KNIVES

Since its introduction in 2011, Michael Janichs Yojimbo 2 design has earned a respected place in Spydercos product line and legions of devoted followers worldwide. The YoJumbo builds on that success, scaling the design up by over 20 percent and refining its ergonomics to accommodate a wider range of hand sizes. Its formidable four-inch (102mm) Wharncliffe blade is hollow ground for superior edge geometry and features a fully accessible Trademark Round Hole for swift, ambidextrous, one-handed opening. The handles open-backed construction and nested, skeletonized stainless steel liners keep weight to a minimum, while its coarse-textured G-10 scales promote a positive, non-slip grip. A high-strength Compression Lock and four-position pocket clip complete the package, making the YoJumbo a truly formidable cutting tool optimized for personal-defense carry. Specs: Overall Length: 9.29" Blade Length: 3.98" Blade Thickness: 0.145" Blade Steel: Satin CPM-M4 Blade Grind: Hollow Lock Type: Compression Opener: Spyderco Round Hole Weight: 5.3 oz Pocket Clip: 4 position Handle: Jade G-10 USA

The SpyMyto™ is a truly unique folding knife that was inspired by the lionSTEEL® Myto™ and is produced by lionSTEEL exclusively for Spyderco. Its hollow-ground, drop-point blade is crafted from M398—an enhanced version of Böhler-Uddeholm’s M390 capable of achieving extremely high hardness and wear resistance. In addition to a fully accessible Trademark Round Hole, the blade features a removable flipper opener, ball bearing pivot washers, and a beautifully radiused spine. The SpyMyto’s handle consists of a linerless green Micarta scale on one side and a solid titanium scale on the other. The latter forms the foundation of the knife’s stout Reeve Integral Lock (R.I.L.) mechanism, which includes a hardened steel interface/overtravel stop. Both scales have painstakingly machined textured chamfers and are joined by a carbon fiber backspacer. A reversible deep-pocket clip mounts to the butt end of the handle to provide left or right-side tip-up carry. This stunning knife is being released as a Flash Batch—a distinctive, one-of-a-kind expression of a model that has not been previously released. Every knife will be individually serialized with discreetly placed laser engraving.  Limited production of 2000.

SPECS:

--Overall Length:  7.77" 

--Blade Length:  3.32" 

--Steel:  Bohler M398

--Closed Length:    4.45" 

--Weight:  3.6oz

--Blade Thickness:  0.157" 

--Clip Position:  Ambi

--Tip Carry Position:  Tip-Up

--Lock:  R.I.L. 

--Blade Grind:  Hollow

Italy

Spyderco C101MPCW2 Manix 2 This Manix 2 features a sanded but not polished brown canvas micarta handle.  Flat ground plain edge blade of premium CPM Cru-Wear high carbon steel.   Spyderco Ball Bearing lock. Blade length is 3 5/16". 4.9 ounces overall weight. Golden CO USA Earth

NOTE:  Cru-Wear is a high carbon steel and not a stainless steel.  Keep blade clean, dry and lightly oiled to help preserve the finish.

Case XX full size two blade Trapper with 6.5 Bonestag handles.  Features stainless Clip and Wharncliffe blades.  4 1/4" closed.

USA

NOTEL  Bonestag handles vary in appearance.  Picture is representative.

Benchmade 15505 Meatcrafter field and kitchen knife.

  When your adventures afield transition to the kitchen, the right cutting tool will make all the difference. The Benchmade 15505 Meatcrafter is a hybrid hunting fixed blade with a fine, smooth edge to trim, debone, or slice your preferred cuts of meat. Featuring Benchmade’s new SelectEdge technology, the 28 inclusive edge angle on CPM-154 stainless steel provides the perfect balance of a fine grain, sharp edge with carefully engineered blade flex. This knife makes just as much sense in the back of your truck as it does in the kitchen drawer.

FEATURES:

--Blade Edge:  Plain

--Blade Finish/Color:  BeadBlast

--Blade Steel:  CPM-154 

--Hardness:  (58-61 HRC)

--Blade Style/Shape:  Trailing Point

--Handle Material:  Dark Olive Santoprene

--Lanyard Hole:  Yes

--MOLLE Compatible:  No

--Sheath Type:  Boltaron

SPECIFICATIONS:

--BLADE LENGTH - 4"

--BLADE THICKNESS - 0.09" | 2.286mm

--OVERALL LENGTH - 8.86"

--WEIGHT - 2.71 pz 

--HANDLE THICKNESS - 0.67" | 17.02mm

--Brand:  Benchmade

--Model Name:  Meatcrafter

--Model Number: 15505

--Item Number:  BM15505

--Country of Origin:  USA

The mini variant of the quintessential waterman's folder, the versatile Mini Adira™ is a heavy-use EDC built for all tasks in wet environments. Featuring a 3.0” drop-point blade made of CPM-MagnaCut stainless steel, this pocket-ready fisherman’s folder uses an AXIS® Lock mechanism with stainless springs for corrosion resistance, plus high-vis colored details and a useful orange lanyard for easy access. From prepping bait on a hook to slicing lines for a new rig, the Mini Adira™ has got your back on and off the water.

SPECS:

--Closed Length:  4.25'' | 10.8cm

--Handle Thickness:  0.64'' | 16.26mm

--Mechanism:  AXIS® Lock

--Blade Style:  Drop-Point

--Pocket Clip:  Tip-Up Black Oxide Deep Carry

--Blade Finish:  Stonewash

--Handle Material:  Depth Blue Grivory®

--Lanyard Hole:  Yes with Lanyard

--Blade Steel:  CPM-Magnacut

--Weight:  3.09oz | 87.6g

USA

A heavy-use folding knife built for tasks in wet environments — from bait prep to cutting lines to scaling small fish — the Adira™ is truly a waterman’s EDC, crafted to support your outdoor lifestyle on and off the water. Featuring a 3.6” drop-point blade made of CPM-MagnaCut stainless steel, this pocket-ready aquatic folder uses an AXIS® Lock mechanism with stainless springs and takes advantage of hi-vis colored details with a useful orange lanyard for easy pocket access. Sure to be any outdoorsman's favorite folder.

SPECS:

--Open Length:  9'' | 22.86cm

--Blade Length:  3.88'' | 9.86cm

--Blade Thickness:  0.114'' | 2.9mm

--Closed Length:  5.12'' | 13.0cm

--Handle Thickness:  0.663'' | 16.84mm

--Mechanism:  AXIS® Lock

--Blade Style:  Drop-Point

--Pocket Clip:  Tip-up Black Oxide Deep Carry

--Blade Finish:  Stonewash polish

--Handle Material:  Depth Blue Grivory®

--Lanyard Hole:  Yes with Lanyard

--Blade Steel:  CPM-Magnacut

--Weight:  4.23oz | 119.92g

USA

A fisherman’s minimalist, tough-as-nails cutting tool, the Intersect™ is a versatile fixed blade built for convenient and quick access when seconds matter. An EDC for the adventurist, the Intersect™ dons a 2.75” drop-point blade forged of CPM-MagnaCut steel, ideally compact for the finer tasks, complete with handle and spine jimping for secure grip and pinch cuts when wet. Purposefully designed with a quick mount sheath that attaches to pockets, belts, backpacks, waders and beyond, the Intersect™ sits at the nexus of hard-use durability, minimalist utility, and forget-it's-there portability.

SPECS:

--Overall Length:  6.55'' | 16.64cm

--Blade Length:  

2.68'' | 6.81cm

--Blade Thickness:  0.12'' | 3.05mm

--Handle Thickness:  0.625'' | 15.88mm

--Fixed Blade

--Blade Style:  Drop-Point

--Blade Edge:  Plain Edge

--Pocket Clip:  Black Oxide Deep Carry on sheath

--Blade Finish:  Stonewash

--Handle Material:  Depth Blue Santoprene®

--Lanyard Hole:  Yes

--Blade Steel:  CPM-Magnacut

--Weight:  2.36oz | 66.9g

USA

The Undercurrent™ is your reliable fixed blade for hard-use utility while on the water. Featuring a sheepsfoot style blade made of CPM-MagnaCut steel with partial serrations for cutting lines, ropes, and bait, the Undercurrent™ is a cinch to clean. Complete with a Sonar Gray molded sheath that mounts on your belt, pack or boat, with push button retention release for quick access, the Undercurrent™ pulls you in with simplicity and performance that can't be matched.

SPECS:

--Overall Length:  9.4353'' | 23.97cm

--Blade Length:  4.321'' | 10.98cm

--Blade Thickness:  0.12'' | 3.05mm

--Handle Thickness:  0.846'' | 21.49mm

--Fixed Blade

--Blade Style:  Sheepsfoot

--Blade Finish:  Stonewash

--Handle Material:  Depth Blue Santoprene®

--Lanyard Hole

--Blade Steel:  CPM-Magnacut

--Blade Edge:  Partially Serrated

--Weight:  5.38oz | 152.52g

USA

In the years since the 535 Bugout® first hit the market, this slim, lightweight and durable folder has redefined EDC style and versatility from the trail to the workplace and everywhere in-between through all of life’s adventures. The 535-12 Bugout® is an instant eye-catcher in easy-to-maintain CPM-S30V premium stainless steel with a Satin finish and earthtone Tan Grivory® handle scales with gold anodized thumb stud and backspacers for that pop of color. The tool in your outdoor kit that you can’t leave behind. Gear up and bug out.

SPECS:

--Blade Length:  3.235"

--Blade Shape:  Drop Point

--Blade Edge:  Plain Edge

--Blade Finish:  Stonewashed

--Handle:  Tan Grivory

--Axis Lock

--Black reversable pocket clip

--Weight:  1.5 oz

--USA

What began as a quest to perfect the all-purpose outdoor utility folder has evolved into a handy solution for life’s daily tasks and chores, and the 533SL-07 Mini Bugout® is the compact EDC built for daily pocket carry and style. Lightweight, slim, and stylish, yet incredibly strong and durable for its size, the 533SL-07 Mini Bugout® seasonal color variant is an instant eye-catcher in easy-to-maintain CPM-S30V premium blade steel with a Crushed Silver Cerakote® finish and outdoor inspired Sage Green Grivory® handle scales with gold anodized thumb stud for that distinctive Benchmade pop of color.

SPECS:

--Blade Length:  2.82"

--Blade Shape:  Drop Point

--Blade Edge:  Plain Edge

--Blade Finish:  Crushed Silver Cerakote

--Handle:  Sage Green Grivory

--Axis Lock

--Black reversable pocket clip

--Weight:  1.51 oz

--USA

Benchmade 430SBK-02 Redoubt Partially Serrated with D2 Steel.

If there is ever a time when you must go alone, the brand-new 430SBK-02 Redoubt will keep you confident and capable. Made in the USA for when you're your own first responder, the 430SBK-02 Redoubt is a solid EDC for utility and self-defense. Grivory® handles and a drop-point CPM-D2 blade make this modern workhorse Black Class knife a reliable addition to your preparedness kit - or your pocket!

FEATURES:

--Blade Edge: Partially Serrated

--Blade Finish/Color: Black Cerakote

--Blade Steel: CPM-D2

--Blade Style/Shape: Drop-point

--Clip Type: Deep-Carry

--Clip Position: Reversible Tip-Up

--Handle Material: Grivory - Black

--Lanyard Hole: Yes

--MOLLE Compatible: No

SPECIFICATIONS:

--Blade Length: 3.55" | 9.02cm

--Blade Thickness: 0.125" | 3.175mm

--Open Length: 8.29" | 21.06cm

--Closed Length: 4.75" | 12.07cm

--Handle Thickness: 0.61" | 15.49mm

--Weight: 3.7oz. | 104.89g

--Brand: Benchmade

--Model Name: Redoubt

--Model Number: 430SBK-02

--Item Number: BM430SBK-02

Country of Origin: USA

Make the leap from hunt carry to everyday carry. By popular request, the 15536 Taggedout® subtly reconfigures this hunt-optimized folder into a multi-role outdoor EDC. Replacing the thumb hole with an orange anodized thumbstud and bearing an orange anodized lanyard backspacer, this new Taggedout® also trades in the featherweight Grivory® handle for OD Green G10. With a CPM-S45VN blade providing increased edge retention and corrosion resistance, this new Taggedout® is ready to take on everything your adventure has in store

FEATURES:

--Satin finished plain edge clip point blade.

--S45VN stainless blade steel.

--SelectEdge

--OD Green G-10 handle.

--Black hardware with orange thumbstuds and backspacer

--Thumb opening.

--Axis Lock

--Pocket clip reversable for right or left side tip-up carry.

SPECIFICATIONS:

--Blade Length:  3 1/2"

--Closed Length:  4 3/4"

USA

Spyderco C223PYL Para 3 Salt.  Features a 2 7/8" full flat ground satin finished plain edge blade of CPM-MagnaCut stainless steel.  Lightweight Yellow FRN handles.  Compression lock with all black hardware.  Pocket clip reversable for right or left side tip-up carry.  4 1/4" closed.

USA

Spyderco Military 2  

--Blade Steel CPM-CRUWEAR 

--Blade Finish:  Satin

--Blade Grind:  Full Flat

--Blade Edge:  Plain

--Blade Length:  4"

--Length Closed:  5 1/2"

--Handle Material:  Unpolished Brown Micarta over stainless liners.

--Stainless Pocket Clip

--Drilled and tapped on all four corners

--Lock:  Compression  

USA

NOTE:  CRUWEAR is not a stainless steel.  While considered by many to be a superior pocket knife steel, it will stain and corrode.  Keep blade clean, dry and lightly oiled to help preserve the finish.

The smaller - more compact Para 3 features a full flat grind plain edge satin finished 3" blade of CPM CRUWEAR steel. Brown unpolished Canvas Micarta scales over stainless liners. Compression lock. Drilled and tapped on all four corners for tip-up, tip-down left or right side carry. 4 1/4" closed. USA

NOTE:  CRUWEAR is not a stainless steel.  While considered by many to be a superior pocket knife steel, it will stain and corrode.  Keep blade clean, dry and lightly oiled to help preserve the finish.