FIXED BLADE KNIVES

Joe Flowers designed Condor 2814-6.5HC Low Drag Knife.  

The Low Drag fits perfectly between a small  field knive and a large camp knife.  It is large enough to handle difficult tasks, but still in a small enough size to carry daily.

SPECIFICATIONS:

--BLADE:  6.6 in (167,1 mm)

--OAL:  11.6 in (294,1 mm)

--BLADE THICKNESS:  0,2 in (4,5 mm)

--WEIGHT:  12 oz (340 g)

--BLADE MATERIAL:  1075 High Carbon Steel

--BLADE FINISH:  Polished

--BLADE GRIND:  Full Flat w/ Second Bevel

--HANDLE:  Brown Canvas Micarta®

--SHEATH:  Hand Crafted Welted Leather

El Salvador

Designed for those who don’t see Mountains, but Opportunities! When climbing any outdoor challenge, an Explorer and the Mountain forge a PASS together using skill, determination, nature’s openings, and the right tools. Just as the name implies, the new Mountain PASS Series by Condor is designed to help you through the toughest challenges. These designs by Jason Breeden, a West Virginia native who has spent his life in the hills and hollows, are mapped out by following the fundamental principles used by traditional woodsmen. As rugged and venerable as the Appalachians that inspired them, the Mountain PASS Series combines Condor’s craftsmanship with modern materials to prevail through Plain And Simple Survival.

SPECIFICATIONS:

--BLADE:  6.26 in (158.9 mm)

--OAL:  10.57 in (268.3 mm)

--THICKNESS:  0.14 in (3.5 mm)

--WEIGHT:  10.94 oz (310.0 g)

--MATERIAL:  440C Stainless Steel

--FINISH:  Condor Classic

--GRIND:  Flat Grind w/ Second Belvel

--HANDLE:  Micarta®

--SHEATH:  Hand Crafted Welted Leather

El Salvador

--Notice - this is an unsharpened Trainer blade.
The red trainer variant of the SOCP dagger or knife, this training tool integrates into the same sheath that accepts both the 176 and 178 models so the kit placement and training integrate seamlessly with real world application. MOLLE® compatible.
SPECIFICATIONS:
Specifications
--Designer: Greg Thompson
--Blade Steel: 440C
--Blade Finish: Red
--Blade Length: 2.78" | 7.06cm
--Blade Thickness: 0.175" | 4.45mm
--Overall Length: 6.81" | 17.30cm
--Handle Length: 4.03" | 10.24cm
--Handle Thickness: 0.175" | 4.45mm
--Weight: 2.31oz. | 65.49g
--Sheath: Tan Injection Molded Plastic with Clip and Cord
--Sheath Weight: 1.00oz. | 28.35g
TRAINER
USA

Blackjack Model 5 with Stacked Leather Handle. 5.5" A2 steel blade. 10 3/8" Overall length. Double guard. Leather sheath belt sheath. Knife and sheath made in USA by Bark River.

Jason Breeden designed Condor 1827-10.5-4C Chute Knife. 

Holding to classic tactical edged tools that can function in the many fields of operation, Jason Breeden designed his twist on the Tactical P.A.S.S. Chute Knife. Keeping close to the P.A.S.S. roots of function in the outdoors, the Chute Knife has an edge that comes right to the guard, with a customary false edge that flows right into the fuller.

SPECIFICATIONS:

--BLADE:  5.45 in (138.3 mm)

---OAL:  10.54 in (267.6 mm)

--BLADE THICKNESS:  0.14 in (3.5 mm)

--WEIGHT:  14.46 oz (410.0 g)

--BLADE MATERIAL:  440C Stainless Steel

--BLADE FINISH:  Condor Classic

--BLADE GRIND: Flat Grind w/ Secondary Bevel

--HANDLE:  Micarta®

--SHEATH:  Hand Crafted Welted Leather

El Salvador

LT Wright Jet fixed blade field knife.  This Jet features a 4 3/4" full flat ground blade of CPM-3V steel.  Beautiful polished Natural Micarta handles with black spacers over full tang construction.  Copper pins. 

 Sharpened spine for use with fire starter (not included).  9 1/2" overall.   Leather belt sheath.

USA

LT Wright Jet fixed blade field knife.  This Jet features a 4 1/2" full flat ground blade of CPM-3V steel.  Sculpted Mountain Rustic Brown Micarta handles with white spacers over full tang construction.  Copper pins. 

 Sharpened spine for use with fire starter (not included).  9 1/4" overall.   Leather belt sheath.

USA

The Operator 7 is huge! It has those classic American fighting knife aesthetics that make it look every bit as good as it will perform.Made out of 5/16" thick 1075, the differentially heat treated blade will be impact resistant on the edge with a very strong spine. The handles start with Tan Canvas Micarta on the bottom sandwiched with Black G10 on top that has a great texture for grip. The entire handle is also over 1" thick once assembled to fill out the user's hand much like an ax or hatchet handle would. It's made for the fighters that don't back down. The rounded handles and hand guard make it a joy to use and the finger choil allows the user to get great precision for finer cuts. The six and a half inches of cutting edge will suffice for the vast majority of cutting tasks, and the weight will help the knife to a lot of the work itself. The included Kydex sheath with dangler attachment makes it easy to carry into whatever territory you find yourself. SPECIFICATIONS:--Overall Length:  12.50"--Blade Length:  7.25"--Cutting Edge:  6.50"--Blade Thickness:  0.310"--Blade Steel:  1075 --Hardness:  RC 56-58--Blade Finish:  Midnight Bronze--Handle Material:  Tan Canvas Micarta/Black G10--Knife Weight:  18.9oz--Weight w/ Sheath:  24.5oz--Sheath Included:  Yes--Sheath Material:  Black Kydex--Sheath Clip:  Dangler--Designer:  Leo Espinoza USA

Blackjack Classic Blades Model 16SSP Jet Pilot with Genuine Red Stag Handle and Sambar Stag Pommel. A beautiful and well made fixed blade suitable for a center display or heavy work in the field.  Includes MOLLE compatable leather belt sheath.

SPECIFICATIONS:--Blade Length:  5.5"--Cutting Edge:  4.625"--Handle Length:  4.75"--Overall Length:  0.25"--Blade Material:  A2 Tool Steel--Blade Thickness:  0.21"--Blade Style:  Drop Point--Blade Grind:  Convex--Blade Finish:  Satin--Handle Material:  Red Stag with Sambar Stag Pommel--Handle Thickness:  1.13"--Sheath:  Leather--Weight:  8.4 oz.  Made in USA Red Stag and Sambar Stag are a naturally occurring material.  Size, weight, coloration and shape may vary. NOTE:  A2 is a non-stainless tool steel and may discolor or rust.  This is not a flaw in the steel, but simply a characteristic.  Keep blade clean, dry and oiled to help preserve the finish if you so choose.