KNIVES

Smith & Wesson 1122570 Freelancer Button Lock folding knife.

  This button lock clip point pocket knife is built for a smooth open. Break away from finger flippers and thumb studs for a smooth snap-open pocket knife that fits your everyday carry needs.

Features:

--Blade Length: 3.5"

--Overall Length: 7.87"

--Weight: 3.2 oz

--Blade Material: 8Cr13MoV Stainless Steel

--Button lock/unlock

--Tip-up pocket clip

PRC

The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II.  This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.

SPECIFICATIONS:

--Overall Length: 12"

--Blade Length: 7"

--Blade Thickness: 3/16"

--Blade Steel: SK5

--Blade Hardness: 58-60 HRC

--Blade Style: Fixed double edge dagger symmetrical blade

--Coating: Black Powder Coat

--Sheath: Black Plastic injection molded Sheath with nylon hanger

--Weight: 0.444 LBS (Knife)

Taiwan --Be advised, some jurisdictions have restrictions on double edge blades.  Be sure of your laws as they apply.

Ontario Mark 3 Model O Navy Dive Knife This knife is used exclusively by U.S. Naval Forces. Ontario Knife Company has produced the this knife for many decades and it has seen combat with U.S. armed forces. Needless to say, these veteran blades are not in the business of giving quarter.FEATURES AND SPECIFICATIONS:--BLADE COLOR: Black--BLADE FINISH: Black Oxide--BLADE GRIND: Flat Bevel w/ Secondary Flat Bevel--BLADE LENGTH: 6.0 in (15.2 cm)--BLADE MATERIAL: Stainless Steel--BLADE THICKNESS: 0.165 in (0.419 cm)--EDGE TYPE: Plain--HANDLE COLOR: Black--BLADE HARDNESS: 49-54 HRC--NATIONAL STOCK NUMBER: 1095-00-391-1056--OVERALL LENGTH: 11.1 in (28.2 cm)s--SHEATH: Black Molded Plastic--SHEATH TYPE: Belt Clip--Weight: 1.2 (Lbs)--UPC: 071721-0-6141-0 Made in the USA

Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.

  The most famous fixed blade knife in the World.  The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC.  Hard plastic MOLLE compatible sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  USMC--NSN:  1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches--KNIFE:  USA --SHEATH:  Taiwan

Simply put, the Cold Steel SRK (Survival Rescue Knife) was designed specifically with this in mind. A popular knife with Military and Tactical Law Enforcement Personnel, the SRK is the standard issue knife of the Navy SEALS for their BUDS - or Basic Underwater Demolition training - the SRK has proved its worth time and time again in the most demanding environments. Whatever the mission, we're confident that the SRK is the knife for you!

SPECIFICATIONS:

--Weight: 8.2oz 

--Blade Thickness: 5mm 

--Blade Length: 6" 

--Blade Steel: SK-5 High Carbon w/ Black Tuff-Ex™ Finish 

--Handle Length: 4-3/4" 

--Handle Material:  Desert Tan Kray-Ex™ --Overall Length: 10-3/4" 

--Includes Secure-Ex® Sheath

Taiwan

Special run Spyderco C229MPM4BK Shaman with Green Canvas Micarta handle scales over nested skeletonized steel liners.   The blade is full flat ground plain edge made of Black DLC coated M4 Steel. Drilled and tapped on all four corners for right of left side tip-up or tip-down carry.  Compression lock.

Blade Length:  3 1/2"

Closed Length:  4 3/4"

This knife bears a collector club number

USA

The Spyderco C148PBK Ambitious is a great budget friendly every day carry option.  The Ambitious features a 2 1/4" flat ground plain edge blade of 8Cr13MoV stainless steel.  Black Fiberglass Reinforced Nylon (FRN} handles over dual skeletonized stainless steel liners.  Handles are drilled and tapped for left or right side tip-up or tip-down carry.  Linerlock.   3 1/2" closed.

PRC

LT Wright Small Northern Hunter fixed blade field knife.   Features a 3 1/2" High Saber Ground blade of AEB-L Steel.  Sharpened blade spine for use with ferro-rods (not included).  Full tang construction for strength and balance.  Matte Green 

The Buck 150BLS Hookset 6" Saltwater Cleaver features a sturdy 6" gray Titanium coated 5Cr15MoV Stainless blade. Blue and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC

The Buck 145BLS Hookset 6" Saltwater Filet Knife features a flexable 6" flat ground gray Titanium coated 5Cr15MoV Stainless blade. Blue and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC

The Buck 144ORS Hookset 6" Freshwater Filet Knife features a flexable 6" flat ground 5Cr15MoV Stainless blade. Orange and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC

The Buck 146ORS Hookset 9" Freshwater Filet Knife features a flexable 9" flat ground 5Cr15MoV Stainless blade. Orange and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC