 64660 Kinzua Flipper with Stonewashed S35VN Plain Edge Spear Point Blade and Blue Anodized Aluminum Handles..
Case has hit a homerun moving into the 21st Cenrury with the new modern EDC - the Kinzua.
This version features a plain edge Spear Point blade of Premium S35VN Stainless Steel that rides easily on a steel ball-bearing pivot. The Handle is sleek Blue Anodized Aluminum. One handed Flip-open design with a finger flipper. Super strong framelock with steel insert for security when using the Kinzua for heavy chores. Reversable Deep Carry pocket clip.
--Closed Length: 4.75"
Made in the USA at the Case Factory

Rough Ryder 1985 Fixed Blade Hunter. Features a 4" hollow ground plain edge blade. Brown sculpted wood handle. Full tang construction. Black nylon belt sheath with hardshell insert. 8 1/2" overall PRC

Old Hickory 7" Kitchen Butcher Knife.

First introduced in 1924, the Old Hickory® knives are the most venerable product line still in active production. The Old Hickory® knives feature a hardwood handle secured with brass compression rivets to 1075 carbon steel blades that are both very sharp and capable of retaining an edge better than most stainless knives. Proudly manufactured with artisan processes for over 90 years, Old Hickory® has stood the test of time and is proven to be the best carbon steel kitchen cutlery sold today.

USE & CARE

Please note that the Old Hickory knives are made with carbon steel.  We have been making Old Hickory since the early 1900's.  Carbon steel knives require extra care to prevent rusting and oxidation of the surface.  Old Hickory should not be placed in a dishwasher or allowed to soak in a sink.  We recommend cleaning the blade with a damp sponge or cloth and dry thoroughly.  Some people go a step further and apply a light coating of vegetable oil to the blades surface. If your blade shows signs of rust, use some steel wool to remove it and then apply some oil to the blade.   To keep the blade razor sharp, use a honing steel, sometimes referred to as sharpening steel, or sharpening stick. After years of use, the steel blade will develop a patina, a darkening which is desirable and an indication of its age.  Old Hickory knives are durable and affordable, but do require special care. 

USA

Old Hickory 7"  Kitchen Cleaver  

First introduced in 1924, the Old Hickory® knives are the most venerable product line still in active production. The Old Hickory® knives feature a hardwood handle secured with brass compression rivets to 1075 carbon steel blades that are both very sharp and capable of retaining an edge better than most stainless knives. Proudly manufactured with artisan processes for over 90 years, Old Hickory® has stood the test of time and is proven to be the best carbon steel kitchen cutlery sold today.

USE & CARE

Please note that the Old Hickory knives are made with carbon steel.  We have been making Old Hickory since the early 1900's.  Carbon steel knives require extra care to prevent rusting and oxidation of the surface.  Old Hickory should not be placed in a dishwasher or allowed to soak in a sink.  We recommend cleaning the blade with a damp sponge or cloth and dry thoroughly.  Some people go a step further and apply a light coating of vegetable oil to the blades surface. If your blade shows signs of rust, use some steel wool to remove it and then apply some oil to the blade.   To keep the blade razor sharp, use a honing steel, sometimes referred to as sharpening steel, or sharpening stick. After years of use, the steel blade will develop a patina, a darkening which is desirable and an indication of its age.  Old Hickory knives are durable and affordable, but do require special care. 

USA

Introducing the tried-and-true KA-BAR Fighting/Utility Knife to a post-orbital world. Made with battle-tested 1095 Cro-Van steel, the blade has a grey powder coating and is marked USSF and KA-BAR. The handle is blue Kraton G® and is carried in a grey hard plastic sheath that is MOLLE-compatible. Made in Olean, NY, USA, Earth. SPECIFICATIONS: --WEIGHT: 0.65 lb --BLADE TYPE: Fixed Blade --BLADE LENGTH: 7 inches --OVERALL LENGTH: 11.75 inches --EDGE ANGLES: 20 degree --SHAPE: Clip Point --TANG STAMP: USSF/KA-BAR --KNIFE MATERIAL: 1095 Cro-Van --GRIND: Flat --HANDLE MATERIAL: Blue Kraton G --ROCKWELL HARDNESS: 56-58 --BUTT CAP/GUARD: Yes --KNIFE COUNTRY OF ORIGIN: United States US flag --SHEATH COUNTRY OF ORIGIN: Taiwan