FIXED BLADE KNIVES

Ka-Bar NAVY Fighting Knife The most famous fixed blade knife in the World - "the KA-BAR" - was designed to serve our troops during World War II and is still doing its job, with honors, more than 50 years later. 1095 carbon steel blade, epoxy powder coated. U.S.N. tang stamp. Stacked leather handle. Blade length 7", overall length 11 7/8" 0.68 lbs (blade only) Brown leather U.S. NAVY embossed sheath included. Knife USA

Ka-Bar ARMY Fighting Knife The most famous fixed blade knife in the World - "the KA-BAR" - was designed to serve our troops during World War II and is still doing its job, with honors, more than 50 years later. 1095 carbon steel blade, epoxy powder coated. U.S. ARMY tang stamp. Stacked leather handle Blade length 7", overall length 11 7/8" 0.68 lbs (blade only) Brown leather ARMY embossed sheath included. Knife USA

Ka-Bar U.S.M.C Fighting Knife The most famous fixed blade knife in the World - "the KA-BAR" - was designed to serve our troops during World War II and is still doing its job, with honors, more than 50 years later. 1095 carbon steel blade, epoxy powder coated. Stacked leather handle Blade length 7", overall length 11 7/8" 0.68 lbs (blade only) with U.S.M.C. tang stamp. Brown leather USMC embossed sheath included. Knife USA

The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II.  This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.

SPECIFICATIONS:

--Overall Length: 12"

--Blade Length: 7"

--Blade Thickness: 3/16"

--Blade Steel: SK5

--Blade Hardness: 58-60 HRC

--Blade Style: Fixed double edge dagger symmetrical blade

--Coating: Black Powder Coat

--Sheath: Black Plastic injection molded Sheath with nylon hanger

--Weight: 0.444 LBS (Knife)

Taiwan --Be advised, some jurisdictions have restrictions on double edge blades.  Be sure of your laws as they apply.

Old Hickory 7" Kitchen Butcher Knife.

First introduced in 1924, the Old Hickory® knives are the most venerable product line still in active production. The Old Hickory® knives feature a hardwood handle secured with brass compression rivets to 1075 carbon steel blades that are both very sharp and capable of retaining an edge better than most stainless knives. Proudly manufactured with artisan processes for over 90 years, Old Hickory® has stood the test of time and is proven to be the best carbon steel kitchen cutlery sold today.

USE & CARE

Please note that the Old Hickory knives are made with carbon steel.  We have been making Old Hickory since the early 1900's.  Carbon steel knives require extra care to prevent rusting and oxidation of the surface.  Old Hickory should not be placed in a dishwasher or allowed to soak in a sink.  We recommend cleaning the blade with a damp sponge or cloth and dry thoroughly.  Some people go a step further and apply a light coating of vegetable oil to the blades surface. If your blade shows signs of rust, use some steel wool to remove it and then apply some oil to the blade.   To keep the blade razor sharp, use a honing steel, sometimes referred to as sharpening steel, or sharpening stick. After years of use, the steel blade will develop a patina, a darkening which is desirable and an indication of its age.  Old Hickory knives are durable and affordable, but do require special care. 

USA

Old Hickory 7"  Kitchen Cleaver  

First introduced in 1924, the Old Hickory® knives are the most venerable product line still in active production. The Old Hickory® knives feature a hardwood handle secured with brass compression rivets to 1075 carbon steel blades that are both very sharp and capable of retaining an edge better than most stainless knives. Proudly manufactured with artisan processes for over 90 years, Old Hickory® has stood the test of time and is proven to be the best carbon steel kitchen cutlery sold today.

USE & CARE

Please note that the Old Hickory knives are made with carbon steel.  We have been making Old Hickory since the early 1900's.  Carbon steel knives require extra care to prevent rusting and oxidation of the surface.  Old Hickory should not be placed in a dishwasher or allowed to soak in a sink.  We recommend cleaning the blade with a damp sponge or cloth and dry thoroughly.  Some people go a step further and apply a light coating of vegetable oil to the blades surface. If your blade shows signs of rust, use some steel wool to remove it and then apply some oil to the blade.   To keep the blade razor sharp, use a honing steel, sometimes referred to as sharpening steel, or sharpening stick. After years of use, the steel blade will develop a patina, a darkening which is desirable and an indication of its age.  Old Hickory knives are durable and affordable, but do require special care. 

USA

Old Hickory 7" HOP knife features high carbon steel blade. Full tang construction. Genuine hickory handle. 11 3/4" overall. Made by Ontario Knife Company USA. NOTE: Old Hickory knives are produced from the finest High Carbon Cutlery Steel. For best results, hand wash and dry completely to prevent rusting. With continued use, blade may tarnish - your guarantee of Genuine High Carbon Steel. Tarnishing will NOT affect the blade's cutting efficiency.

BlackJack Model 7 Commando with Stacked Leather Handle. 7" convex grind A-2 Tool Steel Blade. Aluminum guard and pommel. Leather belt sheath. 12 1/4" overall. USA NOTE: A-2 Tool Steel is a high carbon steel and is NOT stainless. It is the nature of this steel to rust and discolor and is not a flaw. Keep the blade clean and lightly oiled to help maintain the finish.

Blackjack Classic Blades Model 7 Stag handle Carver style (no pommel) Aluminum double guard 7" convex ground A-2 Tool Steel Cryo blade. Leather sheath Made in USA A2 is a high carbon steel. While considered by many to be a superior hard use steel it is prone to discoloration, tarnish and rust. Use appropriate care. Stag is a natural material and your knife may vary from the one pictured.

Blackjack Model 3 Fixed blade knife with Stacked Leather and Stag Handles. The Model 3 is a larger field belt knife well suited for hunting, camping and other ourdoor adventures that require a dependable knife. Features Tool Steel blade which is considered by many to be superior to stainless for strength and ease of sharpening. SPECIFICATIONS: --Blade Steel: A2 Tool Steel --Blade Shape: Upswept Skinner --Blade Edge: Plain Edge --Blade Grind: Convex --Blade Finish: Satin --Handle: Stacked Leather and Stag with Micarta Spacers --Tang: Narrow Full Length --Guard: Polished Double --Pommel: Polished --Lanyard Hole: Yes --Blade Length: 7" --Blade Thickness: 0.220" --Overall Length: 12 1/8" --Premium Leather Sheath --Brand: BlackJack Classic Blades --Model Number: 3 --Item Number: BJBCB3S Country of Origin: USA NOTE: A2 Tool Steel is a superior high carbon steel that works well in heavy duty fixed blade knives. A2 is NOT stainless. Keep clean, dry and lightly oiled to help preserve the blade finish. No matter how hard you try, some freckling and rusting will likely occur. This is not a defect, but simply your guarantee you have a genuine High Carbon steel blade. USA

Blackjack Model 3 Fixed blade knife with smooth Black Micarta Handle. The Model 3 is a larger field belt knife well suited for hunting, camping and other ourdoor adventures that require a dependable knife. Features Tool Steel blade which is considered by many to be superior to stainless for strength and ease of sharpening. SPECIFICATIONS: --Blade Steel: A2 Tool Steel --Blade Shape: Upswept Skinner --Blade Edge: Plain Edge --Blade Grind: Convex --Blade Finish: Satin --Handle: Smooth Black Micarta with Red and White Spacers --Tang: Narrow Full Length --Guard: Polished Double --Pommel: Polished --Lanyard Hole: Yes --Blade Length: 7" --Blade Thickness: 0.220" --Overall Length: 12 1/8" --Premium Leather Sheath --Brand: BlackJack Classic Blades --Model Number: 3 --Item Number: BJBCB3BM Country of Origin: USA NOTE: A2 Tool Steel is a superior high carbon steel that works well in heavy duty fixed blade knives. A2 is NOT stainless. Keep clean, dry and lightly oiled to help preserve the blade finish. No matter how hard you try, some freckling and rusting will likely occur. This is not a defect, but simply your guarantee you have a genuine High Carbon steel blade. USA