Menu
Filter By
FIXED BLADE KNIVES
-
![Master Tanto 3V Nightfall]()
- Out of Stock
Master Tanto 3V Nightfall
$196.86Cold Steel proud to introduce the Nightfall Series of Japanese styled blades made from American CPM 3-V high performance powdered steel - with the same design and attention to detail as the much loved San Mai classics but with the addition of this premium American super steel, Cold Steel is excited to usher in a new era of high performance fixed blades for the discerning knife owner. Each of these tough, reliable blades is DLC (diamond like) coated to a rich inky black finish. Highly scratch and wear resistant, and honed to an edge that you would expect on the keenest of razor blades, they are not only super sharp, but built to last! SPECS: -- Weight: 9.5 oz. -- Blade Thickness: 5 mm -- Blade Length: 6" -- Handle: 5 1/2" Long. Kray-Ex -- Overall: 11 1/2" -- Steel: U.S. CPM 3-V High Carbon with DLC Coating. -- Sheath: Secure-Ex® Sheath NOTE: 3V is a high carbon steel. While considered by many as a superior blade steel, 3V is not stainless. Maintain your knife blade properly. Tiawan -
![Safe Maker II]()
![]()
- Out of Stock
Safe Maker II
$34.97CALL TO ORDER. DUE TO PAYPAL RESTRICTIONS PAYPAL NOT ACCEPTED FOR THIS ITEM
Cold Steel 12DCST Safe Maker II. Cold Steel has been making push knives for over a quarter century. Over the years they have continually refined their designs, discarding some features and enhancing others. Constantly striving to produce the best push knife in the world. This Safe Maker series represents the pinnacle of their learning, experience, testing, and development. The blades, shafts, and 'T' shaped tangs are fashioned from one solid piece of Japanese AUS8A Stainless Steel with a stone washed finish, and then subsequently vacuum heat treated and sub-zero quenched for added strength and performance. A textured Kray-Ex handle encapsulates the tang and part of the shaft for added comfort and security. Includes an easily concealable and sturdy Secure-Ex boot/belt sheath. SPECIFICATIONS: --Weight: 2.3oz --Blade Thickness: 4.6mm -Blade Length: 3-1/4" --Blade Steel: Japanese AUS8A w/ Stonewashed Finish --Handle Length/Material: 1-3/4" Kray-Ex --Overall Length: 5" Additional Features: --Secure-Ex® Sheath Taiwan
-
![Safe Maker I]()
![]()
- Out of Stock
Safe Maker I
$43.99Cold Steel Safe Maker I. Double edge push dagger. SPECIFICATIONS: --Overall Length (inches): 6.7/8" --Blade Length (inches): 4.50" --Blade Material: AUS 8A --Blade Finish: Stonewashed --Blade Detail: Plain - Double Edged --Handle Material: Kraton --Carry System: SecureEx Sheath with integral clip Country of Origin: Taiwan NOTE: This is a double edge knife. Some jurisdictions do not allow double edge knives. Please be sure of your local regulations before purchase. -
![Secret Edge PE]()
- Out of Stock
Secret Edge PE
$29.97Rail thin, feather light, and flat like a pancake, ther Secret Edge is suitable for anyone in the market for an unobtrusive, yet highly effective neck knife. Unlike its heavier, bulkier rivals, the Secret Edge is so slim it virtually disappears under clothing and, at 3.2 ounces (including sheath) is a joy to wear without causing neck fatigue. Inspired by the ancient Scottish Skean Dhu, it's thoroughly modern in materials, performance and appearance, and presents a flat ground Japanese AUS 8A Stainless blade that's wide at the base for cutting power and narrow at the tip to assure effortless penetration. The edge is so sharp it will astound your family and friends. And, to assure maximum purchase in such a diminutive blade, the Secret Edge is equipped with an exceptionally thin, flat faux G-10 handle. It has three holes, to reduce weight, and an aggressively textured surface, so it hugs the palm and resists rolling or twisting in the hand. For safety, and to prevent loss, the Secret Edge comes with a correspondingly slim Secure-Ex sheath. It offers reliable retention without compromising speed of access or deployment. SPECS: Weight: 2.4 oz Blade Thickness: 2.5 mm Blade Length: 3 1/2" Handle: 3" Long Faux G-10 Overall Length: 6 1/2" Steel: Japanese AUS 8A Stainless Sheath: Secure-Ex® Neck Sheath with Bead Chain Lanyard Imported -
![Camp-Lore Cody Rowen 2.5]()
![]()
- Out of Stock
Camp-Lore Cody Rowen 2.5
$82.97ESEE Camp-Lore CR 2.5 BO This little bird and trout style knife was designed by Cody Rowen of Rowen Manufacturing. The CR 2.5 is a great small and lightweight fixed blade capable of many tasks around the camp or around the house. SPECIFICATIONS AND FEATURES --Blade Steel: 1095 High Carbon Steel --Blade Finish: Black Oxide --Blade Grind: Flat --Blade Shape: Drop Point --Hardness: 55-57RC --Handle: Orange Micarta --Model Name: CR 2.5 --Item Number: ESEECR25OR --Model Number: Rowen CR2.5-OR --Lanyard Hole: Yes --Blade Length: 2 1/2" --Cutting Edge: 2 3/8" --Blade Thickness: 0.125" --Overall Length: 6 1/4" --Handle Length: 3 3/4" --Weight: 2.5 oz --Use: Field - Hiking - Camping --Top quality leather belt sheath. --Back of spine ground to 90 degrees for optimal use with fire steel. Country of Origin: USA -
![ESEE-4 PE Black Kydex]()
- Out of Stock
ESEE-4 PE Black Kydex
$109.97ESEE 4P-B Fixed Blade with Black 1095 High Carbon Plain Edge Blade and Micarta handles. Modified (rounded) pommel. Folks, this is a great camp and field knife. Best materials for such an application - great ergonomics - and USA made. What's not to like!!! Full lifetime warranty from ESEE. SPECIFICATIONS AND FEATURES --Blade Steel: 1095 High Carbon Steel** --Blade Finish: Textured Black Powder Coat --Blade Grind: Flat --Blade Shape: Drop Point --Blade Edge: Plain Edge --Hardness: 55-57RC --Handle: Linen Micarta --Pommel: Modified (rounded) --Construction: Full Tang --Brand: ESEE Knives --Model Name: 4 Series --Item Number: ESEE-4P --Model Number: 4P --Blade Length: 4 1/2" --Cutting Edge: 4 3/8" --Max Blade Thickness: 0.185" --Overall Length: 9" --Handle Length: 4 1/2" --Handle Thickness: 0.56" --Lanyard Hole: Yes --Weight: 7.5 oz (Knife Only) --Sheath: Molded Hardshell - Black - Clip Plate - Paracord - Cord Lock Country of Origin: USA **ESEE knives are made from 1095 High Carbon Steel. While 1095 is a top choice for professional cutlery designed for hard use, it will rust and stain if not properly cared for, especially on the cutting edge and around the laser engraving. It is the user's responsibility to keep the blades properly lubricated and cleaned. ESEE Knives suggest using a dry film rust inhibitor such as Tuf-Glide or Tuf-Cloth. We use it here in the store and at home. Great stuff.
