Menu
Filter By
FIXED BLADE KNIVES
Active filters
- Categories: Hunting Knives
-
![Hookset 6" Saltwater Cleaver]()
![]()
- Out of Stock
Hookset 6" Saltwater Cleaver
$25.95The Buck 150BLS Hookset 6" Saltwater Cleaver features a sturdy 6" gray Titanium coated 5Cr15MoV Stainless blade. Blue and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC -
![Hookset 6" Saltwater Filet]()
![]()
- Out of Stock
Hookset 6" Saltwater Filet
$29.95The Buck 145BLS Hookset 6" Saltwater Filet Knife features a flexable 6" flat ground gray Titanium coated 5Cr15MoV Stainless blade. Blue and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC -
![Hookset 6" Freshwater Filet]()
![]()
- Out of Stock
Hookset 6" Freshwater Filet
$25.95The Buck 144ORS Hookset 6" Freshwater Filet Knife features a flexable 6" flat ground 5Cr15MoV Stainless blade. Orange and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC -
![Hookset 9" Saltwater Filet...]()
![]()
- Out of Stock
Hookset 9" Saltwater Filet...
$33.95The Buck 147BLS Hookset 9" Saltwater Filet Knife features a flexable 9" flat ground gray Titanium coated 5Cr15MoV Stainless blade. Blue and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC -
![Hookset 9" Freshwater Filet]()
![]()
- Out of Stock
Hookset 9" Freshwater Filet
$29.95The Buck 146ORS Hookset 9" Freshwater Filet Knife features a flexable 9" flat ground 5Cr15MoV Stainless blade. Orange and Gray Polypropylene with TPA Rubber handles over full tang construction for sure control in wet enviornments.
Injection molded plastic sheath with integral belt loop and drain hole.
PRC -
![Extreme Survival Lg Fixed Blad]()
- Out of Stock
Extreme Survival Lg Fixed Blad
$49.98Schrade Extreme Survival Griffin Designed Large and robust fixed blade. Features a 6 1/2" 400 series stainless steel plain edge coated blade of 1/4" stock. Full tang construction. Black kraton handle slabs. 12 1/8" overall. Black nylon sheath with hardshell liner and accessory pouch. Imported.
-
![Schrade Pro Hunter]()
- Out of Stock
Schrade Pro Hunter
$34.97The Schrade Uncle Henry Pro Hunter features a 3 1/2" hollow ground plain edge blade of 400 series stainless steel. Full tang construction. Brass guard and pins. Lanyard hole with leather thong. Contoured Stagalon composite handles for durability. Fitted leather sheath. Imported. -
![Province]()
![]()
- Out of Stock
Province
$280.00Spyderco FB45GP Province Plain Edge Fixed Blade Knife. The Spyderco Province is designed by Darrin Sanders and Jim Ankerson. The Province is a large solid bowie style knife that is up to the most demanding tasks in the wilderness (or the backyard). Featuring CPM 4V tool steel, full tang construction and contoured ergonomic black G-10 handle scales this knife is built to be used. SPECIFICATIONS: --Blade Steel: CPM 4V Tool Steel --Blade Shape: Clip Point Bowie --Blade Grind: High Saber with swedged tip --Blade Edge: Plain Edge --Handlel Material: Countoured Black G-10 over full tang construction. --Blade Length: 6.76" --Overall Length: 12.27" --Weight: 11.4 oz Premium Leather Sheath included. --Brand: Spyderco --Model Name: Province --Model Number: FB45GP --Item Number: SCFB45GP Country of Origin: Tiawan -
![Spyderco Respect Bowie]()
![]()
- Out of Stock
Spyderco Respect Bowie
$462.00Spyderco founder Sal Glesser has always liked Bowie knives, and he designed the Respect Bowie to pay tribute to the classic American Bowie Knife. Though the design is classic, with it's full guard and clip point blade, it has been constructed using modern materials. The blade of the Respect Bowie is crafted from CPM 154 stainless steel. The blade is an impressive .300 inch think at the spine and ricasso, but is flat ground over its entire 1.5 inch width to ensure an edge that can handle fine cutting tasks. The unsharpened swedge on the spine of the knife guarantees an acute point and exceptional piercing ability. The Respect's guard is machined from stainless steel and then press fit to the tang and shoulder of the blade. The guard is then secured with contoured G-10 scales that have machined cavitites to completely envelop the hidden tang. These scales are then secured with stainless steel Torx fasteners to achieve an one piece handle feel that highlights the ergonomics of the handle. In a nod to tradition, the Respect ships with a high quality, hand crafted leather sheath. The sheath features a conventional belt loop along with a brass stud, which not only secures the leather retaining strap but also prevents the sheath from slipping down when worn inside the waistband. Specs: Weight: 11.2 ounces Overall Length: 13.15" Blade Length: 7.94" Blade Steel: CPM 154 Blade Thickness: 0.300" Blade Shape: Clip Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: G-10 Sheath: Leather with Belt Loop Country of Origin: USA -
![Spyderco Waterway]()
- Out of Stock
Spyderco Waterway
$175.00The Spyderco Waterway was designed by knife enthusiast and professional kayak fisherman Lance Clinton. The Waterway is the result of Clinton's vision for an ultra corrosion resistant knife for fishing tasks, that would still remain well suited to general outdoor and utility use. To achieve that vision, the Waterway is contructed from LC200N steel, a state of the art high nitrogen alloyed tool steel that offers extreme corrosion resistance and toughness even at high hardness. To maximize it's strength and balance, the Waterway features full tang construction. The G10 handle scales have been 3D machined with a raised diamond pattern to provide a non-slip grip in any environment. These scales are attached via a specialized process which uses blind pins and a high strength industrial adhesive to ensure a permanent, water tight bond. The Waterway ships with a custom molded Boltaron sheath with a versatile G-Clip attachment. The snap-fit sheath retains the knife securely, while still allowing a smoth draw and easy access to the knife. The G-Clip can be configured to provide a full range of carry options. Specs: Weight: 4.3 ounces Overall Length: 9.5" Blade Length: 4.44" Blade Steel: LC200N Blade Thickness: 0.120" Blade Shape: Drop Point Blade Grind: Full Flat Blade Finish: Satin Handle Material: 3D Machined G10 Country of Origin: USA -
![Enuff Clip Point]()
- Out of Stock
Enuff Clip Point
$99.90This Spyderco Enuff fixed blade features a 2.75" flat ground Clip Point Plain Edge blade of VG-10 stainless steel. Full skeletonized tang construction. Black FRN handle scales with bi-directional texturing. Black injection molded polymer sheath with Spyderco's G-Clip which supports both belt carry and clip-style inside the waistband carry. The G-Clip is configurable for vertical, horizontak or diagon canted carry and can be attached to both sides and both faces of the symmetrical sheath. 6 3/4" overall length. Seki City -
![Jumpmaster 2 SE]()
![]()
- Out of Stock
Jumpmaster 2 SE
$210.75The original Spyderco Jumpmaster was developed for use by military jumpmaster personnel as an emergency cutting tool to free hung paratroopers. A distinguished member of the Spyderco Salt Series of knives, its 100% rustproof H-1 steel blade and fully serrated SpyderEdge not only made short work of military static lines, it also offered the greatest edge retention of any knife Spyderco has ever made. The Jumpmaster 2 continues that tradition, taking the extreme cutting power of a fully serrated H-1 blade and packing it into a do-everything leaf-shaped profile that eagerly tackles all cutting tasks. SPECS: --Overall Length: 9.33" --Blade Length: 4.49" --Cutting Edge: 4.03" --Blade Thickness: 0.11" --Blade Material: H-1 --Blade Style: Drop Point --Blade Grind: Hollow --Blade Finish: Satin --Edge Type: Spyderedge --Handle Length: 4.84" --Handle Material: FRN --Handle Color: Black --Sheath: Black Polymer --Weight: 5.30 oz. Seki City -
![Aqua Salt Black Serrated]()
![]()
- Out of Stock
Aqua Salt Black Serrated
$109.900The Aqua Salt features a black Titanium-carbonitride (TiCN) coated4 3/8" Serrated edge blade of H1 Stainless Steel which is 100% rustproof. Black FRN handle. Black hard sheath with G-Clip multi-position belt fastner. 9 1/2" overall. Seki City Seki City.
-
![Fixed Blade Hunter]()
- Out of Stock
Fixed Blade Hunter
$15.99Rough Ryder 1985 Fixed Blade Hunter. Features a 4" hollow ground plain edge blade. Brown sculpted wood handle. Full tang construction. Black nylon belt sheath with hardshell insert. 8 1/2" overall PRC
-
![Swingblaze Orange]()
- Out of Stock
Swingblaze Orange
$59.95Rotates from a drop-point skinner to the ultimate gutting blade. Cuts under the skin to open game like a zipper. Non-slip Blaze Orange Kraton handle. 3 5/8" AUS8 stainless blade. Comes with fitted nylon covered hard shell belt sheath. Imported. -
![Blackwood Hybrid Hunter]()
- Out of Stock
Blackwood Hybrid Hunter
$46.97Designed by custom knifemaker Neil Blackwood, the Hybrid Hunter is a perfectly balanced, light-weight deep bellied drop-point for all outdoor uses. The shaving-sharp AUS-8 stainless steel blade is subzero-tempered to ensure superior edge retention and performance. Rubberized Kraton handle features three holes to reduce weight and improve grip and balance. Complete with quality Cordura Nylon belt sheath. Blade length: 3 7/8" Overall length: 8 1/8" Seki City
