FIXED BLADE KNIVES

Blackjack Model 5 with Stacked Leather Handle. 5.5" A2 steel blade. 10 3/8" Overall length. Double guard. Leather sheath belt sheath. Knife and sheath made in USA by Bark River.

Ka-Bar EK50 Commando Short Clip Point Blade.

  The EK50 Short Clip Point has a 1095 Cro-Van clip point blade that measures 5.0625” in length.  The EK50 is 9.25” overall and weighs 0.65 lb.  A MOLLE compatible Celcon® sheath that is manufactured in the USA comes with the EK50.  Knife manufactured in the USA with German steel.

SPECIFICATIONS:--WEIGHT:  0.65 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  5.062 inches--OVERALL LENGTH:  9.25 inches--EDGE ANGLES:  20--SHAPE:  Clip Point--TANG STAMP:  KA-BAR/Ek Commando--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Ultramid--ROCKWELL HARDNESS:  56-58--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.312 inches      USA

The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II.  This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.

SPECIFICATIONS:

--Overall Length: 12"

--Blade Length: 7"

--Blade Thickness: 3/16"

--Blade Steel: SK5

--Blade Hardness: 58-60 HRC

--Blade Style: Fixed double edge dagger symmetrical blade

--Coating: Black Powder Coat

--Sheath: Black Plastic injection molded Sheath with nylon hanger

--Weight: 0.444 LBS (Knife)

Taiwan --Be advised, some jurisdictions have restrictions on double edge blades.  Be sure of your laws as they apply.

Ontario Mark 3 Model O Navy Dive Knife This knife is used exclusively by U.S. Naval Forces. Ontario Knife Company has produced the this knife for many decades and it has seen combat with U.S. armed forces. Needless to say, these veteran blades are not in the business of giving quarter.FEATURES AND SPECIFICATIONS:--BLADE COLOR: Black--BLADE FINISH: Black Oxide--BLADE GRIND: Flat Bevel w/ Secondary Flat Bevel--BLADE LENGTH: 6.0 in (15.2 cm)--BLADE MATERIAL: Stainless Steel--BLADE THICKNESS: 0.165 in (0.419 cm)--EDGE TYPE: Plain--HANDLE COLOR: Black--BLADE HARDNESS: 49-54 HRC--NATIONAL STOCK NUMBER: 1095-00-391-1056--OVERALL LENGTH: 11.1 in (28.2 cm)s--SHEATH: Black Molded Plastic--SHEATH TYPE: Belt Clip--Weight: 1.2 (Lbs)--UPC: 071721-0-6141-0 Made in the USA

Modified (rounded) pommel. Folks, this is a great camp and field knife. Best materials for such an application - great ergonomics - and USA made. What's not to like!!! Full lifetime warranty from ESEE. SPECIFICATIONS AND FEATURES --Blade Steel: 1095 High Carbon Steel** --Blade Finish: Black Powder Coat --Blade Grind: Flat --Blade Shape: Drop Point --Blade Edge: Plain Edge --Hardness: 55-57RC --Handle: 3-D Contoured Micarta --Pommel: Modified (rounded) --Construction: Full Tang --Brand: ESEE Knives --Model Name: 4 Series --Item Number: ESEE4PB017 --Model Number: 4PB-017 --Blade Length: 4 1/2" --Cutting Edge: 4 3/8" --Max Blade Thickness: 0.185" --Overall Length: 9" --Handle Length: 4 1/2" --Handle Thickness: 0.56" --Lanyard Hole: Yes --Weight: 7.5 oz (Knife Only) --Sheath: Molded Hardshell - Black - Clip Plate - Paracord - Cord Lock Country of Origin: USA **ESEE knives are made from 1095 High Carbon Steel. While 1095 is a top choice for professional cutlery designed for hard use, it will rust and stain if not properly cared for, especially on the cutting edge and around the laser engraving. It is the user's responsibility to keep the blades properly lubricated and cleaned. ESEE Knives suggest using a dry film rust inhibitor such as Tuf-Glide or Tuf-Cloth. We use it here in the store and at home. Great stuff.

ESEE 5 featuring a 5 1/4" black plain edge drop point blade of 1095 high carbon steel.    3-D Black and Gray sculpted G-10 handle scales over full tang construction.  11" overall length.  Black Kydex Sheath.

USA

Blackjack Classic Blades Model 16SSP Jet Pilot with Genuine Red Stag Handle and Sambar Stag Pommel. A beautiful and well made fixed blade suitable for a center display or heavy work in the field.  Includes MOLLE compatable leather belt sheath.

SPECIFICATIONS:--Blade Length:  5.5"--Cutting Edge:  4.625"--Handle Length:  4.75"--Overall Length:  0.25"--Blade Material:  A2 Tool Steel--Blade Thickness:  0.21"--Blade Style:  Drop Point--Blade Grind:  Convex--Blade Finish:  Satin--Handle Material:  Red Stag with Sambar Stag Pommel--Handle Thickness:  1.13"--Sheath:  Leather--Weight:  8.4 oz.  Made in USA Red Stag and Sambar Stag are a naturally occurring material.  Size, weight, coloration and shape may vary. NOTE:  A2 is a non-stainless tool steel and may discolor or rust.  This is not a flaw in the steel, but simply a characteristic.  Keep blade clean, dry and oiled to help preserve the finish if you so choose.

Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.

  The most famous fixed blade knife in the World.  The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC.  Hard plastic MOLLE compatible sheath included.

SPECIFICATIONS:--WEIGHT:  0.7 lb--BLADE LENGTH:  7 inches--OVERALL LENGTH:  11.875 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Clip Point--TANG STAMP:  USMC--NSN:  1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Stacked Leather--ROCKWELL HARDNESS:  56-58--BUTT CAP/GUARD:  12GA Commercial Grade Carbon Steel--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  1.188 inches--KNIFE:  USA --SHEATH:  Taiwan

The characteristic design, the Tracker concept with two separate blades, the shock-resistant 1095 carbon steel and the remarkable price-performance ratio quickly made the Boker Plus Mini Tracker by Dave Wenger a top seller in the bushcraft and outdoor scene. While the front part of the Tracker's larger variants is primarily suitable for chopping and splitting, the blade shape of the smaller dimension of the new Boker Plus Micro Tracker shows completely different advantages and qualities. The Micro Tracker shares the advantages of the two grinding angles on one blade with its big brothers. In addition, the front half of the blade in the smaller format is excellent for working on a cutting board and the strong tip is excellent for opening boxes in everyday use. The small nose, which separates the two grinds, pulls powerfully into the cut in soft materials and is predestined for clipping cords, lines and belts. The field and 3D archer appreciates the compact dimensions, the powerful tip and the archaic appearance when working out mis-shot arrows. The Boker Plus Micro Trapper has the same indestructible materials and finish of the Mini Tracker. The three carefully recessed and chamfered hollow brass studs in the handle add a visual highlight. Supplied with a belt adapter and a custom-fit Kydex sheath.

SPECIFICATIONS:--Overall Length:  7.48 in--Blade Length:  3.54 in--Blade Thickness:  0.16 in--Weight:  5.61 oz--Designer:  Dave Wenger--Blade Material:  1095--Handle Material:  Brown Micarta--Blade Color:  Black--Sheath Material:  Kydex   PRC

The US knifemaker, Dave Wenger can be forgiven for the miss-spelling of the German word "wichtig" if the result is such an impressive knife. Equipped with the genes of the Boker Plus Mini Tracker, the full tang Vigtig is a uncompromising backup knife for nature-loving bushcrafters. The blade made of 1095 carbon steel and Scandi grind is coated with an abrasion-resistant powder coating that offers excellent corrosion protection. The contoured micarta handle scales provide a firm grip in any situation and are fitted with three hollow brass studs, which can also be used as a lanyard hole. Supplied with a custom-fit Kydex sheath and belt adapter.

SPECIFICATIONS:--Overall Length:  7.76 in--Blade Length:  3.54 in--Blade Thickness:  0.16 in--Weight:  6.74 oz--Designer:  Dave Wenger--Blade Material:  1095--Handle Material:  Micarta--Sheath Material:  Kydex    PRC

The Boker Plus Mini Tracker, designed by Dave Wenger, quickly became a favourite in the camping and bushcraft scene, as the sturdy outdoor knife with its massive blade made of 1095 carbon steel and corrosion-resistant powder coating is still convincing all along the line. The fully-grown Boker Plus Tracker is now pulling out of its slipstream. The same materials, the same features, but an incomparable performance! The top-heavy blade of the solid survival knife is equipped with two different grinding surfaces and is ideal for chopping, cutting, scraping, digging and levering. The optimal balance of blade thickness and length as well as the ergonomic shape of the finely textured Micarta handle scales allow for fatigue-free work. The handle has three decorative hollow brass rivets, the rear of which can be used as a lanyard hole. Supplied with a belt adapter and a custom-fit Kydex sheath.

SPECIFICATIONS:--Overall Length:  12.28 in--Blade Length:  7.20 in--Blade Thickness:  0.24 in--Weight:  16.72 oz--Designer:  Dave Wenger--Blade Material:  1095--Handle Material:  Micarta--Handle Color:  Brown--Blade Color:  Black--Item Number:  02BO073   PRC

Condor 2836-2.3HC Blue River Neck Knife.

The Blue River Neck Knife is a compact and sturdy piece of art.  This small fixed blade knife rides over your neck in a beautiful and uniquely styled leather sheath.  A sweet set-up you can have with you all the time. 

SPECIFICATIONS:

--BLADE:  2.32 in (59 mm)

--OAL:  5.00 in (127.0 mm)

--BLADE THICKNESS:  0.12 in (3.0 mm)

--WEIGHT:  2.47 oz (70.0 g)

--BLADE MATERIAL:  1095 High Carbon Steel

--BLADE GRIND:  Flat Grind w/ Secondary Bevel

--HANDLE:  Walnut and Reconstituted Turquoise Stone

--SHEATH:  Hand Crafted Welted Leather with leather neck strap

El Salvador