List of products by brand Tops
-
Earth Skills
$174.97TOPS ESK01 Earth Skills Fixed Blade. The Earth Skills Knife was designed by Matt Graham, who is much more than just a "survivalist". He is an athlete - ultra-marathons, triathlons, rock climbing, etc., a martial artist - several styles, and an expert in primitive weapons, hunting, and shelters. He has more "dirt time" than almost anyone else out there. In keeping with the same theme as his first design through TOPS (the Little Bugger). It's thin with TOPS'; modified Scandi grind, a tumble finish and tan canvas Micarta handle scales. This one comes with a deep carry brown leather sheath that Matt designed based off some old Native American styles of sheath. It is meant to ride cross-draw, underneath the belt, towards the back side of the wearer. Please keep in mind, the stock of this tool is 1/8" thick. Therefore, uses like batoning are not recommended and bent blades due to that type of use will not be covered under the warranty. It is meant for the types of uses you would normally get from a machete. SPECIFICATIONS: --Overall Length: 14.25" --Blade Length: 8.25" --Cutting Edge: 8.25" --Blade Thickness: 0.130" --Blade Steel: 1095 RC 56-58 --Blade Finish: Tumble Finish --Handle Material: Tan Canvas Micarta --Knife Weight: 11.9oz --Weight w/ Sheath: 16.8oz --Sheath Included: Yes --Sheath Material: Premium Brown Leather --Sheath Clip: Belt Loop --Designer: Matt Graham --Brand: TOPS --Model Name: Earth Skills --Model Number: ESK01 --Item Number: TOPSESK01 --Country of Origin: USA -
Devil's Elbow Small Blk PE
$83.97TOPS Devil's Elbow - Small. ure, this may look odd, but numerous training sessions have shown that in well-trained hands, the Devil's Elbow is a great defensive tool. The strategically placed jimping and thumb ramp give the user great purchase in traditional and reverse grips on this knife. Also, it may aid with weapon retention or as at a last ditch stand. SPECIFICATIONS: --Knife Type: Fixed Blade --Overall Length: 4.50" --Blade Length: 1.75" --Cutting Edge: 1.75" --Secondary Edge: 1.25" --Blade Thickness: 0.190" --Blade Shape: Spear Point --Blade Steel: 1095 High Carbon --Hardness: RC 56-58 --Blade Finish: Black Traction Coating --Handle Style: Skeletonized --Knife Weight: 2.9 oz --Weight w/ Sheath: 4.4 oz --Sheath Included: Yes --Sheath Material: Black Kydex --Sheath Clip: Rotating Spring Steel Country of Origin: USA DISCLAIMER: This knife is primarily for use by military, law enforcement, and executive protection specialists. It is incumbent upon the purchaser to be over 18 years of age and to check with local law enforcement personnel regarding legalities of double-edged weapons in his/her area. THIS IS YOUR RESPONSIBILITY. -
Mil-Spie 3 Elite Black
$124.90TOPS Mil-Spie 3 Elite BCM: This version is called the Mil-SPIE Elite. It is the same size and specs as the Mil-SPIE 3, with a few differences. The Elite version is 1095 high carbon steel instead of 154cm, which makes field sharpening much easier. The coyote tan powder coat is suited well for desert environments where many of our military are serving. This version has Black Canvas Micarta handle scales, and it comes with a Kydex sheath with a rotating belt clip. Perfect for military in desert environments, concealed carry, and even in the woods. A classic blade design with a comfortable, thin handle makes this knife easy to use whatever your situation. Aptly named, the Elite is perfect for our military's elite forces. The name Mil-SPIE is an acronym that the DOD came up with several years ago. It stands for Military-Special Projects Individual Equipment - pronounced 'MIL SPY'. This was to enable Special Operation Forces within the Military to help develop, test, evaluate and acquire 'out of the ordinary' and 'outside of normal channels' items that they require. SPECIFICATIONS --Overall Length: 8.00" --Blade Length: 4.00" --Cutting Edge: 3.50" --Blade Thickness: 0.190" --Blade Shape: Hunters Point --Blade Grind: Flat Saber --Blade Edge: Plain Edge --Blade Steel: 1095 High Carbon --Hardness: RC 56-58 --Blade Finish: Coyote Tan Coating --Handle Scales: Textured Black Canvas Micarta --Knife Weight: 5.0 oz --Weight w/ Sheath: 7.2 oz --Sheath Included Yes --Sheath Material: Black Kydex --Sheath Clip: Rotating Spring Steel Country of Origin: USA
-
Shadow Hunter
$159.90Remember the Shadow Hunter? That classic from the TOPS archives, a favorite of TOPS founder Mike. Well, it's making a comeback, and it's not just a trip down memory lane.
This new version has slight modifications to make everything about it better. First, the blade is just a bit longer, which makes it look and perform better. The jimping was repositioned and updated. The finger choil was widened slightly to make it safer. Then the handles are a bit thicker with a better contour to make them much more comfortable for long use. The new finish is Cerakote instead of powder coat, and now it has a Coyote Tan Kydex sheath with a rotating clip. All these changes make this an excellent knife for hunting, camping , or even as a self-defense blade. It's the Shadow Hunter you loved, only better. This isn't just another knife. It's a piece of TOPS history, made relevant for today
SPECIFICATIONS:
--Overall Length: 9.25"
--Blade Length: 4.50"
--Cutting Edge: 4.13"
--Blade Thickness: 0.190"
--Blade Steel: 1095
--Hardness: RC 56-58
--Blade Finish: Tungsten Cerakote
--Handle Material: Tan Canvas/Black Canvas Micarta
--Knife Weight: 10.1oz
--Weight w/ Sheath: 12.8
--Sheath Included: Yes
--Sheath Material: Coyote Tan Kydex
--Sheath Clip: Rotating Spring Steel
USA
-
TEX Creek Sniper Grey
$139.90The "Tex Creek Hunter" is a fine example of a high-quality, good-looking work knife.
The darkened Micarta scales are screwed onto the handle and a large cord holder is accentuated at the back of the handle. The handles are designed and built for a positive grip and for extended periods of use. A simple and usable design is reinforced by a sturdy 3/16" thick blade and full tang handle. This is a knife that performs with excellence in the field and looks and feels like an old trusted friend, anywhere that you go.
SPECIFICATIONS:
--Overall Length: 9.00"
--Blade Length: 4.19"
--Blade Thickness: 0.190"
--Blade Shape: Hunters Point
--Blade Steel: 1095
--Hardness: RC 56-58
--Blade Finish: Sniper Gray
--Handle Material: Black Canvas Micarta
--Knife Weight: 7.1 oz
--Weight w/ Sheath: 9.5 oz
--Sheath Included: Yes
--Sheath Material: Brown Leather
--Sheath Clip: Belt Loop
USA
-
Wild Pig Hunter - Sniper...
$187.50This TOPS Wild Pig Hunter knife is a seriously hardcore design. The 7 1/2" blade is made for deep positive piercing penetration and is combined with a strong puncture point. Each blade is ground from 1/4 inch thick 1095 high carbon steel. TOPS added their new Sniper Gray finish which will give years of dependable service. The handle is green canvas Micarta and with their well known Rocky Mountain Tread which ensures a positive grip even when in wet, muddy, or bloody conditions. The sheath is made in the USA of vegetable tanned, tough steer hide.
SPECIFFICATIONS:
--Overall Length: 13.00"
--Blade Length: 7.50"
--Blade Thickness: 0.250"
--Blade Steel: 1095
--Hardness: RC 56-58
--Blade Finish: Sniper Gray
--Handle Material: Green Canvas Micarta
--Handle Style: Rocky Mountain Tread
--Knife Weight: 14.2 oz
--Sheath Included: Yes
--Sheath Material: Brown Leather
USA
-
MSF Linerlock - Elmax -...
$139.97The Mini Scandi Folder designed by TOPS and made by Maserin has been a welcome addition to the TOPS lineup for several years now. Because of its popularity and functionality, we’ve decided to add another blade option on what is basically the same handle. This new liner lock MSF has G10 handles instead of Micarta. We also wanted to use a “super steel” –Elmax in this case –that we hadn’t used before for the folks that have been wanting high end steels from TOPS. The pivot screw has a little more flare and the pocket clip has been converted to a deep carry clip. It is still reversible for the lefty’s out there too. The other main difference is that this blade is a clip point with a high flat grind instead of a modified Scandi drop point. Once you get this blade in your pocket and start using it, it is sure to become a main choice for EDC folders.
SPECIFICATIONS:
--Overall Length: 7.50"
--Blade Length: 3.25"
--Cutting Edge: 3.25"
--Closed Length: 4.38
--Blade Thickness: 0.130"
--Blade Steel: Elmax
--Blade Finish: Satin
--Handle Material: Black G10
--Knife Weight: 3.8oz
Italy
-
Cuma Tak - RI 2
$188.50A variation of the Kukri, the Cuma Tak RI 2 brings modern design elements to the tried and proven design.
The Cuma Tak is sure to amaze in it's ability to meet challenges in the wilderness.
--Overall Length: 13.50"
--Blade Length: 7.00"
--Cutting Edge: 7.00"
--Secondary Edge: 4.00"
--Blade Thickness: 0.190"
--Blade Steel: 1095
--Hardness: RC 56-58
--Blade Finish: Black Traction Coating
--Handle Material: Black Linen Micarta
--Sheath Included: Yes
--Sheath Material: Black Ballistic Nylon
--Sheath Clip: Molle Backing
USA
-
Silent Hero 04 Sniper Grey
$169.90The Silent Hero 04 with Smooth Black Canvas Micarta Handle will definitely hold up to hard use. And with a weight of only 12 oz, you'll be able to use the knife without getting fatigued too quickly.
There is a lanyard hole in the handle along with another in the finger guard. This is meant to allow the user to add a safety cord in order to improve the grip on the handle, which already allows for a solid grip. The finger-guard hole can also be used to assist in lashing to a spear when the situation warrants it.
There is a finger choil up into the blade to give you the ability to choke up and execute precise, fine cuts. The drop point design makes this knife great for slicing and gives the tip extra strength. So this knife will be a great knife for bushcraft, survival, and tactical purposes.
The black leather sheath is durable and looks great paired with this knife. The Silent Hero is held in place with a single snap loop that curls around the finger guard.
The Silent Hero is a great design and a very versatile blade. It is large enough that it can be used to chop but is also still small enough to complete most of the tasks you can do or want to do with a smaller knife.
SPECIFICATIONS:
--Overall Length: 11.25"
--Blade Length: 6.38"
--Cutting Edge: 5.75"
--Blade Thickness: 0.190"
--Blade Shape: Hunters Point
--Blade Steel: 1095
--Hardness: RC 56-58
--Blade Finish: Sniper Gray
--Handle Material: Black Canvas Micarta
--Handle Style: Smooth
--Knife Weight: 12oz
--Weight w/ Sheath: 17oz
--Sheath Included: Yes
--Sheath Material: Black Leather
--Sheath Clip: Belt Loop
USA
-
Uberfire
$19.97Überfire is completely hydrophobic, which means it will not absorb water, so even if it gets wet, the user just needs to discard any standing water in the tin and then light it up. It is an excellent source of steady, intense heat that provides the user a means of drying out small tinder within his immediate proximity. The combustive materials in Überfire are specially formulated to assist in starting fires with whatever tinder is available, even wet tinder, and the more you fan Überfire, the hotter it gets. Überfire honors the three Ts of combustion, which are time, turbulence, and temperature. Überfire is made with all-natural, completely hydrophobic ingredients. The 2 oz. can will burn for approximately 20-30 minutes, depending on the conditions. There is a cotton pad saturated with petroleum jelly included in the tin as well. Überfire is designed to start from one spark. It will not evaporate even after partial use and can be lit multiple times. Although no synthetic materials were used in its creation, its not meant to be ingested or inhaled. Whether youre Special Forces, Military, SERE trained, Federal Agency Personnel, a pilot, an avid outdoorsman, or a hardcore bushcrafter or survivalist, Überfire is the ultimate last-resort fire option for you. SPECIFICATIONS: Weight is 2 oz. with the tin. Height: 3/4" Diameter: 2 5/8" Country of Origin: USA
-
Tex Creek XL 6
$144.97TOPS Tex Creek XL - 1095 High Carbon Steel - Black Canvas Micarta Handle - Brown Leather Sheath. The Tex Creek XL is a fine example of a high quality, good looking working knife. Field tested by the crew at TOPS this allows the opportunity to evaluate the use of the Tex Creek under the most adverse conditions. TOPS is proud to bring the Tex Creek - it passed with flying colors. SPECIFICATIONS: --Blade Steel: 1095 High Carbon --Blade Shape: Modified Drop Point --Blade Finish: Black River Wash --Blade Edge: Plain Edge --Handle: Black Canvas Micarta with Red Spacers over full tang construction. --Blade Length: 6.13" --Overall Length: 11.13" --Knife Weight: 9.6 oz --Weight with Sheath: 12.8 oz --Brand: TOPS --Model Name: Tex Creek XL --Model Number: TEX-XL --Item Number: TOPSTEXXL --Country of Origin: USA NOTE: 1095 High Carbon Steel used in the knife may rust, stain or tarnish. Keeping the blade clean, dry and oiled may help preserve the finish. -
Mohawk Hunter
$147.00This lean working knife has been a standby for American and Canadian hunters alike. With a 4 3/4" cutting edge, it can be used on large and small game, plus a variety of camp chores. An excellent, solid choice for the outdoors. SELECT SPECS: --Overall Length: 10.00" --Blade Length: 5.00" --Cutting Edge: 4.75" --Blade Thickness: 0.190" --Blade Shape: Hunters Point --Blade Steel: 1095 RC 56-58 --Blade Finish: Black Traction Coating --Handle Material: Black Linen Micarta --Knife Weight: 9.1 oz --Weight w/ Sheath: 12 oz --Sheath Weight: 2.9 oz --Sheath Included: Yes --Sheath Material: Black Kydex --Sheath Clip: Rotating Spring Steel USA -
I.C.E. Dagger
$147.97The I.C.E. Dagger was designed with law enforcement and military personnel in mind. It will serve as a backup blade in case their firearm is inoperable or inaccessible. The ICE Dagger's compound grind combines a ferociously strong tip with an edge that slices effortlessly. It is comfortable in forward and reverse grips. The finger ring aids in rapid deployment and retention of the blade and has contours to maximize its ability to be used as an impact weapon. Includes Kydex sheath that provides multiple carry options. SPECIFICATIONS: --Overall Length: 7.75" --Blade Length: 3.00" --Cutting Edge: 2.88" --Secondary Edge: 2.88" --Blade Thickness: 0.130" --Blade Steel: 1095 High Carbon --Hardness: RC 56-58 --Blade Shape: Spear --Blade Grind: Compound Double Edge --Blade Edge: Plain Edge --Blade Finish: Black Cerakote --Handle Material: Textured Black G10 --Knife Weight: 4.5oz --Weight w/ Sheath 6.5oz --Sheath Included: Yes --Sheath Material: Black Kydex --Sheath Clip: None - Bead Neck Chain and Beta Loops Designer Andy Tran Country of Origin: USA -
Grandpa's Ax
$164.97GRANDPA'S AX: Excellent mix of size, weight and chopping power. This is the kind of tool that gets passed down. In 2016, a challenge was issued to the employees of TOPS Knives. Whoever can design the best hatchet, tomahawk, or ax will get it approved as a design, be credited as the designer, and TOPS will produce it. This hatchet was the winner of that contest. The winner? Lorenzo Espinoza Sr. Lorenzo is Leo's father. Leo is the President of TOPS Knives, the main designer, and the guy who approves all outside designs. You know what they say: like father, like son. Grandpas Ax is an excellent mix of size, weight, and chopping capability for a small hatchet. Weighing just under 1.5lbs, this is a tool that can be easily carried long distances, making it excellent for backpackers and minimalist campers. The weight is in the head of the hatchet and its shape leaves it balanced to chop very well for its size. SELECT SPECIFICATIONS: --Overall Length: 11.00" --Blade Length: 4.00" --Cutting Edge: 4.00" --Blade Thickness: 0.250" --Blade Steel: 1095 RC 56-58 --Blade Finish: Tumble Finish --Handle Material: Green Canvas Micarta --Ax Weight: 22.7oz --Weight w/ Sheath: 27.1oz --Sheath: Brown leather with belt loop. --Designer: Lorenzo Espinoza Country of Origin: USA -
Fire Starter Piggy Back
$26.97TOPS Fire Start Piggyback This piggyback Kydex carrier is hand-made. It holds the tops emergency 3 rod fire starter and has 2 mounting holes. The top hole is pre-made and the second hole is left for you to make. This way it will fit your own sheath. The piggyback comes with 2 mounting screws, and fits most manufacturer's Kydex sheaths. The piggyback setup holds close to the body of the sheath. The firestarter can be pulled out for use fairly easily. This is an unique innovation for guys who like piggybacking their gear. ...And most of all...if youre in an emergency situation....you'll be glad you have it available. SPECIFICATIONS: --Overall Length: 3.13" --Thickness: 0.25" diameter Country of Origin: USA -