Filter By
FIXED BLADE KNIVES
Active filters
-
RAT-7 PE
$91.58Features a 7" black phosphate coated plain edge blade of 1095 carbon steel, and a tan canvas Micarta handle. Comes complete with a MOLLE compatable nylon sheath with hard shell insert. Overall length of 12 1/4 in.
USA -
KB/Becker Campanion
$99.97From Ka-Bar, the Becker Campanion Plain Edge Fixed Blade. 5" black plain edge blade of 1/4" thick stock. Full tang construction. 10 1/2" overall. Black nylon sheath with hardshell insert.
Knife made in USA
-
Blackjack 7 Black Micarta
$299.97Blackjack Model 7 with Black Linen Micarta handle. Features a 7 inch A-2 Tool Steel Convex ground blade. Black Linen Micarta handle with red and white spacers. Double guard. Handmade leather sheath. 12 1/4" overall length. USA A2 is a high carbon tool steel. While considered by many to be a superior hard use steel it is prone to discoloration, tarnish and rust. Use appropriate care. -
Ka-Bar U.S. Army Fighting...
$96.90Ka-Bar 1219 U.S. Army marked partially serrated fighting knife.
The traditional KA-BAR marked for Army personnel and featuring a partially serrated edge to aid in cutting synthetic and looped materials. Tang stamped U.S. ARMY. U.S. Army stamped leather sheath included.
SPECIFICATIONS:--WEIGHT: 0.7 lb--BLADE TYPE: Fixed Blade--BLADE LENGTH: 7 inches--OVERALL LENGTH: 11.875 inches--EDGE ANGLES: 20 Degrees--SHAPE: Clip Point--TANG STAMP: U.S. ARMY--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Stacked Leather--ROCKWELL HARDNESS: 56-58--BUTT CAP/GUARD: 12GA Commercial Grade Carbon Steel--KNIFE MANUFACTURED IN: United States--SHEATH MANUFACTURED IN: Mexico--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 1.188 inches
-
KA-BAR Wide Blade Black...
$99.97KA-BAR Wide Blade Black Fighter Features a 8.00 in. clip point partially serrated blade of 1095 carbon steel with black powder coating, and a 4.88 in. black Kraton handle. Comes complete with a leather/Cordura sheath.
-
Ka-Bar Fighter/Utility Black
$89.90Overall Length 11.75' Blade Length 7" High Carbon Black Plain Edge blade. Black Kraton handle. Ful length stick tang construction. Kydex Sheath USA -
Blackjack 7 Natural Micarta
$288.97Blackjack Model 7 Natural Canvas Micarta handle with pommel. Features a 7 inch A2 Tool Steel Convex ground steel blade. Natural Canvas Micarta handle. Aluminum guard and Pommel. Handmade leather sheath. 12 1/4" overall length. USA Note: A2 tool steel is NOT a stainless steel. While considered by many to be a superior steel for field knives it will tarnish and rust. Use appropriate care. -
Blackjack 7 Stacked Leather
$299.97Blackjack Model 7 Stacked Leather. Features a 7 inch A-2 Tool Steel Convex ground steel blade. Leather stacked handle. Handmade leather sheath. 12 1/4" overall length.. USA A2 is a high carbon steel. While considered by many to be a superior hard use steel it is prone to discoloration, tarnish and rust. Use appropriate care. -
AlMar Bread Knife Stainless S
$152.00Al Mar Ultra Chef Stainless Steel 8" Kitchen Bread Knife. The AL MAR all Stainless Steel Ultra-Chef Knives are contemporary in design and state-of-the-art in performance. The one-piece ergonomic, hollow, all stainless steel handles are not only visually stunning and perfectly balanced, they are also impervious to just about everything found in todays kitchen environments. This blade is 420J Stainless Steel. Strong and light in weight, the All Stainless Steel Ultra-Chef Knives are hand sharpened to an incredible edge and each knife is individually gift-boxed. SELECT SPECS: --Blade: 420J Stainless --Edge: Fully serrated --Handle: Stainless Steel --One piece design. --Blade length: 8" --Overall length: 13 3/4" Country of Origin: Japan (Seki City) -
EK Model 50 Commando Short...
$99.97Ka-Bar EK50 Commando Short Clip Point Blade.
The EK50 Short Clip Point has a 1095 Cro-Van clip point blade that measures 5.0625” in length. The EK50 is 9.25” overall and weighs 0.65 lb. A MOLLE compatible Celcon® sheath that is manufactured in the USA comes with the EK50. Knife manufactured in the USA with German steel.
SPECIFICATIONS:--WEIGHT: 0.65 lb--BLADE TYPE: Fixed Blade--BLADE LENGTH: 5.062 inches--OVERALL LENGTH: 9.25 inches--EDGE ANGLES: 20--SHAPE: Clip Point--TANG STAMP: KA-BAR/Ek Commando--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Ultramid--ROCKWELL HARDNESS: 56-58--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 1.312 inches USA
-
Ka-Bar Tanto
$89.90Ka-Bar Tanto 8 Inch Tanto blade of 1095 Steel. Black epoxy powder coat on blade. Kraton G thermoplastic elastomer handle. 12.88 Inches overall length. Molded Kydex sheath. Combo edge. -
Ka-Bar ARMY Fighting Knife
$99.97Ka-Bar ARMY Fighting Knife The most famous fixed blade knife in the World - "the KA-BAR" - was designed to serve our troops during World War II and is still doing its job, with honors, more than 50 years later. 1095 carbon steel blade, epoxy powder coated. U.S. ARMY tang stamp. Stacked leather handle Blade length 7", overall length 11 7/8" 0.68 lbs (blade only) Brown leather ARMY embossed sheath included. Knife USA -
Spartan George Raider Dagger
$99.97The Spartan-George Raider was designed by Les George, a prolific Knife Maker and former U.S. Marine as an homage to the Legendary United States Marine Corps Raider Stiletto of WW II. This sleek and durable dagger while holding to the overall design of the original knife takes advantage of a full tang design, injection molded handles, modern SK5 steel. It is delivered with a knife specific injection molded sheath for a secure carry and protection. This is a dagger that any Marine or soldier would be proud to carry into a dangerous situation or raid. This dagger was designed hilt-heavy to lie in the hand to reduce the risk of dropping. It has double-edge blade with stiletto-sharp tip and diamond-shaped cross section, sharpened on both cutting edges all the way to its the oval cross guard. It has a slender symmetrical grip, with a middle convexity. The original stiletto hilts were die-cast using zinc aluminum alloy to create the handle but, over time it was discovered that the zinc ions in this alloy tended to leach out, leaving the casting extremely brittle. a result, more than half of the few Raider stilettos still in existence today have very fine hilt cracks or entire portions of the hilt missing, with pieces having simply flaked off; many more have replacement handles. Therefore, they chose a full tang design with durable injection molded handles.
SPECIFICATIONS:
--Overall Length: 12"
--Blade Length: 7"
--Blade Thickness: 3/16"
--Blade Steel: SK5
--Blade Hardness: 58-60 HRC
--Blade Style: Fixed double edge dagger symmetrical blade
--Coating: Black Powder Coat
--Sheath: Black Plastic injection molded Sheath with nylon hanger
--Weight: 0.444 LBS (Knife)
Taiwan --Be advised, some jurisdictions have restrictions on double edge blades. Be sure of your laws as they apply.
-
ESEE-5 Black Blade -...
$164.97ESEE 5 featuring a 5 1/4" black plain edge drop point blade of 1095 high carbon steel. 3-D Black and Gray sculpted G-10 handle scales over full tang construction. 11" overall length. Black Kydex Sheath.
USA
-
Ka-Bar U.S.M.C Fighting...
$89.50Ka-Bar 5017 USMC Fighting Knife with Black Hard Plastic Sheath.
The most famous fixed blade knife in the World. The KA-BAR was designed to serve our troops during World War II and is still doing its job, with honors, 70+ years later. Tang stamped USMC. Hard plastic MOLLE compatible sheath included.
SPECIFICATIONS:--WEIGHT: 0.7 lb--BLADE LENGTH: 7 inches--OVERALL LENGTH: 11.875 inches--EDGE ANGLES: 20 Degrees--SHAPE: Clip Point--TANG STAMP: USMC--NSN: 1095-01-581-9100 KNIFE-COMBAT--KNIFE MATERIAL: Black 1095 Cro-Van--GRIND: Flat--HANDLE MATERIAL: Stacked Leather--ROCKWELL HARDNESS: 56-58--BUTT CAP/GUARD: 12GA Commercial Grade Carbon Steel--BLADE THICKNESS: 0.165 inches--BLADE WIDTH: 1.188 inches--KNIFE: USA --SHEATH: Taiwan
-
TOPS Filet/Boning Knife
$159.00TOPS is well-known for making hard-use tactical and survival knives. In recent years however, the lineup of models available through TOPS has opened to a very wide variety of cutlery. Hunting knives, EDC, and even kitchen cutlery. Now TOPS is ready to release their first filet knife.
Finding a middle ground between the flexibility of a filet knife and the rigidity of boning knife, the TOPS Filet is reminiscent of a Japanese gokujo(which means “all-in-one”). It is multipurpose in nature and can be used to bone or filet. The sweeping 154cm blade on the TOPS Filet will make short work of fileting fish and will leave very little waste cleanly trimming meat from bone with precision. The handle is a combination of rubber and G10 that provides a secure grip, which is important when dealing with slippery objects. The OD Green Kydex sheath with a Kydex belt loop will make the TOPS Filet feel equally at home in the field and the kitchen.
SPECIFICATIONS:
--Knife Type: Fixed Blade
--Overall Length: 11.50"
--Blade Length: 8.00"
--Cutting Edge: 7.50"
--Blade Thickness: 0.090"
--Blade Steel: 154cm
--Hardness: RC 58-60 Cryo Treated
--Blade Finish: Tumble Finish
--Handle Material: Tan/Black SureTouch G10
--Knife Weight: 4.2oz
--Weight w/ Sheath: 7.3oz
--Sheath Included: Yes
--Sheath Material: OD Green Kydex
--Sheath Clip: Kydex Belt Loop
--Designer: Leo Espinoza
USA