KNIVES

Spyderco C262PBK Leaf Jumper.  Features a 3 1/8" full flat ground satin finished plain edge blade of VG-10 Stain.ess  Black FRN Handles.  Black Pocket clip.  Drilled and tapped on all four corners for right or left side tip-up of tip-down carry.  Mid-Lockback design.  4 3/8" closed.

Seki City

The Becker/Reinhardt Kukri is a labor of love designed and perfected with Ethan Becker and the Reinhardt Estate. Made from 0.188" thick 1095 Cro-Van steel, the kukri's 13.25" epoxy powder coated blade is proudly embellished with Hank Reinhardt's signature and coupled with Becker's distinct handle shape and a practical polyester sheath. Becker Knives "Work for a living".

SPECIFICATIONS:--WEIGHT:  1.4 lb--BLADE LENGTH:  13.25 inches--OVERALL LENGTH:  18.75 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Kukri--TANG STAMP:  KA-BAR/BK&T--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Ultramid®--ROCKWELL HARDNESS:  56-58--BLADE THICKNESS:  0.188 inches--BLADE WIDTH:  2.375 inches--KNIFE:  USA --SHEATH:  PRC

The Silent Hero will definitely hold up to hard use..There is a lanyard hole in the handle along with another in the finger guard. This is meant to allow the user to add a safety cord in order to improve the grip on the handle, which already allows for a solid grip. The finger-guard hole can also be used to assist in lashing to a spear when the situation warrants it.There is a finger choil up into the blade to give you the ability to choke up and execute precise, fine cuts. The drop point design makes this knife great for slicing and gives the tip extra strength. This knife will be a great knife for bushcraft, survival, and tactical purposes.The black leather sheath is durable and looks great paired with this knife. The Silent Hero is held in place with a single snap loop that curls around the finger guard. It is large enough that it can be used to chop but is also still small enough to complete most of the tasks you can do or want to do with a smaller knife.

SPECIFICATIONS:--Overall Length:  11.25"--Blade Length:  6.38"--Cutting Edge:  5.75"--Blade Thickness:  0.190"--Blade Shape:  Hunters Point--Blade Steel:  1095 --Hardness:  RC 56-58--Blade Finish:  Sniper Gray--Handle Material:  Black Canvas Micarta--Handle Style:  Rocky Mountain Tread--Knife Weight:  12oz--Weight w/ Sheath:  17oz--Sheath Included:  Yes--Sheath Material:  Black Leather--Sheath Clip: Belt Loop  USA

WE Knife 715D Ignition Flipper Framelock. Features a 3.5" two tone VG-10 stainless steel blade. Blue G-10 front scale. Stonewashed titanium back handle. Framelock with steel insert. Pocket clip. FEATURES AND SPECIFICATIONS: --Blade Steel: VG-10 Stainless --Blade Style: Spear Point --Blade Grind: Hollow Grind --Blade Finiish: Two-tone Stonewashed with Satin Flats --Edge Type: Plain Edge --Handle Material: Lightly Textured Blue G-10 with 6AL4V Titanium backside and Framelock --Lanyard Hole: Yes --Pocket Clip: Yes - Titanium - Reversable Tip up carry --Frame/Liner: 6AL4V Titanium --Action: Manual --Opener: Flipper and/or Thumbhole --Lock: Titanium Framelock with Steel Insert --Brand: WE Knife --Model Name: Ignition --Model Number: 715D --Use: everyday Carry (EDC) --Blade Thickness: 0.133" --Cutting Edge: 3 3/8" --Blade Length: 3 1/2" --Handle Length: 4 1/2" --Overall Length: 8" --Handle Thickness: 0.470" --Weight: 3.2 oz Country of Origin: PRC OTHER FEATURES: --6AL4V Titanium Screws and Pivot Cap --Ceramic Ball Bearing Washers --Includes hardware adjustment tool, cleaning cloth and zippered pouch.

From a collection: Original c1992 Al Mar Special Warfare 1 (3101) fixed blade knife. Features a 6 1/8" satin finished plain edge stainless blade (probably VG-10 - but I'm not sure I remember that). Titanwood laminate palm-swell handles. Brass guard. 11 1/8" overall. Knife has never been carried, used or sharpened. Handle has the smallest of a chip that was lost during the drilling for lanyard tube. Not uncommon on laminate handles. Not very noticable, but just letting you know it's there. Original leather sheath that has never been out of it's factory plastic bag. (So this knife has never even been sheathed before) Numbered pre-production piece. Knife, cardboard blade sleave and box all bear original number. Original box is solid - but, here is the bad news - It shows storage wear, some staining and some scrapes....still solid, still original, but like me, just not pretty. Priced accordingly. Pristine knife as it came from Seki City - including the chip in handle - character some might say. Sheath brand new. Box, rather ratty looking. Side note - we sold this knife new c.1992. NOTE: While in excellent condition except as noted, be advised this knife is from a collection, so please consider it used.

Buck 0120GRS1 General Pro Fixed Blade (13104) This famous classic Buck design is upgraded into the 21st century with Canvas Micarta Handles and premium BOS treated S35VN Stainless blades. SPECIFICATIONS: --Blade Steel: BOS Treated S35VN Stainless --Blade Shape: Clip Point --Blade Length: 7 3/8" --Handle: Green Canvas Micarta with aluminum guard and pommel. --Overall Length: 12" --Weight: 8.3 oz --Genuine Leather Sheath included Gift boxed USA

Al Mar Ultra Chef Stainless Steel 4" Kitchen Utility Knife. The AL MAR all Stainless Steel Ultra-Chef Knives are contemporary in design and state-of-the-art in performance. The one-piece ergonomic, hollow, all stainless steel handles are not only visually stunning and perfectly balanced, they are also impervious to just about everything found in todays kitchen environments. Each blade is 33 layers of stainless steel with the center cutting layer made of VG-10 Cobalt stainless steel which is heat treated to a Rockwell c-scale hardness of 60-62. Strong and light in weight, the All Stainless Steel Ultra-Chef Knives are hand sharpened to an incredible edge and each knife is individually gift-boxed. SELECT SPECS: --Blade: Damascus - 33 layers stainless over core of VG-10 Cobalt steel --Hardness: 60-62 --Handle: Stainless Steel --One piece design. --Blade length: 4" --Overall length: 9 1/2" Country of Origin: Japan (Seki City)

Ka-Bar 1219 U.S. Army marked partially serrated fighting knife.

  The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials. Tang stamped U.S. ARMY. U.S. Army stamped leather sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  U.S. ARMY--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--KNIFE MANUFACTURED IN:  United States--SHEATH MANUFACTURED IN:  Mexico--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches

Right from the beginning, Brad Zinker aimed the Boker Plus FR at the range of sturdier gentleman's folders. However, the FR Mini takes the sturdy appeal into a much more compact format without dimming the charm of the rugged utility knife. A successful synthesis of elegance, comfort and function. Titanium framelock and VG/10 blade with ball bearings and flipper. With a clip (tip-up).

SPECIFICATIONS:--Overall Length:  6.46 in--Blade Length:  2.91 in--Blade Thickness:  0.10 in--Weight:  1.41 oz--Designer:  Brad Zinker--Blade Material:  VG-10--Handle Material:  Titanium--Opener:  Flipper--Lock Type:  Framelock  PRC

Brad Zinker always manages to uncover new facets of the popular Boker Plus Urban Trapper. As a master of his craft, the US knife designer knows better than anyone else how to reinvent the existing designs of the gentleman's knife with clever combinations of materials. The Boker Plus Urban Trapper Jigged Titanium comes with a surface-ground and ball-bearing VG-10 blade with a hairline finish, which opens with a flipper and is secured by a robust linerlock. A modern accent is set by the titanium handle, which pays homage to the countless classics with jigged-bone handle scales. This not only places the knife right up front visually, but also significantly enhances the feel of the pocket-knife. The stainless steel deep-carry clip allows for tip-up (r) carry and is finished with a stonewash finish.

SPECIFICATIONS:--Overall Length:  7.68 in--Blade Length:  3.50 in--Blade Thickness:  0.10 in--Weight:  2.61 oz--Designer:  Brad Zinker--Blade Material:  VG-10--Handle Material:  Titanium--Opener:  Flipper--Lock Type:  Linerlock  PRC

The Boker Plus Mini Tracker, designed by Dave Wenger, quickly became a favourite in the camping and bushcraft scene, as the sturdy outdoor knife with its massive blade made of 1095 carbon steel and corrosion-resistant powder coating is still convincing all along the line. The fully-grown Boker Plus Tracker is now pulling out of its slipstream. The same materials, the same features, but an incomparable performance! The top-heavy blade of the solid survival knife is equipped with two different grinding surfaces and is ideal for chopping, cutting, scraping, digging and levering. The optimal balance of blade thickness and length as well as the ergonomic shape of the finely textured Micarta handle scales allow for fatigue-free work. The handle has three decorative hollow brass rivets, the rear of which can be used as a lanyard hole. Supplied with a belt adapter and a custom-fit Kydex sheath.

SPECIFICATIONS:--Overall Length:  12.28 in--Blade Length:  7.20 in--Blade Thickness:  0.24 in--Weight:  16.72 oz--Designer:  Dave Wenger--Blade Material:  1095--Handle Material:  Micarta--Handle Color:  Brown--Blade Color:  Black--Item Number:  02BO073   PRC