KNIVES

Since its introduction in 2011, Michael Janichs Yojimbo 2 design has earned a respected place in Spydercos product line and legions of devoted followers worldwide. The YoJumbo builds on that success, scaling the design up by over 20 percent and refining its ergonomics to accommodate a wider range of hand sizes. Its formidable four-inch (102mm) Wharncliffe blade is hollow ground for superior edge geometry and features a fully accessible Trademark Round Hole for swift, ambidextrous, one-handed opening. The handles open-backed construction and nested, skeletonized stainless steel liners keep weight to a minimum, while its coarse-textured G-10 scales promote a positive, non-slip grip. A high-strength Compression Lock and four-position pocket clip complete the package, making the YoJumbo a truly formidable cutting tool optimized for personal-defense carry. Specs: Overall Length: 9.29" Blade Length: 3.98" Blade Thickness: 0.145" Blade Steel: Satin CPM-M4 Blade Grind: Hollow Lock Type: Compression Opener: Spyderco Round Hole Weight: 5.3 oz Pocket Clip: 4 position Handle: Jade G-10 USA

The SpyMyto™ is a truly unique folding knife that was inspired by the lionSTEEL® Myto™ and is produced by lionSTEEL exclusively for Spyderco. Its hollow-ground, drop-point blade is crafted from M398—an enhanced version of Böhler-Uddeholm’s M390 capable of achieving extremely high hardness and wear resistance. In addition to a fully accessible Trademark Round Hole, the blade features a removable flipper opener, ball bearing pivot washers, and a beautifully radiused spine. The SpyMyto’s handle consists of a linerless green Micarta scale on one side and a solid titanium scale on the other. The latter forms the foundation of the knife’s stout Reeve Integral Lock (R.I.L.) mechanism, which includes a hardened steel interface/overtravel stop. Both scales have painstakingly machined textured chamfers and are joined by a carbon fiber backspacer. A reversible deep-pocket clip mounts to the butt end of the handle to provide left or right-side tip-up carry. This stunning knife is being released as a Flash Batch—a distinctive, one-of-a-kind expression of a model that has not been previously released. Every knife will be individually serialized with discreetly placed laser engraving.  Limited production of 2000.

SPECS:

--Overall Length:  7.77" 

--Blade Length:  3.32" 

--Steel:  Bohler M398

--Closed Length:    4.45" 

--Weight:  3.6oz

--Blade Thickness:  0.157" 

--Clip Position:  Ambi

--Tip Carry Position:  Tip-Up

--Lock:  R.I.L. 

--Blade Grind:  Hollow

Italy

Benchmade 15505 Meatcrafter field and kitchen knife.

  When your adventures afield transition to the kitchen, the right cutting tool will make all the difference. The Benchmade 15505 Meatcrafter is a hybrid hunting fixed blade with a fine, smooth edge to trim, debone, or slice your preferred cuts of meat. Featuring Benchmade’s new SelectEdge technology, the 28 inclusive edge angle on CPM-154 stainless steel provides the perfect balance of a fine grain, sharp edge with carefully engineered blade flex. This knife makes just as much sense in the back of your truck as it does in the kitchen drawer.

FEATURES:

--Blade Edge:  Plain

--Blade Finish/Color:  BeadBlast

--Blade Steel:  CPM-154 

--Hardness:  (58-61 HRC)

--Blade Style/Shape:  Trailing Point

--Handle Material:  Dark Olive Santoprene

--Lanyard Hole:  Yes

--MOLLE Compatible:  No

--Sheath Type:  Boltaron

SPECIFICATIONS:

--BLADE LENGTH - 4"

--BLADE THICKNESS - 0.09" | 2.286mm

--OVERALL LENGTH - 8.86"

--WEIGHT - 2.71 pz 

--HANDLE THICKNESS - 0.67" | 17.02mm

--Brand:  Benchmade

--Model Name:  Meatcrafter

--Model Number: 15505

--Item Number:  BM15505

--Country of Origin:  USA

A heavy-use folding knife built for tasks in wet environments — from bait prep to cutting lines to scaling small fish — the Adira™ is truly a waterman’s EDC, crafted to support your outdoor lifestyle on and off the water. Featuring a 3.6” drop-point blade made of CPM-MagnaCut stainless steel, this pocket-ready aquatic folder uses an AXIS® Lock mechanism with stainless springs and takes advantage of hi-vis colored details with a useful orange lanyard for easy pocket access. Sure to be any outdoorsman's favorite folder.

SPECS:

--Open Length:  9'' | 22.86cm

--Blade Length:  3.88'' | 9.86cm

--Blade Thickness:  0.114'' | 2.9mm

--Closed Length:  5.12'' | 13.0cm

--Handle Thickness:  0.663'' | 16.84mm

--Mechanism:  AXIS® Lock

--Blade Style:  Drop-Point

--Pocket Clip:  Tip-up Black Oxide Deep Carry

--Blade Finish:  Stonewash polish

--Handle Material:  Depth Blue Grivory®

--Lanyard Hole:  Yes with Lanyard

--Blade Steel:  CPM-Magnacut

--Weight:  4.23oz | 119.92g

USA

The Undercurrent™ is your reliable fixed blade for hard-use utility while on the water. Featuring a sheepsfoot style blade made of CPM-MagnaCut steel with partial serrations for cutting lines, ropes, and bait, the Undercurrent™ is a cinch to clean. Complete with a Sonar Gray molded sheath that mounts on your belt, pack or boat, with push button retention release for quick access, the Undercurrent™ pulls you in with simplicity and performance that can't be matched.

SPECS:

--Overall Length:  9.4353'' | 23.97cm

--Blade Length:  4.321'' | 10.98cm

--Blade Thickness:  0.12'' | 3.05mm

--Handle Thickness:  0.846'' | 21.49mm

--Fixed Blade

--Blade Style:  Sheepsfoot

--Blade Finish:  Stonewash

--Handle Material:  Depth Blue Santoprene®

--Lanyard Hole

--Blade Steel:  CPM-Magnacut

--Blade Edge:  Partially Serrated

--Weight:  5.38oz | 152.52g

USA

In the years since the 535 Bugout® first hit the market, this slim, lightweight and durable folder has redefined EDC style and versatility from the trail to the workplace and everywhere in-between through all of life’s adventures. The 535-12 Bugout® is an instant eye-catcher in easy-to-maintain CPM-S30V premium stainless steel with a Satin finish and earthtone Tan Grivory® handle scales with gold anodized thumb stud and backspacers for that pop of color. The tool in your outdoor kit that you can’t leave behind. Gear up and bug out.

SPECS:

--Blade Length:  3.235"

--Blade Shape:  Drop Point

--Blade Edge:  Plain Edge

--Blade Finish:  Stonewashed

--Handle:  Tan Grivory

--Axis Lock

--Black reversable pocket clip

--Weight:  1.5 oz

--USA

Spyderco C223PYL Para 3 Salt.  Features a 2 7/8" full flat ground satin finished plain edge blade of CPM-MagnaCut stainless steel.  Lightweight Yellow FRN handles.  Compression lock with all black hardware.  Pocket clip reversable for right or left side tip-up carry.  4 1/4" closed.

USA

The smaller - more compact Para 3 features a full flat grind plain edge satin finished 3" blade of CPM CRUWEAR steel. Brown unpolished Canvas Micarta scales over stainless liners. Compression lock. Drilled and tapped on all four corners for tip-up, tip-down left or right side carry. 4 1/4" closed. USA

NOTE:  CRUWEAR is not a stainless steel.  While considered by many to be a superior pocket knife steel, it will stain and corrode.  Keep blade clean, dry and lightly oiled to help preserve the finish.

When Benchmade’s AXIS® lock technology was released on the original 710 back in 1999, it sent more than ripples through the knife industry; it was a tsunami. The innovative AXIS® lock changed the game — all thanks to the designer duo Benchmade collaborated with on the invention, Bill McHenry and Jason Williams, renowned custom knifemakers with watchmaking roots. The sleek, new 710FE-2401 is a testament to McHenry and Williams’ craftwork. Celebrating the 25th Anniversary of AXIS® lock technology, the 710FE-2401 has the same large frame and ample cutting power of the original 710 and features a stylish drop-point, recurved blade made of mighty CPM-Magnacut steel with an FDE PVD finish and black thumb studs. The 710FE-2401 has a lightweight aluminum handle with milled black anodized finish, and milled FDE PVD backspacer and pivot ring. A Limited anniversary variant, inspired by its original designers.

SPECS:

--Open Length:  8.95'' | 22.73cm

--Blade Length:  4'' | 10.16cm

--Blade Thickness:  0.114'' | 2.9mm

--Closed Length:  4.98'' | 12.65cm

--Handle Thickness:  0.557'' | 14.15mm

USA

Originally introduced in 1992, the Catcherman was a folding fillet knife specifically designed to meet the needs of discriminating fishermen. One of our last models to feature an integral molded pocket clip, it also became a cult classic among serious Spyderco collectors. This limited-edition Sprint Run resurrects this unique design in a form that is distinctly different from all its predecessors. For the first time, its thin blade is full-flat ground and showcases ultra-corrosion-resistant LC200N steel. The partially serrated CombinationEdge™ blade is paired with a one-piece fiberglass-reinforced-nylon (FRN) handle injection molded in the signature bright green of our LC200N lightweight models. It faithfully includes the original Volcano Grip™ texture pattern on one side and an integral pocket clip on the other to provide right-side, tip-up carry.

SPECIFICATIONS:

Overall Length:  10.43" 

--Blade Length:  4.64" 

--Steel:  LC200N

--Closed Length:  5.92" 

--Edge Length:  4.35" 

--Weight:  2.8oz 

--Blade Thickness:  0.07"  

--Handle:  Green FRN

--Clip Position:  Right Tip 

--Carry Position:  Tip-Up

--Lock Type:  Back Lock

--Grind:  Full-Flat

Seki-City

PRE-OWNED

Benchmade 31 Bali-Song Butterfly Knife.  Features a 3" plain edge blade of 440C Stainless.  Titanium Handles.  "T" Latch.  Stainless steel pocket clip.  Includes Benchmade Cocoon Sheath.  

Knife is in great condition.  It has been lightly carried and used, showing minor scuffs as to be expected.  Latches strong and flips freely.  No box or paperwork.

NOTE:  While in great condition, except as noted, be advised we obtained this from a collector, so please consider it used.

USA

ON ORDER - CLICK THE NOTIFY ME BUTTON TO GET AN EMAIL WHEN AVAILABLE.  WE SHOULD GET MULTIPLE SHIPMENTS OF THIS DESIRABLE SPRINT RUN 

This unique, limited-edition expression of the Military 2 proudly showcases Crucible CPM S90V blade steel and stunning carbon fiber handle scales. CPM S90V’s advanced alloy composition promotes the formation of hard vanadium carbides instead of chromium carbides, enhancing the steel’s wear resistance while leaving more free chromium available for superior corrosion resistance. The full-flat-ground PlainEdge blade of this elite knife takes full advantage of these qualities to deliver unparalleled cutting performance. It is housed in a handle featuring solid carbon fiber scales with a subtle peel-ply texture for a secure grip. Stainless steel liners nested within the scales provide superior structural strength and form the foundation of the knife’s high-strength Compression Lock mechanism. They also anchor its four-position pocket clip, which supports ambidextrous tip-up or tip-down carry.

SPECIFICATIONS:

--Overall Length:  9.51" (242mm)

--Blade Length:  4.00" (102mm)

--Steel:  CPM S90V(420V)

--Closed Length:  5.51" (140mm)

--Edge Length:  3.65" (93mm)

--Weight:  4.4oz (124g)

--Blade Thickness:  0.145"  

--Handle:  Carbon Fiber

--Clip Position:  AmbiTip 

--Carry Position:  4-positionL

-Lock Type:  Compression

--Grind:  Full-Flat

USA

Spyderco C101PYL2 Manix 2. A recipe for folding knife success: Start with hard-use rated lock. Add a blade made of Premium Magnacut steel. Manufacture it in Golden, Colorado using precise tolerances then add a healthy dash of American innovation. These ingredients are the Manix 2; a concoction of solo features and when combined, make one of the strongest knives from Spyderco to date. Patented by Spyderco, the Manix 2 has a Ball Bearing Lock. It's a hardened free-floating ball bearing contained in a custom hi-tech polymer cage. The round ball bearing allows the lock to self adjust across a large surface, smoothly and consistently locking-up with solid confidence. Evolving over time, the Ball Bearing Lock's strength withstands hard work with a secure, versatile and comfortable grip. Ergonomics are peerless in this design. The blade is Premium Magnacut steel and flat-ground with aggressive thumb serrations (jimping) above a super sized 14mm Spyderco Round Hole. The jimping doesn't stop there. With full steel liners, the scales have jimping that extends beyond the Yellow FRN handle scales scalloping areas of the handle's perimeter. This one is not slipping out of your hand and works well with gloves on. The liners pull double purpose by adding rigidly and lightweight strength to the handle. A three-screw clip is left/right-hand carry, positioned for comfort and deep pocket carry. The knife also has a large lanyard pipe to protect various types of cords or thongs. Blade length: ~ 3 1/3" Closed length: ~4 5/8"  USA

Since its introduction in 2011, Michael Janichs Yojimbo 2 design has earned a respected place in Spydercos product line and legions of devoted followers worldwide. The YoJumbo builds on that success, scaling the design up by over 20 percent and refining its ergonomics to accommodate a wider range of hand sizes. Its formidable four-inch (102mm) Wharncliffe blade is hollow ground for superior edge geometry and features a fully accessible Trademark Round Hole for swift, ambidextrous, one-handed opening. The handles open-backed construction and nested, skeletonized stainless steel liners keep weight to a minimum, while its coarse-textured G-10 scales promote a positive, non-slip grip. A high-strength Compression Lock and four-position pocket clip complete the package, making the YoJumbo a truly formidable cutting tool optimized for personal-defense carry. Specs: Overall Length: 9.29" Blade Length: 3.98" Blade Thickness: 0.145" Blade Steel: Black M4 Blade Grind: Hollow Lock Type: Compression Opener: Spyderco Round Hole Weight: 5.3 oz Pocket Clip: 4 position Handle: Jade G-10 USA

Pre-owned:

Spyderco C79PSBK2 Early production (AD - 01/2004) Assist.  Features a 3 5/8" 80% serrated wharncliffe style rescue blade. Thumb hole opener.  Hood on blade for thumb opening.  Handle incorporates a rescue whistle.  Mid-lockback with Boye Dent.  Reversible wire pocket clip for right or left side tip-up carry.  

5" 

Seki City.

Knife is in excellent condition.  No signs of use or carry.  Original factory edge.  Original box.  We sold this knife new to a collector who took it home and put it in a safe until now.

NOTE:  While in excellent condition, be advised we obtained this from a collector, so please consider it used.

Spyderco Endura 4 Lightweight Sprint Run Full Flat Ground with Bright Blue FRN Handle Scales First produced in the 1980's, the Spyderco Endura was one of the first knives to feature a pocket clip and it's light weight made it easier to carry than the sheath knives that were typical then. Now in it's 4th generation, the Delica has been tweaked and improved so now there are variations to meet nearly any users needs. The Endura 4 lightweight is distinguished by its skeletonized steel liners and fiberglass reinforced nylon (FRN) handle. This variant features a full flat ground plain edge blade of  black titanium carbonitride (TiCN)  S335VN stainless steel.   Obverse of blade marked with serial number, TNP (for "The Nutnfancy Project) and date of 12/2021.  The blade locks via a sturdy back lock that provides a secure lock up and allows for easy lock release with either hand. The FRN handles on the Endura 4 Lightweight feature Bi-Directional Texturing for a secure grip, and a hourglass pocket clip that can be mounted on the left or right side in the tip up or tip down position. Specs: Weight: 3.4 ounces Overall Length: 8.75 inches Blade Length: 3.75 inches Blade Steel:  S35VN Blade Thickness: .125 inches Blade Shape: Modified Drop Point Blade Grind: Full Flat Blade Finish: Black TiCN coated.  Handle Material: Bright Blue FRN 

Hardware:  All Black Lock Type: Back Lock Opening Mechanism: Round Hole Pocket Clip: Reversible, Tip Up/Down Country of Origin: Japan