KNIVES
-
Ka Bar TDI Serrated
$43.97TDI LAW ENFORCEMENT KNIFE KB02-1481 Designed by a Officer for Officers, by John Brenner, Founder of Tactical Defense Institute. Designed to be worn with a duty belt, concealed behind it, A last ditch weapon for Police Officers. -
TDI Investigator
$39.97The Ka-Bar 1493 Investigator is the pefect low profile EDC (Everyday Carry) fixed blade. Lightweight and compact, the Investigator is perfect on a belt, in a bag, or stashed in a glovebox. Please note a black hard plastic sheath and clip is included. The sheath is ambidextrous and also fits the KA-BAR TDI 1477CB, 1480, and 1481. --Blade Steel: AUS 8A Stainless --Blade Edge: Plain --Blade Finish: Black --Blade Length: 2.71" --Blade Thickness: 0.12" --Overall Length: 5" --Weight: 0.4 lbs --Taiwan -
KaBar Large TDI Tanto PS
$63.97KaBar Large TDI Tanto partially serrated black blade. Zytel handles. Plastic sheath. -
-
Ka Bar TDI Plain Edge
$43.97TDI LAW ENFORCEMENT KNIFE KB02-1480 Designed by a Officer for Officers, by John Brenner, Founder of Tactical Defense Institute. Designed to be worn with a duty belt, concealed behind it, A last ditch weapon for Police Officers. -
TDI LDK Neck Knife
$16.99KaBar TDI LDK Ankle/Neck Knife. Black powder coated stainless steel. Lace in boots, pin inside a belt or lapel, or hang around neck. Hard plastic friction sheath. Black 550 cord included. No bigger than a credit card. -
Combat Kukri
$79.97This heavy-duty chopper gets it's shape from it's older sibling, the Kukri Machete. At about 80% the size of the larger version, the Combat Kukri performs just as well at clearing brush and small tree limbs. It's smaller profile makes it a little easier for toting around - at just shy of a pound, it's a more appropriately sized tool for combat carry as well. SPECS: Weight: 0.80 lb. Steel: 1095 Cro-Van Measurements: Blade length 8-1/2"; Overall length: 13-3/8" Grind: Flat Edge Angles: 20 Degrees Handle Material: Kraton G® HRC: 56-58 Stamp: USA Butt Cap/Guard: Powdered Metal Blade Thickness: 0.165 Knife made in USA Sheath made in PRC
-
Short Ka-Bar
$64.97Short Ka-Bar. 5 1/25" Blade of 1095 Steel. Black epoxy powder coat. Kraton G Thermoplastic elastomer handle. Molded Kydex sheath. Plain edge. -
Ka-Bar Fighter/Utility Black
$89.90Overall Length 11.75' Blade Length 7" High Carbon Black Plain Edge blade. Black Kraton handle. Ful length stick tang construction. Kydex Sheath USA -
EK Model 50 Commando Short...
$99.97Ka-Bar EK50 Commando Short Clip Point Blade.
The EK50 Short Clip Point has a 1095 Cro-Van clip point blade that measures 5.0625” in length. The EK50 is 9.25” overall and weighs 0.65 lb. A MOLLE compatible Celcon® sheath that is manufactured in the USA comes with the EK50. Knife manufactured in the USA with German steel.
SPECIFICATIONS:--WEIGHT: 0.65 lb--BLADE TYPE: Fixed Blade--BLADE LENGTH: 5.062 inches--OVERALL LENGTH: 9.25 inches--EDGE ANGLES: 20--SHAPE: Clip Point--TANG STAMP: KA-BAR/Ek Commando--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Ultramid--ROCKWELL HARDNESS: 56-58--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 1.312 inches USA
-
Becker/Reinhardt Kukri
$169.97The Becker/Reinhardt Kukri is a labor of love designed and perfected with Ethan Becker and the Reinhardt Estate. Made from 0.188" thick 1095 Cro-Van steel, the kukri's 13.25" epoxy powder coated blade is proudly embellished with Hank Reinhardt's signature and coupled with Becker's distinct handle shape and a practical polyester sheath. Becker Knives "Work for a living".
SPECIFICATIONS:--WEIGHT: 1.4 lb--BLADE LENGTH: 13.25 inches--OVERALL LENGTH: 18.75 inches--EDGE ANGLES: 20 Degrees--SHAPE: Kukri--TANG STAMP: KA-BAR/BK&T--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Ultramid®--ROCKWELL HARDNESS: 56-58--BLADE THICKNESS: 0.188 inches--BLADE WIDTH: 2.375 inches--KNIFE: USA --SHEATH: PRC
-
Ka-Bar U.S.M.C Fighting...
$89.50Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.
The most famous fixed blade knife in the World. The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC. Hard plastic MOLLE compatible sheath included.
SPECIFICATIONS:--WEIGHT: 0.7 lb--BLADE LENGTH: 7 inches--OVERALL LENGTH: 11.875 inches--EDGE ANGLES: 20 Degrees--SHAPE: Clip Point--TANG STAMP: USMC--NSN: 1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Stacked Leather--ROCKWELL HARDNESS: 56-58--BUTT CAP/GUARD: 12GA Commercial Grade Carbon Steel--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 1.188 inches--KNIFE: USA --SHEATH: Taiwan
-
Ka-Bar Machete Cutlass
$69.90Ka-Bar 02-1248 Cutlass Machete with Sheath.
Perfect for chopping down weeds, clearing a camp site or cutting small limbs and tree branches. Sold with a Black Hard Plastic/Cordura® sheath.
SPECIFICATIONS:--WEIGHT: 1.1 lb--BLADE TYPE: Fixed Blade--BLADE LENGTH: 11 inches--OVERALL LENGTH: 16.5 inches--SHAPE: Cutlass/Khukri--TANG STAMP: KA-BAR--KNIFE MATERIAL: Black SK5--GRIND: Hollow--HANDLE MATERIAL: Black TPR--ROCKWELL HARDNESS: 52-54--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 2.375 inches --Taiwan
-
Ka-Bar Marine Hunter
$79.97Ka-Bar 1235 Marine Hunter
Classically styled leather-handled hunting knives have been popular since the early 1900s. Dressy enough for gift giving and practical for field use. Features a brass guard and aluminum butt cap. Hard shell lined leather KA-BAR® sheath included.
SPECIFICATIONS:--WEIGHT: 0.45 lb--BLADE TYPE: Fixed Blade--BLADE LENGTH: 5.875 inches--OVERALL LENGTH: 10.75 inches--SHAPE: Clip Point--TANG STAMP: KA-BAR--KNIFE MATERIAL: High Polished 5Cr15 Stainless Steel--GRIND: Hollow--HANDLE MATERIAL: Stacked Leather--ROCKWELL HARDNESS: 55-57--BUTT CAP/GUARD: Aluminum/Brass--BLADE THICKNESS: 0.125 inches--BLADE WIDTH: 1.125 inches--Knife: PRC--Sheath: Mexico
-
Ka-Bar U.S. Army Fighting...
$96.90Ka-Bar 1219 U.S. Army marked partially serrated fighting knife.
The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials. Tang stamped U.S. ARMY. U.S. Army stamped leather sheath included.
SPECIFICATIONS:--WEIGHT: 0.7 lb--BLADE TYPE: Fixed Blade--BLADE LENGTH: 7 inches--OVERALL LENGTH: 11.875 inches--EDGE ANGLES: 20 Degrees--SHAPE: Clip Point--TANG STAMP: U.S. ARMY--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Stacked Leather--ROCKWELL HARDNESS: 56-58--BUTT CAP/GUARD: 12GA Commercial Grade Carbon Steel--KNIFE MANUFACTURED IN: United States--SHEATH MANUFACTURED IN: Mexico--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 1.188 inches
-
EK Model 5 Bowie
$89.97KA-BAR's third introduction into the John Ek Commando Knife Co. product line is the highly anticipated Model 5. This updated version of the occupational fighting knife with hilt is made from 1095 Cro-Van and features a parkerized bowie blade, textured glass-filled nylon handles and traditional X-head fasteners. A US-made Celcon® sheath with retaining strap, self-locking function and multiple tie-down points is also included. Made in the USA. SELECT SPECS: --Weight: 0.70 lb --Steel: 1095 Cro-Van --Measurements: -Blade length 6.875" -Overall length: 12.9375" --Grind: Flat --Edge Angles: 20 Degrees --Handle Material: Glass-Filled Nylon --Blade Shape: Bowie --HRC: 56-58 --Stamp: KA-BAR/Ek Commando Knife Co. --Butt Cap/Guard: 12ga Commercial Grade Steel USA