Menu
KNIVES
Shop knives from brands like Spyderco, Chris Reeve Knives, ESEE, Zero Tolerance, Case, Benchmade and many, many more! We offer knives to cover anything and everything imaginable from big choppers to hack your way through a rainforest, to tiny slipjoints that disappear in a pocket for a day at the office. Shop our wide selection today and if you don't find what you are looking for or have a few questions, please contact us and we'll do whatever we can to help!
Active filters
-
![Polestar CTS-BD1 PE]()
![]()
Polestar CTS-BD1 PE
$90.75The Spyderco Polestar is a new addition to the Value Folder Family which brings high quality and performance to the table at a most reasonable price. The Spyderco Polestar features a 3 1/4" full flat ground plain edge blade of American-made CTS BD1 Stainless Steel. Gray checkered G-10 handle scales with an open back for lightweight and ergonomic handling. Four-position hourglass pocket clip. Sturdy LinerLock mechanism. The Polestar is a lot of knife for a fair and affordable price. PRC
-
![Endura Flat Grind Wharny PE...]()
Endura Flat Grind Wharny PE...
$142.80Spyderco C10FPWK390 Endura featuring a 3 3/4" full flat ground plain edge Wharncliffe blade of K390 steel Blue FRN Handles. Pocket Clip drilled and tapped on all four corners for left or right tip-up or tip-down carry. Mid-Lockback with Boye Dent.
5" closed. Seki City
-
![Endura Blue FRN Flat Ground...]()
Endura Blue FRN Flat Ground...
$142.80Spyderco C10FSK390 Endura with Blue FRN handles and a flat ground satin finished serrated edge blade of K390 steel.
Handles drilled and tapped on all four corners for left or right side tip-up or tip-down carry. Mid-Lockback design with Boye dent.
Blade Length: 3 3/4"
Closed Length: 4 15/16"
Seki City Japan
-
![Spyderco Waterway]()
![]()
Spyderco Waterway
$175.00The Spyderco Waterway was designed by knife enthusiast and professional kayak fisherman Lance Clinton. The Waterway is the result of Clinton's vision for an ultra corrosion resistant knife for fishing tasks, that would still remain well suited to general outdoor and utility use. To achieve that vision, the Waterway is contructed from LC200N steel, a state of the art high nitrogen alloyed tool steel that offers extreme corrosion resistance and toughness even at high hardness. To maximize it's strength and balance, the Waterway features full tang construction. The G10 handle scales have been 3D machined with a raised diamond pattern to provide a non-slip grip in any environment. These scales are attached via a specialized process which uses blind pins and a high strength industrial adhesive to ensure a permanent, water tight bond. The Waterway ships with a custom molded Boltaron sheath with a versatile G-Clip attachment. The snap-fit sheath retains the knife securely, while still allowing a smoth draw and easy access to the knife. The G-Clip can be configured to provide a full range of carry options. Specs: Weight: 4.3 ounces Overall Length: 9.5" Blade Length: 4.44" Blade Steel: LC200N Blade Thickness: 0.120" Blade Shape: Drop Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: 3D Machined G10 Country of Origin: USA -
![Pacific 2 Salt PE Black]()
![]()
Pacific 2 Salt PE Black
$135.00Spyderco C91PBBK2 Pacific 2 Salt. Black Firberglass Reinforced Nylon (FRN) handles and Black finished H1 Stainless Steel plain edge blade. A dynamic combination of the third-generation Endura one-piece handle design and the ultra-corrosion-resistant properties of H-1 steel, the original Pacific Salt was an incredibly capable full-service folding knife. What it lacked, however, were the improvements that made the current Endura 4 even better than its predecessor. The Pacific Salt 2 includes a high-traction Bi-Directional Texture pattern, enhanced handle ergonomics, and a versatile four-position pocket clip. In addition to these features, this knife integrates a Black H-1 blade with a linerless handle in a shining example of Spyderco's passion for Constant Quality Improvement (C.Q.I.). This knife was born to perform in and around the water. SPECIFICATIONS: --Overall Length: 8.72" (221mm) --Closed Length: 4.98" (126mm) --Blade Length: 3.78" (96mm) --Blade Thickness: 0.114" (3mm) --Blade Steel: H1 Stainless --Blade Finish: Black --Handle Material: Black Fiberglass Reinforced Nylon (FRN) --Pocket Clip: Yes, right or left hand, tip up/tip down --Opening: Spyderhole --Lock Type: Lockback Weight: 2.9oz --Brand: Spyderco --Model Name: Pacific 2 --Model Number: C91PBBK2 --Item Number: SC91PBBK2 Country of Origin: Japan -
![Spyderco Dragonfly II SS, PE]()
Spyderco Dragonfly II SS, PE
$92.25Blade Steel: VG-10 Blade Thickness: 3/32" 2.5mm Clip: Stainless Steel Diam. Blade Hole: 7/16" 11mm Edge Type: Plain Edge Handle Material: Stainless Steel Hardness: 59-60 Length Blade: 2 5/16" 58mm Length Cutting Edge: 1 7/8" 48mm Length Overall: 5 7/16" 138mm Weight: 2.6oz 73g -
![Spydie Chef Titanium PE]()
![]()
Spydie Chef Titanium PE
$303.00The Spydiechef was designed by Polish custom knifemaker Marcin Slysz. The Spydiechef is a highly evolved folding knife design that takes the user-friendly and deft balance of a world-class chef's knife and translates them into an all-purpose everyday carry cutting tool. The defining feature of the Spydiechef is its gracefully curved, full flat ground ultra-corrosion-resistang blade which is machined from LC200N steel. This blade provides an exceptional blend of toughness, edge holding and corrosion resistance. The open backed handle is built with two precision-machined solid titanium scales. The knife incorporates the Reeve Integral Lock framelock. Reversable deep pocket wire clip provides convenient ambidextrous, tip-up carry. Like the blade and titanium handles, the pocket clip, screws and all other component parts are machined from highly corrosion-resistant alloys. SPECS: -Blade length: 3.32" -Handle length: 4.46" -Weight: 3.8 ounces Tiachung -
![Pry-Mate]()
![]()
Pry-Mate
$199.97German Boker Tree Brand Pry-Mate. This is an unbelievably stout little fixed blade knife that is sure to impress. Features an almost 7mm super thick polished plain edge blade of Bohler N690 steel. Milled black micarta handle scales over red liners and full tang construction. Hand fitted black Kydex sheath and Tek-Lok allows for multiple carry positions.
Blade length: 3 1/4". Overall length: 6 1/2".
This discontinued knife is old new inventory found in the back room being held for a customer that never picked it up.
Likely the last chance to get this classic new-in-box from an authorized dealer.
Germany
-
![Ayoob Gray G-10 Handle CPM...]()
![]()
- Out of Stock
Ayoob Gray G-10 Handle CPM...
$210.00Spyderco C60GPGY Sprint Run Massad Ayoob Lockback. Features a 3 3/4" satin finished plain edge blade of CPM CRUWEAR. Gray peel-ply textured G-10 Handle scales over skeletonized steel liners. Mid-Lockback design with Boye Dent. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry.
5" closed.
Seki City Japan
-
![Boker Plus Butterfly - D2...]()
- Out of Stock
Boker Plus Butterfly - D2...
$69.97CALL TO ORDER. DUE TO PAYPAL RESTRICTIONS PAYPAL NOT ACCEPTED FOR THIS ITEM
Boker Plus 06EX226 Butterfly Knife.
Features a 3 1/4" live blade of D2 tool steel. Skeletonized steel liners with Black G-10 Scales. Stainless pocket clip. Manual latch. 4 1/4" closed. USA
-
![Spyderco Watu]()
- Out of Stock
Spyderco Watu
$222.60The Spyderco Watu is another exciting entry into the Spyderco Ethnic Series which highlights knife designs from around the world. The Watu draws inspiration from the knives of the Chokwe people of central and southern Africa. The original Spyderco Chokwe has become a revered member of the Ethnic Series, and the Watu is a smilar design in a smaller form. Featuring a flat ground CPM 20CV blade, carbon fiber/G10 laminate scales, and a compression lock, the Watu is an excellent choice for everyday carry. Specs: Overall Length: 7.35" Blade Length: 3.26" Blade Steel: CPM 20CV Blade Grind: Full Flat Weight: 3.0 ounces Handle Material: Carbon Fiber/G10 Laminate Lock Type: Compression Pocket clip: Wire Clip, Tip up ambi Country of Origin: Taiwan -
![Spyderco Paysan]()
![]()
- Out of Stock
Spyderco Paysan
$644.00The Spyderco Paysan is a collaboration between and Spyderco and knifemaker Peter Rassenti to offer a production version of the custom Paysan. The Paysan's unique saber ground sheepsfoot blade is constructed from CPM S90V steel, and features the Spyderco trademark round hole. The Paysan's handle has been machined from one single piece of titanium and features a Reeve Integral Lock (framelock) with a steel lock face insert that also serves as an over travel stop. The handle has been shaped to provide a comfortable grip on the knife while remaining thin and easy to carry. The pocketclip is the hourglass shape that is often used by Spyderco and is configured for tip-up, right hand carry only. Specs: Weight: 4.4 ounces Overall Length: 8.74" Blade Length: 3.88" Blade Steel: CPM S90V Blade Thickness: 0.157" Blade Shape: Sheepsfoot Blade Grind: Saber Blade Finish: Polished Stonewash Handle Material: Titanium Lock Type: Framelock Opening Mechanism: Round Hole Pocket Clip: Tip-up Right Hand Only Country of Origin: Taiwan -
![ClipiTool Plain and Serrated]()
- Out of Stock
ClipiTool Plain and Serrated
$45.75Spyderco ClipiTool with Plain and Serrated blade. SPECS: Blade Length: 2" (51 mm) Cutting Edge: 1.75" (44 mm) Overall Length: 4.57" (116 mm) Closed Length: 2.57" (65 mm) Blade Thickness: 0.079" (2 mm) Hole Diameter: 0.035" (8.9 mm) Blade Material: 8Cr13MoV Handle Material: Stainless Steel Locking Mechanism: Slipjoint Weight: 1.8 oz. (51 g) PRC -
![ClipiTool Scissors]()
![]()
- Out of Stock
ClipiTool Scissors
$45.75Spyderco C169P Clipitool w/scissors Spyderco ClipiTool with Scissors. Stainless steel body with plain edge non-locking blade and Scissors. SPECS: Blade Length: 2" (51 mm) Cutting Edge: 1.75" (44 mm) Overall Length: 4.57" (116 mm) Closed Length: 2.57" (65 mm) Blade Thickness: 0.079" (2 mm) Hole Diameter: 0.035" (8.9 mm) Blade Material: 8Cr13MoV Handle Material: Stainless Steel Locking Mechanism: Slipjoint Weight: 1.9 oz. (54 g) PRC -
![Endura 4 GITD Black Blade]()
- Out of Stock
Endura 4 GITD Black Blade
$114.80This version of the Spyderco Endura 4 features Glow in the Dark Zome handle scales and a black DLC coated blade. Specs: Overall Length: 8.78" (223mm) Closed Length: 4.98" (126mm) Blade Length: 3.8" (97mm) Blade Thickness: .118" (3mm) Blade Steel: VG-10 Blade Finish: Black DLC Handle Material: FRN Pocket Clip: Yes, right or left hand, tip up/tip down Lock Type: Lockback Weight: 3.3oz Country of Origin: Japan -
![Backdrop]()
- Out of Stock
Backdrop
$59.96Boker 02BO028 Backdrop Fixed Blade Knife. Known for his unusual and innovative designs, custom knifemaker Mickey Yurco has an incomparable sense of ergonomics and exceptional solutions. The Boker Plus Backdrop is no exception and convinces with a concept designed for speed and flexibility. The perfectly fitting Kydex sheath can be carried with the double-sided hook in the front trouser pocket, with the leather plate in the back pocket or with the ball chain as neck knife around the neck. The hook and plate also prevent the sheath from slipping out of the pocket when the knife is pulled, thus ensuring that the knife is always ready for use. In addition, the freely transportable backdrop can thus be carried just as comfortably and discreetly as a folding knife. The handy backup knife is equipped with a satin-finished D2 blade and black G10 handle scales with decorative rivets. The ergonomic finger recess and jimpings in the thumb rest area increase work safety. With reinforced lanyard hole. SPECIFICATIONS: --Overall Length: 7.20 in --Blade Length: 3.62 in --Blade Thickness: 0.17 in --Weight: 3.84 oz --Blade Material: D2 Tool Steel --Blade Edge: Plain Edge --Blade Finish: Satin --Handle Material: Smooth Black G-10 --Sheath Material: Black Kydex --Brand: Boker Plus --Model Name: Backdrop --Model Number: 02BO028 --Item Number: BOK02BO028 Country of Origin: PRC
