FIXED BLADE KNIVES

The Silent Hero will definitely hold up to hard use..There is a lanyard hole in the handle along with another in the finger guard. This is meant to allow the user to add a safety cord in order to improve the grip on the handle, which already allows for a solid grip. The finger-guard hole can also be used to assist in lashing to a spear when the situation warrants it.There is a finger choil up into the blade to give you the ability to choke up and execute precise, fine cuts. The drop point design makes this knife great for slicing and gives the tip extra strength. This knife will be a great knife for bushcraft, survival, and tactical purposes.The black leather sheath is durable and looks great paired with this knife. The Silent Hero is held in place with a single snap loop that curls around the finger guard. It is large enough that it can be used to chop but is also still small enough to complete most of the tasks you can do or want to do with a smaller knife.

SPECIFICATIONS:--Overall Length:  11.25"--Blade Length:  6.38"--Cutting Edge:  5.75"--Blade Thickness:  0.190"--Blade Shape:  Hunters Point--Blade Steel:  1095 --Hardness:  RC 56-58--Blade Finish:  Sniper Gray--Handle Material:  Black Canvas Micarta--Handle Style:  Rocky Mountain Tread--Knife Weight:  12oz--Weight w/ Sheath:  17oz--Sheath Included:  Yes--Sheath Material:  Black Leather--Sheath Clip: Belt Loop  USA

ESEE 5PDT-004 Fixed Blade Knife. Desert Tan plain edge drop point blade with 3D Blood Red/Black G-10 handle scales.
Designed by SERE instructors for downed pilots, then ESEE-5 series is a serious no-nosense survival tool you should not be without. Folks, this is a beast! Comes with ESEE's lifetime warranty.
SPECIFICATIONS AND FEATURES--Blade Finish: Desert Tan Powder Coat--Blade Grind: Flat Saber--Blade Shape: Drop Point--Blade Edge: Plain Edge--Hardness: 55-57RC--Handle: 3D Blood Red/Black G-10--Pommel: Original (sharpened)--Construction: Full Tang--Blade Length: 5 1/2"--Cutting Edge: 5 3/8"--Max Blade Thickness: 0.258"--Overall Length: 11"--Handle Length: 5 1/2"--Handle Thickness: 0.765"--Lanyard Hole: Yes--Weight: 16 oz (Knife Only)--Sheath: Molded Hardshell - Black - Clip Plate - Paracord - Cord Lock - Sheath MOLLE Lock compatable (MOLLE Locks sold separately)
Country of Origin: USA
**ESEE knives are made from 1095 High Carbon Steel. While 1095 is a top choice for professional cutlery designed for hard use, it will rust and stain if not properly cared for, especially on the cutting edge and around the laser engraving. It is the user's responsibility to keep the blades properly lubricated and cleaned. ESEE Knives suggest using a dry film rust inhibitor such as Tuf-Glide or Tuf-Cloth. We use it here in the store and at home. Great stuff

This heavy-duty chopper gets it's shape from it's older sibling, the Kukri Machete. At about 80% the size of the larger version, the Combat Kukri performs just as well at clearing brush and small tree limbs. It's smaller profile makes it a little easier for toting around - at just shy of a pound, it's a more appropriately sized tool for combat carry as well. SPECS: Weight: 0.80 lb. Steel: 1095 Cro-Van Measurements: Blade length 8-1/2"; Overall length: 13-3/8" Grind: Flat Edge Angles: 20 Degrees Handle Material: Kraton G® HRC: 56-58 Stamp: USA Butt Cap/Guard: Powdered Metal Blade Thickness: 0.165 Knife made in USA Sheath made in PRC

 JUNGLAS-II - same as the original JUNGLAS® but now offered in a more compact version that’s two inches shorter than the original.The Junglas® is named after the Colombian police - JUNGLA Compañía Jungla Antinarcóticos special operations forces and was originally designed as a cross between a fixed blade knife and a machete to be employed in Latin American jungle and counter-narcotics operations. The original Junglas now sees service with counter-narcotics operators, adventurers and woodsmen globally.ESEE-Junglas Fixed Blade Knife.  Black Plain Edge Drop Point Blade with Canvas Micarta handle scales SPECIFICATIONS AND FEATURES--Blade Steel:  1095 High Carbon Steel**--Blade Finish:  Textured Black Powder Coa--Blade Grind:  Flat Semi-Saber--Blade Shape:  Drop Point--Blade Edge:  Plain Edge--Hardness:  55-57RC--Pommel: Semi-Rounded--Construction:  Full Tang--Brand:  ESEE Knives--Model Name:  Junglas-II--Item Number:  ESEEJUNGLASIIE--Model Number:  Junglas-II-E--Blade Length:  8 1/2"--Cutting Edge:  8 3/8"--Max Blade Thickness:  0.195"--Overall Length:  14 1/2"--Handle Length:  6"--Handle Thickness:  0.814"--Lanyard Hole:  Yes--Weight: 19.8 oz (Knife Only)--Sheath:  Black Kydex with MOLLE compatable black nylon backing.  Country of Origin:  USA**ESEE knives are made from 1095 High Carbon Steel. While 1095 is a top choice for professional cutlery designed for hard use, it will rust and stain if not properly cared for, especially on the cutting edge and around the laser engraving. It is the user's responsibility to keep the blades properly lubricated and cleaned. --Overall Length: 14.5"--Cutting Edge Length: 7.75"--Overall Blade Length: 8.38"--Blade Width: 2.0"--Weight (Knife Only): 19.8 Ounces--Maximum Thickness: 0.188"--1095 Carbon Steel--Removable Micarta Handles

ESEE 3S-DT-MC Partially Serrated Edge Original Pommel Fixed Blade Knife. This is the model that started it all. After designing the RAT-3 for Ontario Knife Company, it was the first design brought over when ESEE Knives (Formerly RAT Cutlery) was formed. The ESEE-3 is still a favorite among law enforcement and military teams due to its light weight, thin profile and great ergonomics. SPECIFICATIONS AND FEATURES --Blade Steel: 1095 High Carbon Steel --Blade Finish: Textured Desert Tan Powder Coat --Blade Grind: Flat --Blade Shape: Drop Point --Blade Edge: Partially Serrated --Hardness: 55-57RC --Handle: Micarta --Pommel: Original (Pointed not sharpened) --Construction: Full Tang --Brand: ESEE Knives --Model Name: 3 Series --Item Number: ESEE-3S-DT-MC --Model Number: 3S-DT --Blade Length: 3.88" --Cutting Edge: 3.38" --Max Blade Thickness: 0.125" --Overall Length: 8.31" --Handle Length: 4.375" --Handle Thickness: 0.50" --Lanyard Hole: Yes --Weight: 5.2 oz (Knife Only) --Sheath: Molded Hardshell - Olive Drab - Early Clip Plate - MOLLE Locks - Paracord - Cord Lock Country of Origin: USA

ESEE 5 featuring a 5 1/4" black plain edge drop point blade of 1095 high carbon steel.    3-D Black and Gray sculpted G-10 handle scales over full tang construction.  11" overall length.  Black Kydex Sheath.

USA

The Becker/Reinhardt Kukri is a labor of love designed and perfected with Ethan Becker and the Reinhardt Estate. Made from 0.188" thick 1095 Cro-Van steel, the kukri's 13.25" epoxy powder coated blade is proudly embellished with Hank Reinhardt's signature and coupled with Becker's distinct handle shape and a practical polyester sheath. Becker Knives "Work for a living".

SPECIFICATIONS:--WEIGHT:  1.4 lb--BLADE LENGTH:  13.25 inches--OVERALL LENGTH:  18.75 inches--EDGE ANGLES:  20 Degrees--SHAPE:  Kukri--TANG STAMP:  KA-BAR/BK&T--KNIFE MATERIAL:  Black 1095 Cro-Van--GRIND:  Flat--HANDLE MATERIAL:  Ultramid®--ROCKWELL HARDNESS:  56-58--BLADE THICKNESS:  0.188 inches--BLADE WIDTH:  2.375 inches--KNIFE:  USA --SHEATH:  PRC

Ka-Bar 02-1248 Cutlass Machete with Sheath. 

  Perfect for chopping down weeds, clearing a camp site or cutting small limbs and tree branches.  Sold with a Black Hard Plastic/Cordura® sheath.

SPECIFICATIONS:--WEIGHT:  1.1 lb--BLADE TYPE:  Fixed Blade--BLADE LENGTH:  11 inches--OVERALL LENGTH:  16.5 inches--SHAPE:  Cutlass/Khukri--TANG STAMP:  KA-BAR--KNIFE MATERIAL:  Black SK5--GRIND:  Hollow--HANDLE MATERIAL:  Black TPR--ROCKWELL HARDNESS:  52-54--BLADE THICKNESS:  0.165 inches--BLADE WIDTH:  2.375 inches  --Taiwan

The Tom Brown Tracker has been one of the most popular blades produced by TOPS for many years. It is one of the biggest, beefiest multi-tools in existence. Designed by Tom Brown Jr. and featured in the movie "The Hunted". TOPS is proud to present the Tom Brown Tracker in 154cm stainless steel. The Tracker #3 is slightly larger than the Tracker #2 but slightly smaller than the Tracker #1. This design was made for chopping, skinning, carving, gutting, scoring, cutting, slashing, slicing, and just about anything else you would need to do in the wilderness.
SPECIFICATIONS:--Overall Length: 10.75"--Cutting Edge: 5.50"--Blade Thickness: 0.190"--Hardness: RC 58-60 Cryo Treated--Blade Finish: Tumble Finish
--Handle Material: Black Canvas Micarta--Knife Weight: 13.8oz--Weight w/ Sheath: 18.4oz--Sheath Included: Yes--Sheath Material: Black Kydex--Sheath Clip: Rotating Spring Steel--Designer: Tom Brown, Jr.
USA

Originally designed from the Finnish sami knife, used by the Laplanders for all their hunting and bushcraft tasks. These knives have traditionally been flat ground, single or double sided, with a "zero-ground" edge ground to the edge.

It occurred to TOPS that a good idea is still a good idea in a smaller package. The Mini Scandi was a result of the very popular, original Brothers of Bushcraft (BROS-01) knife. It offers all the advantages of a modified Scandi grind in a neck knife, which makes it easily concealable. All of the cutting ability of a larger Scandi that can also fit in your pocket or pack.
SPECIFICATIONS:--Overall Length: 6.13"--Blade Thickness: 0.130"--Hardness: RC 56-58--Blade Finish: Black Traction Coating--Handle Material: Tan Canvas Micarta--Weight w/ Sheath: 3.8oz--Sheath Included: Yes--Sheath Material: Black Kydex--Designer: Leo Espinoza. USA

The Mini Tanimboca Puukko is a great tool for making bushcraft items (utensils, kuksa, baskets, blow guns, etc. are all things that Goran had in mind with this), whittling around the fire, and even accomplishing some EDC uses.
This knife is smaller than most and has no guard (so use caution). The knife can be held close to the cutting edge and in multiple grips. If you like making things with your hands especially in the woods, this knife is going to be a must-have. It has the classic Puukko look, but in a much, much smaller package. The spine is ground to 90 degrees for scraping tasks. Well-rounded Black Canvas Micarta handles make the handle comfortable despite its size. The brown leather sheath is set up for a tip-down neck carry, but also has a loop that will fit most belts.
The Mini Tanimboca Puukko was designed by Goran Mihajlovic, who also designed the original one made by TOPS. Goran is originally from Serbia but grew up in Germany. He has lived in Colombia now for many years. He owns a nature reserve called Tanimboca that houses hundreds if not thousands of species of plant, animal, and insect. Throughout his entire life, he has been a knife user and enthusiast. In recent years he has begun making knives at his forge in the Amazon jungle. He prefers Puukkos for their ability to perform well at large variety of cutting tasks.SPECIFICATIONS:--Overall Length: 4.00"--Blade Thickness: 0.090"--Hardness: RC 56-58--Blade Finish: Tumble Finish--Handle Material: Black Canvas Micarta--Weight w/ Sheath: 2.6oz--Sheath Included: Yes--Sheath Material: Brown Leather. USA

The Brothers of Bushcraft fixed blade is a solid bet for use around the house, around the field and out in the bush.  You will hard pressed to find a better field knife anywhere.

SPECIFICATIONS:

--Overall Length:  10.00"

--Blade Length:  4.75"

--Cutting Edge:  4.50"

--Blade Thickness:  0.190"

--Blade Steel:  1095 

--Hardness:  RC 56-58

--Blade Finish:  Coyote Tan Coating

--Handle Material:  Green Canvas Micarta

--Knife Weight:  9.6 oz

--Sheath Included:  Yes

--Sheath Material:  Coyote Tan Kydex

--Sheath Clip:  Rotating Spring Steel

USA

The KA-BAR Jarosz Turok is made in the USA from 1095 Cro-Van steel. It measures 11.5" overall, features a blade with a 6.25" length and 1.563" width, and is comes with a Celcon® (plastic) sheath. The Jarosz family has a long and proud tradition of working with their hands to produce quality products, from woodworking to general carpentry. Jesse used his family's knowledge, work ethic, and access to equipment at a young age to build the skills that would lead to the creation of Jarosz Knives. SELECT SPECS: --1095 Cro-Van blade steel. --Ultramid handle scales over full-tang constuction. --Blade Length: 6.25" --Blade Thickness: 0.188" --Blade Grind: Flat --Overall Length: 11.5" --Sheath included. USA

Modified (rounded) pommel. Folks, this is a great camp and field knife. Best materials for such an application - great ergonomics - and USA made. What's not to like!!! Full lifetime warranty from ESEE. SPECIFICATIONS AND FEATURES --Blade Steel: 1095 High Carbon Steel** --Blade Finish: Black Powder Coat --Blade Grind: Flat --Blade Shape: Drop Point --Blade Edge: Plain Edge --Hardness: 55-57RC --Handle: 3-D Contoured Micarta --Pommel: Modified (rounded) --Construction: Full Tang --Brand: ESEE Knives --Model Name: 4 Series --Item Number: ESEE4PB017 --Model Number: 4PB-017 --Blade Length: 4 1/2" --Cutting Edge: 4 3/8" --Max Blade Thickness: 0.185" --Overall Length: 9" --Handle Length: 4 1/2" --Handle Thickness: 0.56" --Lanyard Hole: Yes --Weight: 7.5 oz (Knife Only) --Sheath: Molded Hardshell - Black - Clip Plate - Paracord - Cord Lock Country of Origin: USA **ESEE knives are made from 1095 High Carbon Steel. While 1095 is a top choice for professional cutlery designed for hard use, it will rust and stain if not properly cared for, especially on the cutting edge and around the laser engraving. It is the user's responsibility to keep the blades properly lubricated and cleaned. ESEE Knives suggest using a dry film rust inhibitor such as Tuf-Glide or Tuf-Cloth. We use it here in the store and at home. Great stuff.

The Gibson Axe is a small but powerful tool that will feel right at home with you on your backwoods journey.  It features a black stonewashed 1095 high carbon blade with a 2 3/4" cutting edge.  Brown micarta handles over full tang construction for the upmost strength.  4 1/2' wide, 10 1/2" overall and weighs in at 20.5 oz.  Leather sheath included.

USA