This limited-edition Sprint Run™ expression of the Endela® Lightweight showcases Carpenter® Technology’s Micro-Melt PD#1, an air-hardening, cold-work die steel specially formulated to offer both superior wear resistance and toughness. Its advanced alloy composition is further enhanced by the CarTech® Micro-Melt powder metal process, which ensures an ultra-fine, extremely homogeneous grain structure. Functionally equivalent to CPM® CRU-WEAR®, this high-performance steel is the heart of this knife’s full-flat-ground PlainEdge™ blade. To make this elite Endela Lightweight even more distinctive, its blade is cloaked in a non-reflective titanium carbonitride (TiCN) coating and its fiberglass-reinforced-nylon (FRN) handle is injection molded in a deep burgundy color. Consistent with this stunning black-and-burgundy theme, its four-position pocket clip, lock bar, and handle hardware also sport durable black coatings.

SPECIFICATIONS:

--Overall Length:  8.10" (206mm)

--Blade Length:  3.41" (87mm)

--Steel:  Micro-Melt® PD#1

--Closed Length:  4.69" (119mm)

--Edge Length:  2.99" (76mm)

--Weight:  3.2oz (91g)

--Blade Thickness:  0.118" {3.0mm) ---Handle:  Burgundy FRN

--Clip Position:  AmbiTip 

--Carry Position:  4-position

--Lock TypeBack Lock

--GrindFull-Flat

Seki City Japan

NOTE:  This blade steel is high carbon - not stainless - keep clean, dry and lightly oiled.  Rust and corrosion are possible as with any high carbon steel blade.

This limited-edition Sprint Run™ expression of the Endura® 4 Lightweight showcases Carpenter® Technology’s Micro-Melt PD#1, an air-hardening, cold-work die steel specially formulated to offer both superior wear resistance and toughness. Its advanced alloy composition is further enhanced by the CarTech® Micro-Melt powder metal process, which ensures an ultra-fine, extremely homogeneous grain structure. Functionally equivalent to CPM® CRU-WEAR®, this high-performance steel is the heart of this knife’s full-flat-ground PlainEdge™ blade. To make this elite Endura 4 Lightweight even more distinctive, its blade is cloaked in a non-reflective titanium carbonitride (TiCN) coating and its fiberglass-reinforced-nylon (FRN) handle is injection molded in a deep burgundy color. Consistent with this stunning black-and-burgundy theme, its four-position pocket clip, lock bar, and handle hardware also sport durable black coatings.

SPECIFICATIONS:

--Overall Length:  8.70" (221mm)

--Blade Length:  3.80" (97mm)

--Steel:  Micro-Melt® PD#1

--Closed Length:  4.98" (126mm)

--Edge Length:  3.44" (87mm)

--Weight:  3.3oz (93g)

--Blade Thickness:  0.118" (3.0mm)

--Handle:  Burgundy FRN

--Clip Position:  AmbiTip 

--Carry Position:  4-position

--Lock Type:  Back Lock

--Grind:  Full-Flat

Seki City Japan

NOTE:  This blade steel is high carbon - not stainless - keep clean, dry and lightly oiled.  Rust and corrosion are possible as with any high carbon steel blade.

CA65339 (6.51009 1/2 SS) Case XX one blade Barlow with 6.5 BoneStag Handles. Stainless Steel Clip blade.  Pinched nickel silver bolster.  3 3/8" closed.

USA

NOTE:  6.5 BoneStag is a natural material and will vary in coloration and grain from knife to knife.  Picture is representative.

Show your love for CRK!  Featuring 4 vinyl stickers perfect for slapping on anything from your toolbox, water-bottle, child, or any other stickable surface. Rated for 2-4 year outdoor use (so go ahead, slap 'em on your car).

No Wimps Printed on 3" wide vinyl.

Shop Dog This 3" sticker features Sisi the Border Collie; aka the Chris Reeve Knives Shop dog, aka, our Production Manager in Training, aka our daily comedic relief.

CR Logo Represent CRK with a classic "CR" logo coming in at 1.9".

TTCO Featuring the Sebenza 31; 2.5" square.

Complement your side table and your coffee mug.

CRK leather coasters bring a rugged and handsome air to your living room table. Engraved with our distinguished CRK logo and made of natural saddle skirting leather, this commodity is appreciated for its balance of durability and softness.

Made by Gfeller Casemakers in Meridian, Idaho.

This collectible sticker pack features five clear knife stickers illustrated in Boise, Idaho. Featuring a sampling of folding knives by Chris Reeve Knives: the Umnumzaan, Large Sebenza 31, Impinda, Small Inkosi, and Mnandi. The stickers are sized proportionately to each other, with the largest sticker at just under 5". 

Application tip:  Fingerprints will appear on these clear stickers if you touch the adhesive side. Handle the stickers by the edges and peel the backer with care!

Rated for 2-4 years of outdoor use, so go wild - stick 'em next to your car's stick figure family.

No one works harder than a rancher or a farmer. And their work environment can put a variety of demands on a simple folding knife. But our new Ranch Boss II can meet just about any challenge your work can dish out! Designed from the ground up for usefulness, durability and effectiveness, it offers a long, sharp, clip point blade that's flat ground out of high carbon steel. Honed razor sharp it folds up into an equally tough handle. Made with faux sawed bone handle scales, and reinforced with tough stainless steel bolsters, it will outlast nearly any brass frame folding knife. What's more, it comes with a stiff back spring (like a slip joint pocket knife) and a stainless steel liner lock, so your fingers will have extra protection.

SPECIFICATIONS:

--Weight: 5.2oz 

--Blade Thickness: 3.5mm 

--Blade Length: 4" 

--Blade Steel: SK-5 

--Handle Material:  Faux Sawed Bone

--Overall Length:  9-1/4" 

--Blade Shape:  Clip Point - full flat ground 

--Locking Mechanism:  Liner Lock

--Premium leather belt sheath.

PRC

PRE-OWNED

Buck 635GYSWM Misa Fixed Blade.  Features a 5" satin finished stainless blade.  Gray Micarta handle scales over full tang constuction.  Black hard-shell belt sheath.  9 3/8" overall.

Knife is near mint.  No signs of use or carry.  Original factory edge.  Original box in very good conditon.  

NOTE:  While this Buck is in excellent near mint condition, be advised we obtained this from a collector, so please consider it used.

PRE-OWNED

Buck 857ORSWM El Morro Fixed Blade.  Features a 3 1/8: satin finished stainless blade.  Textured Orange FRN handle scales over full tang constuction.  Black hard-shell belt sheath.  7" overall.

Knife is near mint.  No signs of use or carry.  Original factory edge.  Original box in very good conditon.  Extra belt loop attachment included.

NOTE:  While this Buck is in excellent near mint condition, be advised we obtained this from a collector, so please consider it used.

PRE-OWNED -- NEAR MINT

Spyderco C45SBL Rescue Blue 79MM.

  This is a vintage Spyderco Rescue Blue in excellent condition.  Features a 3" fully serrated blunt sheepsfoot blade of VG-10 stainless steel.  Blue FRN handles.  Stainless pocket clip.  Original box.

Knife is near mint.  No signs of use or carry.  Original factory Spyderedge.  Box in great condition showing only light storage.  There were no papers in the box.

NOTE:  While in excellent condition, be advised we obtained this from a collection, so please consider it used.

Spyderco C11ZFPDCMO Delica Spyderco Delica Flat Ground Plain Edge with Desert Camo Zome handles. Features: 3D handle shape with Volcano grip. Nested steel liners. Flat gound blade, 4-way pocket clip. Blade Steel: VG-10 Stainless. Edge Type: Plain Edge. Handle Material: Fiberglass Reinforced Nylon. Blade Length: 2 7/8". Length Closed: 4 1/4". Length Overall: 7 1/8". Seki City. NOTE: As each handle is individually hand crafted with the Zome coloration, each knife will vary slightly in coloration.

German Boker Tree Brand full size two blade Trapper with Smooth Gray Bone handle scales.   Features high polished D2 Steel Clip and Spey blades.  Brass pins and liners.  German Tree Brand inlay shield. 

4 1/8" closed.

Germany