KNIVES

Purist design and surgical precision as an expression of "haute coutellerie". The French knifemaker Charles de Buyer is known for his designs that are reduced to the essentials and at the same time promise a high utility value. The fixed knife is designed as an all-steel construction and features exciting details. Jimpings on the back of the edge-retaining D2 blade improve handling, while the nail nick and the pronounced ricasso add decorative accents. The flat handle of the Gekai gives a comfortable feel in the hand and has two large recesses at the end of the handle that save weight and can be used as a lanyard hole. Supplied with a custom-fit Kydex sheath and a belt adapter.

SPECIFICATIONS:--Overall Length:  7.48 in--Blade Length:  3.23 in--Blade Thickness:  0.19 in--Weight:  3.00 oz--Designer:  Charles de Buyer--Blade and Handle Material:  D2   PRC

The impressive Pilot Knife from US knifemaker Dave Wenger is a fully-grown outdoor and survival knife with a tactical orientation. The massive D2 blade is extremely edge-resistant, robust and also has an abrasion-resistant powder coating. The military character of this fixed blade is underlined by the groove on both sides and the distinctive sawback. The ergonomic G10 handle scales promise a comfortable grip and a secure hold in any situation. Decorative hollow brass studs help to save weight and can also be used as a lanyard hole. Supplied with a custom-fit Kydex sheath and a belt clip.

SPECIFICATIONS:--Blade Length: 5.51"--Overall Length: 10.24"--Blade Material: D2 Tool Steel--Blade Thickness: 0.20"--Blade Style: Sawback Clip Point--Blade Finish: Black Powder Coating--Handle Material: Black G10 with Hollow Brass Studs--Handle Thickness: 0.79--Sheath Material: Black Kydex--Designer: Dave Wenger--Weight: 9.3 oz.  PRC

Designed for those who don’t see Mountains, but Opportunities! When climbing any outdoor challenge, an Explorer and the Mountain forge a PASS together using skill, determination, nature’s openings, and the right tools. Just as the name implies, the new Mountain PASS Series by Condor is designed to help you through the toughest challenges. These designs by Jason Breeden, a West Virginia native who has spent his life in the hills and hollows, are mapped out by following the fundamental principles used by traditional woodsmen. As rugged and venerable as the Appalachians that inspired them, the Mountain PASS Series combines Condor’s craftsmanship with modern materials to prevail through Plain And Simple Survival.

SPECIFICATIONS:

--BLADE:  6.26 in (158.9 mm)

--OAL:  10.57 in (268.3 mm)

--THICKNESS:  0.14 in (3.5 mm)

--WEIGHT:  10.94 oz (310.0 g)

--MATERIAL:  440C Stainless Steel

--FINISH:  Condor Classic

--GRIND:  Flat Grind w/ Second Belvel

--HANDLE:  Micarta®

--SHEATH:  Hand Crafted Welted Leather

El Salvador

Ka-Bar 02-1248 Cutlass Machete with Sheath. 

  Perfect for chopping down weeds, clearing a camp site or cutting small limbs and tree branches.  Sold with a Black Hard Plastic/Cordura® sheath.

SPECIFICATIONS:--WEIGHT:  1.1 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  11 inches--OVERALL LENGTH:  16.5 inches--SHAPE:  Cutlass/Khukri--TANG STAMP:  KA-BAR--KNIFE MATERIAL:  Black SK5--GRIND:  Hollow--HANDLE MATERIAL:  Black TPR--ROCKWELL HARDNESS:  52-54--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  2.375 inches  --Taiwan

Jason Breeden designed Condor 1827-10.5-4C Chute Knife. 

Holding to classic tactical edged tools that can function in the many fields of operation, Jason Breeden designed his twist on the Tactical P.A.S.S. Chute Knife. Keeping close to the P.A.S.S. roots of function in the outdoors, the Chute Knife has an edge that comes right to the guard, with a customary false edge that flows right into the fuller.

SPECIFICATIONS:

--BLADE:  5.45 in (138.3 mm)

---OAL:  10.54 in (267.6 mm)

--BLADE THICKNESS:  0.14 in (3.5 mm)

--WEIGHT:  14.46 oz (410.0 g)

--BLADE MATERIAL:  440C Stainless Steel

--BLADE FINISH:  Condor Classic

--BLADE GRIND: Flat Grind w/ Secondary Bevel

--HANDLE:  Micarta®

--SHEATH:  Hand Crafted Welted Leather

El Salvador

--Notice - this is an unsharpened Trainer blade.
The red trainer variant of the SOCP dagger or knife, this training tool integrates into the same sheath that accepts both the 176 and 178 models so the kit placement and training integrate seamlessly with real world application. MOLLE® compatible.
SPECIFICATIONS:
Specifications
--Designer: Greg Thompson
--Blade Steel: 440C
--Blade Finish: Red
--Blade Length: 2.78" | 7.06cm
--Blade Thickness: 0.175" | 4.45mm
--Overall Length: 6.81" | 17.30cm
--Handle Length: 4.03" | 10.24cm
--Handle Thickness: 0.175" | 4.45mm
--Weight: 2.31oz. | 65.49g
--Sheath: Tan Injection Molded Plastic with Clip and Cord
--Sheath Weight: 1.00oz. | 28.35g
TRAINER
USA

The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II.  This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.

SPECIFICATIONS:

--Overall Length: 12"

--Blade Length: 7"

--Blade Thickness: 3/16"

--Blade Steel: SK5

--Blade Hardness: 58-60 HRC

--Blade Style: Fixed double edge dagger symmetrical blade

--Coating: Black Powder Coat

--Sheath: Black Plastic injection molded Sheath with nylon hanger

--Weight: 0.444 LBS (Knife)

Taiwan --Be advised, some jurisdictions have restrictions on double edge blades.  Be sure of your laws as they apply.

The up-and-coming German knife designer Simon Frömel is no stranger to Boker. He has already caused a sensation in the past with the Boker Plus Rescue Kiridashi. His next coup is certain: the Boker Plus Bad Moon is a fixed Karambit knife with a minimalist look and maximum functionality. The all-steel construction is equipped with a Hawkbill blade made of extreme edge retention D2, the lines of which continue in the curved handle and thus guarantee very efficient use. The entire knife is enhanced with a dark stonewash finish. Typical for this type of knife is the large ring at the end of the handle, which guarantees a secure hand position and can also be used as a lanyard hole. Supplied with a custom-made Kydex sheath and a ball chain for use as a neck knife.

SPECIFICATIONS:--Overall Length:  4.92 in--Blade Length:  2.56 in--Blade Thickness:  0.16 in--Weight:  2.54 oz--Designer:  Simon Frömel--Blade Material:  D2--Sheath Material:  Kydex   PRC

Simply put, the Cold Steel SRK (Survival Rescue Knife) was designed specifically with this in mind. A popular knife with Military and Tactical Law Enforcement Personnel, the SRK is the standard issue knife of the Navy SEALS for their BUDS - or Basic Underwater Demolition training - the SRK has proved its worth time and time again in the most demanding environments. Whatever the mission, we're confident that the SRK is the knife for you!

SPECIFICATIONS:

--Weight: 8.2oz 

--Blade Thickness: 5mm 

--Blade Length: 6" 

--Blade Steel: SK-5 High Carbon w/ Black Tuff-Ex™ Finish 

--Handle Length: 4-3/4" 

--Handle Material:  Desert Tan Kray-Ex™ --Overall Length: 10-3/4" 

--Includes Secure-Ex® Sheath

Taiwan

Now you can get almost all the performance of the SRK in a substantially shorter, lighter and thinner package. Designed expressly for those who want or need a low-profile fixed blade. The SRK compact is almost a mirror image of its big brother with all the features you have to come to expect. Supplied with a super sturdy Secure-Ex sheath it's a light weight wonder you will treasure for years to come.

SPECIFICATIONS:

--Weight: 5.1oz 

--Blade Thickness: 4mm 

--Blade Length: 5" 

--Blade Steel: SK-5 Carbon Steel w/ Black Tuff-Ex™ Finish 

--Handle Length: 4-1/2" 

--Handle Material:  Olive Drab Green Kray-Ex™ --Overall Length: 9-1/2" 

--Additional Features: Secure-Ex® Sheath --Blade Shape: Clip Point

Taiwan