KNIVES

The Operator 7 is huge! It has those classic American fighting knife aesthetics that make it look every bit as good as it will perform.Made out of 5/16" thick 1075, the differentially heat treated blade will be impact resistant on the edge with a very strong spine. The handles start with Tan Canvas Micarta on the bottom sandwiched with Black G10 on top that has a great texture for grip. The entire handle is also over 1" thick once assembled to fill out the user's hand much like an ax or hatchet handle would. It's made for the fighters that don't back down. The rounded handles and hand guard make it a joy to use and the finger choil allows the user to get great precision for finer cuts. The six and a half inches of cutting edge will suffice for the vast majority of cutting tasks, and the weight will help the knife to a lot of the work itself. The included Kydex sheath with dangler attachment makes it easy to carry into whatever territory you find yourself. SPECIFICATIONS:--Overall Length:  12.50"--Blade Length:  7.25"--Cutting Edge:  6.50"--Blade Thickness:  0.310"--Blade Steel:  1075 --Hardness:  RC 56-58--Blade Finish:  Midnight Bronze--Handle Material:  Tan Canvas Micarta/Black G10--Knife Weight:  18.9oz--Weight w/ Sheath:  24.5oz--Sheath Included:  Yes--Sheath Material:  Black Kydex--Sheath Clip:  Dangler--Designer:  Leo Espinoza USA

 In the 19th century, the Texas Tooth Pick knife was widespread, especially among farmers and daring soldiers of fortune. A further development of the Navaja knives brought by the Spanish settlers, the Texas version has a strikingly long blade and a generally slender design. These characteristics predestined the Texas Tooth Pick for a variety of tasks. From agricultural purposes such as taking samples to determine the quality of fruit and vegetables, to filleting fish, to the adrenaline-fuelled duels of daredevil duelists, the gentleman's knife covered a wide spectrum. Boker re-interprets the popular design and provides the Urban Texas Tooth Pick with the usual innovative performance. The flipper opens the ball-bearing VG-10 blade with hairline finish in a silky smooth manner and gives the daily cutting tasks a proper spur. In contrast to its historical predecessor, the gentleman's knife is reliably locked in place with a linerlock and thus significantly increases work safety. The curved handle scales are made of exquisite Cocobolo wood and ensure a perfect grip as well as a classic look. The tip-up clip (r) has a stonewash finish and is milled from solid wood. Delivered with a touch of the Wild West. SPECIFICATIONS:--Overall Length:  7.52 in--Blade Length:  3.31 in--Blade Thickness:  0.10 in--Weight:  1.45 oz--Blade Material:  VG-10--Handle Material:  Cocobolo Wood--Opener:  Flipper--Lock Type:  Linerlock PRC

Joe Flowers designed Condor 232-3HC Mini Bushlore Knife.

A compact and stout bush knife, the mini is easy to carry and still provides size and strength for many field and camp applications.

SPECIFICATIONS:

--BLADE:  3 in (76,5 mm)

--OAL:  6.5 in (165 mm)

--BLADE THICKNESS:  0,1 in (3 mm)

--WEIGHT:  2.9 oz (82 g)

--BLADE MATERIAL:  1075 High Carbon Steel

--FINISH:  Blasted Satin

--GRIND:  Scandi

--HANDLE:  Walnut

--SHEATH:  Hand Crafted Welted Leather

El Salvador

Jason Breeden designed Condor 2838-15.5HC Mountain P.A.S.S. Machete.  This is a strong machete up to the toughest clearing around your house or in the jungle.  You can't go wrong with the Mountain P.A.S.S. Machete.

SPECIFICATIONS:

--BLADE:  15.57 in (395.3 mm)

--OAL:  21.78 in (552.9 mm)

--THICKNESS:  0.12 in (3.0 mm)

--WEIGHT:  29.99 oz (850.0 g)

--BLADE MATERIAL:  1075 High Carbon Steel

--BLADE FINISH:  Condor Classic

--GRIND:  Convex

--HANDLE:  Brown Micarta® with red spacers

--SHEATH:  Hand Crafted Welted Leather

El Salvador

LT Wright Overland Machete with Leather Sheath.This machete features American made 1075 high carbon steel with LT's exclusive 2-stage patina.  The benefits of that are ease of field sharpening and help in the rust prevention of the steel. Another great feature to the Overland Machete is the ambidextrous leather sheath with dangler.

SPECIFICATIONS:

--Overall Length: 19″

--Sharpened Edge: 12″

--Steel: 3/32″ (+/-) 1075

--Grind: Convex

--Handle: Natural Micarta

--Finish: Matte

Other Features:

--2-step patina

--Ambidextrous Leather Sheath with dangler.

Bungee Lanyard that acts as a lock for the sheath and a hand loop.

USA

Chris Reeve Large Sebenza 31 Plain Drop Point with Double Thumb Lugs- L31-1000 Sebenza means "work" in Zulu and these knives are intended to do just that. Built with handcrafted care at a production level, the Sebenza 31 has earned a worldwide reputation for rock solid performance and a "bank vault" feel. Offered with a CPM S45VN hollow-ground blade at a 57-58 RC, the Sebenza 31's blade will retain a sharp edge with easy maintenance. The Sebenza 31 uses the Reeve Integral Lock, which is a lock bar integral to the back handle. Pre-bending at the end of the slot causes the spring to move to the base of the blade, thereby locking the blade open. FEATURES: --Reeve Integral Lock with Ceramic Ball Interface --CPM S45VN Drop Point Blade --6AL4V Titanium Handles --Off-set Clip Design SPECIFICATIONS: --Blade Length: 3.61" --Blade Thickness: 0.12" --Handle Length: 4.79" --Overall Length: 8.40" --Weight: 4.7 ounces Country of Origin: USA

Chris Reeve Large Sebenza 31 Plain Drop Point - L31-1000 Sebenza means "work" in Zulu and these knives are intended to do just that. Built with handcrafted care at a production level, the Sebenza 31 has earned a worldwide reputation for rock solid performance and a "bank vault" feel. Offered with a CPM S45VN hollow-ground blade at a 57-58 RC, the Sebenza 31's blade will retain a sharp edge with easy maintenance. The Sebenza 31 uses the Reeve Integral Lock, which is a lock bar integral to the back handle. Pre-bending at the end of the slot causes the spring to move to the base of the blade, thereby locking the blade open. FEATURES: --Reeve Integral Lock with Ceramic Ball Interface --CPM S45VN Polished Drop Point Blade --6AL4V Titanium Handles --Off-set Clip Design SPECIFICATIONS: --Blade Length: 3.61" --Blade Thickness: 0.12" --Handle Length: 4.79" --Overall Length: 8.40" --Weight: 4.7 ounces Country of Origin: USA

Benchmade 15500OR-2 Meatcrafter field and kitchen knife - the ultimate upgrade to the Meatcrafter. When your adventures afield transition to the kitchen, the right cutting tool will make all the difference. The Benchmade 15500OR-2 Meatcrafter is a hybrid hunting fixed blade with a fine, smooth edge to trim, debone, or slice your preferred cuts of meat. Featuring Benchmades new SelectEdge technology, the 28 inclusive edge angle on S45VN stainless steel provides the perfect balance of a fine grain, sharp edge with carefully engineered blade flex. This knife makes just as much sense in the back of your truck as it does in the kitchen drawer. FEATURES: --Blade Edge: Plain --Blade Finish/Color: Orange --Blade Steel: S45VN --Blade Style/Shape: Trailing Point --Handle Material: Carbon Fiber --Lanyard Hole: Yes --MOLLE Compatible: No --Sheath Type: Boltaron SPECIFICATIONS: --BLADE LENGTH - 6.08" | 15.44cm --BLADE THICKNESS - 0.09" | 2.286mm --OVERALL LENGTH - 11.06" | 28.09cm --SHEATH WEIGHT - 1.77oz | 50.18g --KNIFE WEIGHT - 3.24oz | 91.85g --HANDLE THICKNESS - 0.67" | 17.02mm --Brand:  ---Model Number: 15500OR2--Item Number:  BM15500--Country of Origin:  USA

The Spyderco C148PBK Ambitious is a great budget friendly every day carry option.  The Ambitious features a 2 1/4" flat ground plain edge blade of 8Cr13MoV stainless steel.  Black Fiberglass Reinforced Nylon (FRN} handles over dual skeletonized stainless steel liners.  Handles are drilled and tapped for left or right side tip-up or tip-down carry.  Linerlock.   3 1/2" closed.

PRC

Spyderco C261P UpTern. The UpTern features a 2 3/4" full flat ground plain edge blade of 8Cr13MoV Stainless Steel. Brushed Stainless Steel Handles. Pocket clip. Drilled and tapped on all four corners for right or left side tip-up or tip-down carry. Mid-lockback design. 3 3/4" closed. PRC

Turn your overland or hunting campsite into an outdoor kitchen with the new 15500-3 Meatcrafter®. This hybrid hunting fixed blade has a fine, smooth edge to trim, debone, or slice your preferred cuts of meat thanks to the application of Benchmade’s SelectEdge® technology on the CPM-S45VN steel. The Boltaron sheath, OD Green G10 handle, and orange cerakote ring make it a perfect tool for preparing food fireside, butchering, or boning out animals

SPECIFICATIONS:--BLADE LENGTH - 6.08" | 15.44cm--BLADE THICKNESS - 0.09" | 2.29mm--OPEN - 11.06" | 28.09cm--SHEATH WEIGHT - 2.15oz | 60.95g--WEIGHT - 4.52oz | 128.14g--HANDLE THICKNESS - 0.55" | 13.97mm

USA

LT Wright Bushcrafter HC Fixed Blade Field Knife. Features a 4" high saber ground blackened blade of 1075 steel. Matte Black Micarta handles. 8 1/2" Overall. Leather sheath with Ferro Rod loop (rod not included) and belt dangler.

USA

Kershaw 1376 Flatbed
It takes one look at the Flatbed to know that it means business. A tactical folder, this assisted knife has everything Kershaw fans want in a reliable knife. Its tanto blade is great for piecing cuts, and the BlackWash™ blade finish hides use scratches. A BlackWash steel inlay adds a stealthy layer to the G10-textured handle. The overall profile is designed to be big without becoming overbearing, and the deep-carry pocketclip makes it easy to carry. Like a reliable pickup truck, this Starter Series tactical knife works hard and gets the job done.
SPECIFICATIONS:--Blade Length: 3.125 in. (7.9. cm)--Blade Material: 8Cr13MoV--Blade Finish/Coating: Black-oxide BlackWash coating--Blade Thickness: 0.11 in. (2.79 mm)--Closed Length: 4.125 in. (10.5 cm)--Handle Material: Glass-filled nylon, steel inlay--Handle Finish/Coating: Black-oxide BlackWash coating--Handle Thickness: 0.54 in. (13.72 mm)--Overall Length: 7.25 in. (18.4 cm)--Weight: 3.2 oz. (91 g)
PRC

The AMK2213 Mini SERE 2020 is world renown as one of the strongest tactical folders in existence. Originally designed by Al Mar and Colonel Nick Rowe in the early 1980’s for the U.S. Army’s SERE school, today’s updated models are stronger and lighter - the most precisely crafted versions we've ever made. The Mini SERE 2020 features pillar construction, flow through design, and our left/right reversible Deep Carry Pocket Clip that provides discrete carry and delivers the kind of performance you need in the real world.
SPECIFICATIONS:--Total Length: 7 in.--Closed Length: 4 in.--Blade Length: 3 in.--Blade Thickness: 0.12 in.--Blade Material: 8Cr13MoV SS (HRC: 56)
--Blade Style: Talon--Blade Grind: Flat--Blade Finish: Satin--Edge Type: Partially Serrated--Handle Length: 4 in.--Handle Thickness: 0.54 in.--Handle Material: FRN--Color: Coyote Tan--Liners: 420 Stainless Steel, Pocketed in Scale for Thinner Profile--Liner Finish: Satin--Weight: 3.1 oz.--Pocket Clip: Yes, Stainless Steel, Left & Right Reversible--Knife Type: Folding Assisted Opener--Opener: Spring Assist--Lock Type: Liner Lock
PRC